363 F. Supp. 1191 | Cust. Ct. | 1973
This case involves the classification of articles imported from England in March and April 1964 and March 1965. The entry documents filed at New York described the articles as fan and pump shaft bearing assemblies. The record establishes that the articles are known in the trade as integral shaft bearings.
Customs officials classified the bearings as parts of pumps for liquids, dutiable at 12 per centum ad valorem under TSUS (Tariff Schedules of the United States) item 660.90. Plaintiff’s complaint alleges that the bearings are “more than” parts of pumps for liquids and should, therefore, be classified either as parts of piston-type engines, dutiable under TSUS item 660.52, or as parts of motor vehicles dutiable under TSUS item 692.25.
Defendant, in its answer to the complaint, asserts that the bearings were properly classified as parts of pumps for liquids and if not, then, at the times of these importations, the bearings are of a kind more specifically described in item 680.35, as ball or roller bearings, than as parts of piston-type engines or parts of motor vehicles.
The item provisions here in dispute provide in pertinent part as follows:
Classified under:
Schedule 6.-Metals and Metal Peoducts
Part 4.-Machinery and Mechanical Equipment
* * * * * * *
Subpart A.-Boilers, Non-Electric Motors and Engines, and other General Purpose Machinery
* * sfc * ¡Ü # #
*3 660.90 Pumps for liquids, whether or not fitted with measuring devices; liquid elevators of bucket, chain, screw, band, and similar types; all the foregoing, whether operated by hand or by any kind of power unit, and parts thereof- 12% ad val.
Defendant’s alternative claim:2
Schedule 6.-Metals and Metal Peoducts Part 4. - Machinery and Mechanical Equipment
******* Subpart J.-Parts of Machines *******
680.35 Ball or roller bearings, and parts thereof— Claimed under:
3.40 per lb. + 15% ad val.
Schedule 6.-Metals and Metal Peoducts
Part 4.-Machinery and Mechanical Equipment
*******
Subpart A.-Boilers, Non-Electric Motors and Engines, and Other General Purpose Machinery
* ‡ * S& ❖ ❖ #
Internal combustion engines and parts thereof:
$$$$$$$
Parts:
*******
Other parts:
52 Parts of piston-type engines other than compression-ignition engines- 8.5% ad val,
Plaintiff’s alternative claim:
Schedule 6.— Metals and Metal Peoducts
Part 6. - Transportation Equipment
*******
Subpart B.-Motor Vehicles
******* Chassis, bodies (including cabs), and parts of * * * motor vehicles:
*******
*4 692.25 Other_ 8.5% ad val.
TSUS, in its General Headnotes and Rules of Interpretation, provides a rule for the classification of “parts” of articles as follows:
10. General Interpretative Rules. For the purposes of these schedules—
* # # # # % %
(ij) a provision for “parts” of an article covers a product solely or chiefly used as a part of such article, but does not prevail over a specific provision for such part.
Defendant’s alternative claim under TSUS item 680.85 aside (which in view of the result I have reached it is unnecessary to consider), it is apparent that both sides concur in the view that the imported bearings are properly classifiable as parts of an article described in TSUS. The question that is then presented for decision is whether the imported bearings are parts of pumps for liquids, as classified by customs, or parts of piston-type engines or motor vehicles, as plaintiff claims. Where both sides profess that imported articles are “parts” of an article described in TSUS, this court has consistently held that “[a]s between competing provisions for ‘parts’ the one which provides for parts of that article of which the importation is most immediately a part is a ‘specific provision.’ ” (Emphasis quoted.) Castle & Cooke, Inc. v. United States, 68 Cust. Ct. 75, C.D. 4839 (1972).
The facts establish that the imported bearings in the manner of their use are a component for an article sold as an auto water pump, and that the water pump is bolted to the engine block of a motor vehicle to move water from the radiator to cool the engine. Quite clearly, therefore, insofar as a water pump and an engine block have common association in a motor vehicle, the imported bearings are most immediately components or parts of the water pump, rather than components or parts for the engine or components or parts for the motor vehicle. Korody-Colyer Corp. v. United States, 66 Cust. Ct. 337, C.D. 4212 (1971); American Express Company v. United States, 65 Cust. Ct. 343, C.D. 4100 (1970); C. F. Liebert v. United States, 60 Cust. Ct. 677, C.D. 3499, 287 F. Supp. 1008 (1968).
What remains to be considered is plaintiff’s contention that the imported bearings are “more than” parts of water pumps because, as a matter of fact, they are designed and intended to perform coequal functions with the water pump component and, inter cilia, fan component of a motor vehicle.
Relevant to plaintiff’s “more than” theory, the following physical and testimonial facts are of record.
Exhibit 4 is a mock-up of the front end of a motor vehicle illustrating the manner in which a pulley with four holes (exhibit 5) is fitted on the fan hub that is pressed on the imported shaft; a fan with a neck and hub with four holes, all one piece, is positioned on the short end of the shaft that protrudes through the pulley so that it is properly aligned with the pulley in a fashion that the fan and pulley can be and are bolted through the four holes to the fan hub. The mock-up also illustrates additional pulley attachments to the crankshaft, air conditioner, air injection pump, generator, and power steering components of a motor vehicle. There are belts passing around the fan hub pulley (four belts on the illustrative exhibit) to the various other pulley connections; working off power that comes from the crankshaft.
Plaintiff’s witnesses testified that the bearing incorporated in the pump is rotated by the belts that pass from the crankshaft pulley to the pulley mounted on the fan hub of the bearing. In rotating, the bearing transmits power to the water pump impeller and also drives the fan. The bearing additionally takes the load created by the power that is transmitted to other components of a motor vehicle such as an
Failures associated with integral shaft bearings, in the experience of the witnesses for both sides, involved the shaft being broken at the load-bearing fan hub and under stress of supporting the fan and taking the radial load arising from the various belt drives. To forestall such failures the shaft of the imported integral shaft bearings were designed and strengthened to accept the pulley-fan attachment and the increased loads created by the power transmitted to the other components, without breaking.
The water pump (exhibit 3) is sold as an auto water pump but, in the opinion of plaintiff’s witnesses, it is not a complete pump until it is bolted to the engine block. That opinion brought them to conclude that exhibit 3 is less than a pump, but they also concluded that the imported bearings were more than part of a pump because the bearing functions as a support bracket for the fan and also drives the auxiliary components. The imported shaft bearings are sold to manufacturers of auto water pumps. A generator, water pump and crankshaft are basic components of all motor vehicles with water-cooled engines. Air conditioners, power steei’ing and air injection pumps are optional equipment in motor vehicles. The water pump in a water-cooled engine functions continually but a fan clutch will stop the fan at certain speeds while the shaft bearing continues to spin the impeller of the pump.
Defendant’s witness expressed the opinion that the primary function of the imported bearings was the water pump function because the fan clutch can cut the fan off and the components not associated with the pump can be powered directly off the crankshaft drive.
It is apparent that these imported shaft bearings are the evolutionary answer of the automotive industry to the problem of joining and operating optional equipment developed by engineers in connection with motor vehicles. The issue posed by plaintiff’s “more than” theory is whether the imported shaft bearings are a part for a pump* (auto water pump) for liquids eo nomine provided for in T'STJS item 660.90, as classified, or something more than such a part, to wit, a combination article so as to be classifiable under TSUS item 660.52 or 692.25 as plaintiff contends. This issue is similar to that considered by the court of appeals in United Carr Fastener Corporation v. United States, 54 CCPA 89, C.A.D. 913 (1961), and Trans-Atlantic Company v. United States, 60 CCPA 100, C.A.D. 1088 (1973).
* * * The fact that a function, previously performed 'by a washer, which at best is but auxiliary when associated in use with a nut, was eliminated in this evolutionary process, contributed to the improvement of, rather than a change in identity of the article as a nut, in our opinion. And the further fact that the evolved “tee nut” took on the added character of immobility does nothin our opinion, militate against the article continuing to be a species of nut. According to some of the above noted definitions, shape (square or hexagonal) of á nut is a condition facilitating the manipulation of the article. And this condition of maneuverability was simply improved upon in the evolution of the “tee nut”.
In Trans-Atlantic, it was claimed that a device, which was “a kind of .hinge” and eo nomine classified under TSTJS as a hinge, should be classified under the TSUS provision for door closers and parts thereof of base metal. Trans-Atlantic contended that although the device was concededly “a kind of hinge” it was “more than a hinge” because it also closed the door and was, therefore, “a kind of door closer”. The device functioned to hang or hold a door in place and to close the door automatically. The court of appeals affirmed the judgment of this court which found that the device comported with the dictionary definition of “hinge” and was, therefore, properly classifiable within an eo nomine provision for hinges. The opinion written for the court of appeals washed out the Trans-Atlantic contention that the device was more than a 'hinge stating:
* * * Concededly, it is also more than a door closer which would, under appellant’s argument, also remove it from a 646.95 classification. Appellant would, therefore, at most have only a dry run. Anyway, we think that the primary function of the imported article should govern classification. See E. Green & Son (New York), Inc. v. United States, 59 CCPA 31, 450 F. 2d 1396, C.A.D. 1032 (1971); United Carr Fastener Corp. v. United States, 54 CCPA 89, C.A.D. 913 (1967).
The spring hinges at bar were primarily designed and constructed to function as hinges. Classification on the basis of its auxiliary function * * * would be tantamount to letting the tail wag the dog.
The factual situation in this case, relevant to plaintiff’s theory that the imported integral shaft bearings are more than parts for auto water pumps, in my opinion, is not substantively distinguishable from the factual situations and contentions presented in United Garr and Trans-Atlantic. Based on the physical and testimonial factual evidence of record, I find that the imported integral shaft bearings are a component, primarily designed for an auto water pump and that without the integral shaft bearings there would be no auto water pump as such. While plaintiff’s witnesses were of the opinion that the imported integral shaft bearings are designed to perform coequal functions in a motor vehicle, defendant’s witness had a contrary opinion and the physical evidence which weighs greater established that the integral shaft bearings are primarily designed to serve as a component of an auto water pump. In the condition imported, the integral shaft bearings have, not two coequal functions, but one primary use or function, namely, as a component for an auto water pump. Indeed, the integral shaft bearings cannot function in any intended manner until first incorporated as a component of an auto water pump. The pulley-fan attachment and power load-bearing functions come into play only incidentally after the auto water pump is attached to the engine block of a motor vehicle.
Plaintiff’s peripheral argument that the imported bearings are not parts of a pump, because the article assembled from the bearing and other components is not a complete pump until it is bolted to an engine block, if its substance were not factually doubtful,
At the time of these importations, the tariff law aid not specifically provide for integral shaft bearings. Subsequent to these importations, in late 1965, Congress enacted the Technical Amendments Act of 1965, 79 Stat. 933, 940, to include a specific tariff provision for intergral shaft bearings presently identified in the Tariff Schedules of the United States as item 680.33.
Defendant’s alternative claim is a recognized tactic in defense of an erroneous classification. Herrmann & Jacobs, Inc. v. United, States, 29 CCPA 279, C.A.D. 203 (1942) ; A. L. Erlanger Co., Inc. v. United States, 50 Cust. Ct. 74, 76, C.D. 2392 (1963), affirmed 51 CCPA 51, C.A.D. 836 (1964).
Two witnesses testified for plaintiff and one witness testified for defendant.
Exhibit 1 is a catalog of “Automobile Ran and Water Pump Spindle Bearings”.
Exhibit 7 is an engine belt and pulley chart showing the manner in which the various pulley and belt attachments can be arranged should a purchaser of a motor vehicle opt for one or more of the components requiring a pulley attachment. The generator, water pump and crankshaft pulleys are basic in all motor vehicles that have water-cooled engines.
Exhibit 8 is a sample of a shaft bearing used to support the fan in a motor vehicle with an air-cooled engine.
See, e.g., 2 Encyclopaedia Britannica 870 (1970) in which an automobile cooling system is broten down into elements which are: channels cast into engine block, radiator, water pump, thermostat and fan.
