OPINION
This consolidated action concerns the claims raised by Peer Bearing Company (“Peer Bearing”), a plaintiff, and The Timken Company (“Timken”), a plaintiff and a defendant-intervenor. Peer Bearing and Timken move pursuant to Rule 56.2 of the Rules of this Court for judgment on the agency record challenging the Department of Commerce, International Trade Administration’s (“Commerce”) final determination, entitled Final Results of Anti-dumping Duty Administrative Review and Revocation in Part of Antidumping Duty Order on Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China, 62 Fed.Reg. 6189 (Feb. 11,1997).
Peer Bearing asserts that Commerce erred in: (1) selecting an allegedly punitive dumping margin for certain transactions of Peer Bearing on the basis of best information available (“BIA”) to Commerce; (2) failing to issue a separate rate determination for East Sea Bearing Company Ltd. (“East Sea Bearing”); and (3) committing a clerical error in applying *1292 BIA to certain models for which factors of production (“FOPs”) were available.
Timken claims that Commerce erred in: (1) selecting Indonesian, rather than Indian, import statistics for valuing bearing-quality steel used to manufacture tapered roller bearings (“TRBs”) cups and cones; (2) failing to adjust overhead, selling, general and administrative expenses (“SG & A”) and profit rates to account for differences in material and labor values of other surrogate sources used in determining foreign market value (“FMV”); (3) failing to use Indian material and labor costs data in the calculation of overhead, SG & A and profit rates; (4) adjusting FMV by the exporter’s sales price (“ESP”); (5) failing to adjust United States price for marine insurance costs based on value rather than weight; and (6) revoking the antidumping duty order with respect to Shanghai General Bearing Co., Ltd. (“Shanghai General”), a defendant-intervenor in this action.
BACKGROUND
The administrative review at issue covers the period of review from June 1, 1993, through May 31, 1994. 2 Commerce published the preliminary results of the subject review on September 26, 1995. See Preliminary Results of Antidumping Administrative Review of Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People’s Republic of China (“Preliminary Results ”), 60 Fed. Reg. 49,572. On Feb. 11, 1997, Commerce published the Final Results at issue. See 62 Fed.Reg. 6189.
JURISDICTION
The Court has jurisdiction over this matter pursuant to 19 U.S.C. § 1516a(a) (1994) and 28 U.S.C. § 1581(c) (1994).
STANDARD OF REVIEW
In reviewing a challenge to Commerce’s final determination in an antidumping administrative review, the Court will uphold Commerce’s determination unless it is “unsupported by substantial evidence on the record, or otherwise not in accordance with law ....” 19 U.S.C. § 1516a(b)(l)(B)(i) (1994).
I. Substantial Evidence Test
Substantial evidence is “more than a mere scintilla. It means such relevant evidence as a reasonable mind might accept as adequate to support a conclusion.”
Universal Camera Corp. v. NLRB,
*1293 II. Chevron Two-Step Analysis
To determine whether Commerce’s interpretation and application of the antidumping statute is “in accordance with law,” the Court must undertake the two-step analysis prescribed by
Chevron U.S.A. Inc. v. Natural Resources Defense Council, Inc. (“Chevron
”),.
If, after employing the first prong of
Chevron,
the Court determines that the statute is silent or ambiguous with respect to the specific issue, the question for the Court becomes whether Commerce’s construction of the statute is permissible.
See Chevron,
DISCUSSION
I. Commerce’s Use op Best Information Available
A. Background
During the period of review, Peer Bearing, through Chin Jun Industrial Ltd. (“Chin Jun”), a reseller of TRBs and an affiliate of Peer Bearing, made purchases of the merchandise at issue from various exporters from the People’s Republic of China (“PRC”). See PL’s Mem. P. & A. Supp. PL’s Rule 56.2 Mot. J. Agency R. (“Peer Bearing’s Mem.”) at 2. Peer Bear *1294 ing, in turn, resold the merchandise in the United States and in third-country markets. See id.
Because the PRC is a nonmarket economy, Commerce, acting under the mandate of 19 U.S.C. § 1677b(c) (1988), calculated FMV on the basis of FOPs data. See id. at 3. Commerce sought and obtained FOPs data for some but not all of the exporters utilized by Chin Jun. See id. Consequently, Commerce applied BIA to the United States sales of the merchandise on which FOPs data was unavailable. See id. BIA was based on the higher of: (1) the highest of the rates found for Peer Bearing in the less than fair value (“LTFV”) investigations in the prior reviews; or (2) the highest margin calculated for any respondent in the review at issue. See Final Results, 62 Fed.Reg. at 6214. Applying this methodology, Commerce determined the dumping margin for the merchandise on which FOPs data was unavailable, the rate equal to the rate determined for another respondent in the review. See id.
B. Contentions of the Parties
Peer Bearing contends that Commerce’s reliance on BIA was improper because the missing data was beyond the control of Peer Bearing.
See
Peer Bearing’s Mem. at 5-6 (citing
Usinor Sacilor v. United States,
Commerce asserts that the language of 19 U.S.C. § 1677e(c) allows Commerce .to rely on BIA in a situation as the one in the case at bar.
See
Def.’s Mem. Opp’n Pis.’ Mots. J. Agency R. (“Def.’s Mem.”) at 11-12. Commerce also maintains that the BIA used did not amount to “punitive” BIA because: (1) the BIA used was a “partial” BIA,
see id.
at 14 — 16; and (2) Commerce did not reject “low margin information in favor of high margin information that was demonstrably less probative of current conditions.’ ”
Id.
at 16 (quoting
Rhone Poulenc, Inc. v. United States,
Timken supports Commerce’s position noting that: (1) Commerce’s reliance on BIA was consistent with Commerce’s practice as scrutinized by courts’ interpretations of the relative statutory provision; and (2) Commerce’s selection of partial BIA did not amount to a punitive action. See Timken’s Opp’n Pl.’s Mot. J. Agency R. (“Timken’s Opp’n”) at 8-15.
C. Analysis
1. Commerce’s Reliance on BIA
In conducting an antidumping investigation, Commerce is charged with calculating margins as accurately as possible.
See Rhone Poulenc,
*1295
The legislative goal behind Commerce’s right to use facts available is to “induce respondents to provide Commerce with requested information in a timely, complete, and accurate manner .... ”
National Steel Corp. v. United States,
promptly ... notifies [Commerce] that such party is unable to submit the information requested in the requested form and manner [and provides Commerce] with a full explanation and suggests] alternative forms in which such party is able to submit the information, [Commerce] shall consider the ability of the ... party to submit the information in the requested form and manner and may modify [Commerce’s] requirements
19 U.S.C. § 1677m(c)(l) (1994) (a later codification of Commerce’s practice at the time of the review, emphasis supplied).
Consequently, Commerce enjoys very broad, although not unlimited, discretion with regard to the propriety of its use of BIA.
See generally, Olympic Adhesives, Inc. v. United States,
In addition, a regulation implementing 19 U.S.C. § 1677e(c), 19 C.F.R. § 353.37 (1994), allows Commerce to resort either to total or to partial BIA.
See National Steel,
In this case, Commerce chose to apply partial BIA to Peer Bearing’s sales of the merchandise for which the requested information was deficient because the deficiency affected Commerce’s ability to make the determination only to a limited extent.
See Final Results,
62 Fed.Reg. at 6210-11. Commerce’s general decision to resort to partial BIA, therefore, was entirely justified under the mandate of the applicable statute and. regulation, see 19 U.S.C. § 1677m(c)(l); 19 C.F.R. § 353.37, and Peer Bearing’s substantial level of cooperation does not render Commerce’s decision invalid in view of: (1) the discretion specifically afforded to Commerce by the language of 19 U.S.C. § 1677m(c)(1), particularly, in light of
National Steel,
2. Commerce’s Use of Allegedly Punitive BIA
Peer Bearing contests the assignment of the particular BIA rate that Commerce chose. See PI.’s Mem. at 4. Peer Bearing asserts that the particular rate is “punitive,” see id., and requests the Court to direct Commerce to assign a “neutral” BIA rate. See id. at 9-10.
First, the regulation implemented under the statute provides that Commerce is entitled to resort to BIA if Commerce “(1) [d]oes not receive a complete, accurate, and timely response to [its] request for factual information; or (2)[i]s unable to verify, within the time specified, the accuracy and completeness of the factual information submitted.” 19 C.F.R. § 353.37(a). The language of § 353.37(a) is a practical implementation of the statutory mandate that serves as a mechanism preventing the impediments to investigation proscribed by the statute. See 19 U.S.C. § 1677e(b) (1988). Thus, Commerce acted fully in accordance with the controlling provisions.
Second, the Court is not convinced that the particular rate chosen by Commerce is a punitive one. “Commerce’s use of uncooperative BIA does not necessarily make the resulting rate ‘punitive’ in nature _”
Transcom, Inc. v. United States,
24 CIT -, -,
Therefore, Commerce was free to choose a rate Commerce determined to be appropriate because the proposed low margin information was not “demonstrably [more] probative of current conditions.” Final Results, 62 Fed.Reg. at 6211.
II. Separate Rate for East Sea Bearing Company Ltd.
A. Background
East Sea Bearing, a Chinese reseller, purchased TRBs from Chinese manufacturers and then resold that merchandise to Peer Bearing. See Peer Bearing’s Mem. at 3. In the review at issue, East Sea Bearing was neither named as a respondent nor subject to any request for review of its entries. See id. Nonetheless, one week prior to publication of the Preliminary Results, East Sea Bearing submitted a voluntary response to Commerce’s sepa *1297 rate-rates questionnaire. 5 See Peer Bearing’s Reply at 11.
B. Contentions of the Parties
Peer Bearing contends that Commerce’s decision not to issue a separate rate for East Sea Bearing was unsupported by substantial evidence and not in accordance with law. See Peer Bearing’s Reply at 11-13.
Commerce maintains that it acted reasonably in declining to assign a separate rate to East Sea Bearing. See Def.’s Mem. at 18-20. Timken supports the conclusion reached by Commerce and points out that at a later review Commerce assigned a separate rate to East Sea Bearing, thereby making any amendment to the determination at issue obsolete. 6
C. Analysis
Commerce’s antidumping regulations provide that factual information solicited through the means of questionnaires must be submitted by the deadline stated in such questionnaires. See 19 C.F.R. § 353.31(b)(2) (1994). Furthermore, “questionnaire responses in administrative reviews must be submitted not later than 60 days after the date of receipt of the questionnaire.” 19 C.F.R. § 353.31(b)(4) (1994).
Commerce’s questionnaires pertinent to the matter were issued between December 5 and 9, 1994, and bore a submission deadline of January 3, 1995. See Def.’s Mem. at 18-19. East Sea Bearing’s response, submitted on September 18, 1995, was received “much too late for timely consideration by Commerce in the relevant review period. 7 Even if Commerce wanted to be generous with the imposed deadline for such responses, Commerce regulations allow for no more than 60 days to respond.” Id. at 19. Consequently, Commerce was *1298 correct in declining to consider East Sea Bearing’s submission. Under the governing regulatory regime, the mere fact that Commerce assigned a separate rate to another volunteer respondent, Xiangfan International Trade Corporation, that entered its response within the allotted time period, does not obligate Commerce to assign a separate antidumping rate to East Sea Bearing.
III. Commerce’s Ministerial Error
In the
Preliminary Results,
Commerce applied BIA to several models of Peer Bearing’s merchandise on the assumption that FOPs data had not been provided for these models, when, in fact, it had been provided.
See
60 Fed.Reg. 49,572. Being alerted to the issue by Peer Bearing, in the
Final Results
Commerce agreed to correct these clerical errors.
See
IV. Commerce’s Selection of Indonesian Import Statistics as a Surrogate Value for Raw-Material Costs of Steel Used by Chinese Producers
A. Background
Antidumping margins are the difference between FMV and United States price of the merchandise. When the merchandise is produced in a nonmarket economy country (“NME”), such as the PRC, Commerce constructs FMV pursuant to § 1677b(c), which provides that
the valuation of the factors of production shall be based on the best available information regarding the values of such factors in a market economy country or countries considered to be appropriate by [Commerce].
19 U.S.C. § 1677b(c)(l) (1988) (emphasis supplied).
The statute does not define the phrase “best available information,” it only provides that
[Commerce], in valuing factors of production^] ... shall utilize, to the extent possible, the prices or costs of factors of production in one or more market economy countries that are[:] (A) at a level of economic development comparable to that of the nonmarket economy country, and (B) significant producers of comparable merchandise.
19 U.S.C. § 1677b(c)(4) (1988) (emphasis supplied).
Thus, the statute grants Commerce broad discretion to determine the “best available information” in a reasonable manner on a case-by-case basis.
See Lasko Metal Prods., Inc. v. United States,
During this review, Commerce initially chose India as the primary surrogate country to value all FOPs,
see Preliminary Results,
60 Fed.Reg. at 49,574, because Commerce believed Indian import statistics constituted the best information available for valuing the merchandise at issue.
See id.
at 49,575. After considering comments that questioned the use of Indian import statistics, Commerce re-examined the matter.
See Final Results,
Upon examining the Indian import statistics, Commerce found that bearing-quality steel used to manufacture the merchandise at issue was most likely contained in category 7228.30 comprised of several eight-digit sub-categories. See id. After elimination of those specific eight-digit sub-categories that did not cover the steel used to produce the merchandise at issue, Commerce was left to consider the only remaining sub-category, 7228.30.19, designated as “other” type of steel. See id. Commerce, however, had no information concerning this “other” type of steel and whether this category specifically isolated the steel used to produce the merchandise at issue. See id.
Examining the data further, Commerce observed that the average value of steel in this “other” type of steel sub-category was greater than the average value of steel in category 7228.30. In addition, Commerce compared the average value of general category 7228.30 to pertinent import data regarding the United States and found that, during the period of review, the average value of steel included in Indian category 7228.30 was significantly higher than the average value of the analogous steel imported into the United States. See id. Consequently, Commerce: (1) determined that the Indian import data that it used in the Preliminary Results, 60 Fed.Reg. at 49,574, were not reliable, see Final Results, 62 Fed.Reg. at 6195-96; and (2) concluded that the import data from a secondary surrogate, Indonesia, a producer of merchandise comparable to that at issue, would constitute the best information available to value steel used to produce the merchandise at issue. See id. at 6196. Commerce stated that
unlike the Indian data, the Indonesian six-digit category 7228.30 closely approximates the value of [United States] imports of [steel of analogous quality] .... Thus, [Commerce] ... determined that Indonesian category 7228.30, which is the narrowest category [Commerce] can determine [that] would contain [steel of analogous quality], is the best available information for valuing steel used to produce [the merchandise at issue,] [although Indonesia is not the first-choice surrogate country in this review
Id.
B. Contentions of the Parties
Timken, acting in its capacity as plaintiff, asserts that: (1) Commerce’s refusal *1300 to use Indian data was unjustified, see Timken’s Mem. P. & A. Supp. Mot. J. Agency R. (“Timken’s Mem.”) at 17-31; (2) Commerce’s reliance on Indonesian data and the United States benchmark was unreasonable, see id. at 20-26; and (3) Commerce’s decision to use Indonesian data for the first time in the Final Results after indicating in the Preliminary Results that Indian data would be used constituted an unjustified change in methodology and deprived Timken of the opportunity to comment on the change and to provide supplemental information. 8 See id. at 29.
Commerce maintains that its determination and the underlying analyses were reasonable, in accord with the mandate of 19 U.S.C. § 1677b(c) (1988) and the level of discretion afforded to Commerce by
Chevron,
Peer Bearing and Shanghai General support Commerce’s position and point out that: (1) Commerce may choose among available alternatives so long as the choice is reasonable and based on substantial record evidence; (2) Commerce reasonably considered the United States import statistics as a benchmark to determine the reliability of Indian import statistics; and (3) Commerce was justified in using Indonesian data for the first time in the Final Results. See Peer Bearing’s Resp. PI. Timken’s Mot. J. Agency R. of Aug. 28, 1998 (“Peer Bearing’s Resp. of Aug. 28”) at 6-13; Shanghai General’s Mem. P. & A. Opp’n PL’s Mot. J. Agency R. (“Shanghai General’s Mem.”) at 5-15.
C. Analysis
1. Commerce’s Changes of Policy or Methodology
Agency statements provide guidance to regulated industries. While “ ‘an agency does not act rationally when it chooses and implements one policy and decides to consider the merits of a potentially inconsistent policy in the very near future,’ ”
Transcom, Inc. v. United States,
24 CIT -, -,
An agency decision involving the meaning or reach of a statute that reconciles conflicting policies “ ‘represents a reasonable accommodation of conflicting policies that were committed to the agency’s care by the statute, [and a reviewing court] should not disturb [the agency decision] unless it appears from the statute or its legislative history that the accommodation is not one that Congress would have sanctioned.’ ”
Id.
at 845,
Moreover, “ ‘[a]n [agency] announcement stating a change in the method ... is not a general statement of policy.’ ”
American Trucking Ass’ns, Inc. v. ICC,
2. Agency’s Reconsideration of Its Determination After Issuance of Preliminary Results
An agency’s reconsideration of its determination after issuance of prelimi
*1302
nary results does not necessarily mean that the parties affected by the determination have been denied due process of law. A party subject to or affected by the review does not have a due process right to notice and comment on the agency’s change in position if, throughout the agency’s investigation, the party was reasonably on notice that the agency was considering the alternative ultimately used in the final determination.
See Tehnoimportexport v. United States,
[An agency] is not required to afford interested parties an unlimited opportunity to comment on each modification of the agency’s practice or procedure. To provide otherwise would be to unnecessarily burden the agency with an unending cycle of notices, comments, and responses.
British Steel PLC v. United States,
While Timken notes that “Commerce [did not] vet [sic.] the idea of
using
Indonesian statistics during the comment period,” Timken’s Mem. at 6 (emphasis supplied), Timken does not dispute that Indonesia
ivas
an alternative surrogate choice that Commerce
could
consider,
9
See generally,
Timken’s Mem. Therefore, Timken was on notice about Commerce’s possible choices of data and Indonesian data in particular. Because the number of alternative surrogates is very small indeed,
see
19 U.S.C. § 1677b(c)(4), had Timken felt that all or some of the alternative choices were improper, Timken could have disputed — and would not be overly burdened had Timken chosen to dispute— these alternatives. Timken’s failure to exercise this right in a timely manner did not create an obligation on the part of Commerce to avail Timken to a second bite of the apple in the form of another “cycle of notices, comments, and responses.”
British Steel pic,
3. Commerce’s Decision to Use Indonesian Data
With respect to Timken’s challenge to Commerce’s decision to use Indonesian values, the Court finds that Timken is assailing not the reasoning but rather the result reached by Commerce, which is outside the Court’s standard of review.
See Writing Instrument Mfrs. Ass’n, Pencil Section v. United States (“Writing In
strument”),
[while, as] with the Indian data, [Commerce was] unable to isolate the value of [the] steel [at issue] or identify an eight- *1303 digit category ... containing such steel imported into Indonesia; however, unlike the Indian data, the Indonesian six-digit category 7228.30 closely approximates the value of [United States] imports of [the] steel [at issue], as well as the comparable six-digit category in the United States. Thus, [Commerce] determined that Indonesian category 7228.30, which is the narrowest category, ... is the best available information
Final Results, 62 Fed.Reg. at 6196 (pointing out that “Indonesia has previously been used as a source of surrogate data in cases involving the PRC”) and citing Notice of Final Determination of Sales at Less Than Fair Value: Certain Partial-Extension Steel Drawer Slides with Rollers From the People’s Republic of China, 60 Fed.Reg. 54,472, 54,475-76 (Oct. 24, 1995); Notice of Final Determination of Sales at Less Than Fair Value: Certain Cased Pencils From the People’s Republic of China, 59 Fed.Reg. 55,625, 55,629 (Nov. 8, 1994); Helical Spring Lock Washers, 58 Fed.Reg. at 48,835.
The Court is not in the position to declare such a conclusion unreasonable.
See Chevron,
Next, the Court rejects Timken’s assertion that Commerce erred in using United States data as benchmarks to test the reliability of the Indian import data for valuing the merchandise at issue. A comparison of surrogate data to that of market economy in order to determine the reliability of such surrogate data is within “ ‘Commerce’s statutory authority and consistent with past practice.’ ”
Peer Bearing Co. v. United States,
Finally, Commerce could reasonably find Indian data unreliable because Commerce has never adopted a numerical standard for identifying aberrational or questionable data and has properly exercised its statutory discretion by determining what information to use for valuing FOPs on a case-by-case basis. Indeed, during other reviews, Commerce has rejected as unsuitable surrogate data which varied from a benchmark to a much lesser extent than in this particular case. See, e.g., Final Determination of Sales at Less Than Fair Value: Circular Welded Non-Alloy Steel Pipe From Romania, 57 Fed.Reg. 42,957, 42,958 (Sept. 17,1992).
Y. Commerce’s Use of Unadjusted Skf India’s Overhead, Selling, General and Administrative Expenses and Profit Rates
A. Background
Section 1677b(c)(l) of Title 19 requires Commerce to determine FMV of the subject merchandise on the basis of the value of the FOPs utilized in producing the merchandise and to which shall be added an amount for general expenses and profit plus the cost of containers, coverings, and other expenses. See 19 U.S.C. § 1677b(c)(l). General expenses are the *1304 expenses that do not bear a direct relationship to the production of the merchandise at issue, such as SG & A expenses. The subsection also states that the valuation of FOPs “shall be based on the best available information regarding the values of such factors in a market economy country or countries considered to be appropriate by [Commerce].” Id. Section 1677b(c)(4) provides that, in valuing FOPs under paragraph (1) of § 1677b(c), Commerce “shall utilize, to the extent possible, the prices or costs of [FOPs] in one or more market economy countries ....” 19 U.S.C. § 1677b(c)(4).
Commerce has interpreted “the extent possible” language contained in 19 U.S.C. § 1677b(c)(4) as applicable to the calculation of the amount of general expenses and profit that is to be added to the FOPs referenced in paragraph (1) of § 1677b(c).
See
Def.’s Mem. at 38 (citing
Springfield Indus. Corp. v. United States,
Applying this interpretation during the review at issue, Commerce concluded that an appropriate surrogate for determining general expenses and profit was SKF India, an Indian producer of merchandise similar to the merchandise at issue. Consequently, Commerce determined overhead, SG & A, and profit rates from the information contained in SKF India’s financial report. See Def.’s Mem., Ex. 6 at 4-5; Final Results, 62 Fed.Reg. at 6193. Specifically, Commerce calculated the ratio of SKF India’s overhead costs to its cost of manufacturing (“COM”), that is, the cost of materials plus labor, and then applied this ratio to the Indonesian and Indian raw material costs and direct labor costs. Commerce explained that,
[i]n deriving these rates, [Commerce] used the SKF India data both with respect to the numerators (total overhead and SG & A expenses, respectively) and denominator (total cost of manufacturing). This methodology allowed [Commerce] to derive ratios of SKF India’s overhead and SG & A expenses. These ratios, when multiplied by FOP[s] [Commerce] used in [Commerce’s] analysis, thereby constitute the best available information concerning the overhead and SG & A expenses that would be incurred by a ... producer given such FOP[s].
Final Results, 62 Fed.Reg. at 6193.
B. Contentions of the Parties
Timken argues that, if Commerce did not use the SKF India report to value all FOPs, Commerce should adjust overhead and SG & A rates to reflect the use of lower material and labor values from the separate sources; that it would be distor-tive to include SKF India’s full materials and labor costs in the COM denominator unless SKF India’s full materials and labor costs were also the basis for valuing the raw materials and direct labor factors in the constructed value calculation.
See
Timken’s Mem. at 31-34 (relying on
Sigma Corp. v. United States (“Sigma”),
Commerce maintains that the methodology used allowed Commerce to derive in *1305 ternally consistent ratios of SKF India’s overhead and SG & A expenses. See Def.’s Mem. at 40-41; see also Final Results, 62 Fed.Reg. at 6193. Commerce contends that doing otherwise, that is, adjusting the underlying values of SKF India, would create a result no longer representative of SKF India’s costs. See Def.’s Mem. at 40-41. Specifically, Commerce pointed out that
[Timken’s] recommended adjustment would affect (reduce) the denominator, but it would leave the overhead and SG & A expenses in the numerator unchanged. As such, [Commerce] find[s] that this adjustment would itself distort the resulting ratio, rather than cur[e] the alleged distortion in [Commerce’s] calculations.
Final Results, 62 Fed.Reg. at 6193.
Peer Bearing supports Commerce’s conclusion and states that “Timken’s assertion that the application of the overhead/SG & A/profit ratios (derived from SKF India) to the material and labor costs (derived from other sources) ‘mixes apples and oranges’ and is incorrect.” Peer Bearing’s Resp. PI. Timken’s Mot. J. Agency R. of Feb. 18, 1998 (“Peer Bearing’s Resp. of Feb. 18”) at 16. Peer Bearing maintains that Commerce’s application of ratios for overhead, SG & A and profit derived from one source to COM values derived from another one is consistent with Commerce’s practice in other NME cases. See id. at 15-16 (citing Preliminary Determination of Sales at Less Than Fair Value: Coumarin From the People’s Republic of China (“Coumarin”), 59 Fed.Reg. 39,727, 39,729 (Aug. 4, 1994); Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, from the Republic of Romania, 61 Fed.Reg. 51,-472 (Oct. 2,1996)[sic] ). 10
C. Analysis
“In the absence of a statutory mandate to the contrary, Commerce’s actions must be upheld as long as they are reasonable.”
Timken Co. v. United States,
23 CIT —, -,
The Court is not convinced by Timken’s reference to
Sigma,
*1306 In the case at bar, Commerce derived overhead, SG & A, and profit rates from SKF India’s financial report; thus, SKF India’s rates are supported by substantial evidence on the record. Commerce also explained that the adjustment suggested by Timken would distort the experience of SKF India rather than cure any distortion in Commerce’s calculation. See Final Results, 62 Fed.Reg. at 6193. Moreover, the record does contain sufficient information regarding the surrogate, that is, SKF India, for purposes of the overhead, SG & A and profit calculations. 11
Although the Court could certainly question the perfection of Commerce’s approach, the Court holds that, under the circumstances, Commerce acted reasonably in not subtracting import duties from SKF India’s data. Commerce attempted to capture in its
rate
calculation the surrogate company’s experience in incurring overhead and SG & A expenses, and created a reasonable internally consistent
ratio
that, as imperfect as it might be, does not violate the boundaries set by 19 U.S.C. § 1677b(c). While the Court agrees with Timken’s contention that a
factor
chosen by Commerce should be fixed to a particular figure within parameters of a single determination, it does not follow that the
ratio
applied by Commerce to the factors under consideration should necessarily be derived from the fixed factors. The mere fact that one of the actual factors is likely to be higher while the other one is likely to be lower than the corresponding data derived from the records of SKF India does not empower the Court to uphold Timken’s suggestion as a more palatable alternative.
See American Spring Wire,
VI. Commerce’s Use of Labor Data from Investing, Lioensing & Trading Conditions Abroad, India
A. Background
In determining direct labor costs, Commerce, instead of using SKF India’s labor costs, used public source data from Investing, Licensing & Trading Conditions Abroad, India (“ILT”), released by the Economist Intelligence Unit in November 1993.
See Preliminary Results,
[Commerce] prefer[s] published surrogate import data to the SKF [India’s] data in valuing the material FOP for the following reasons. First, [Commerce is] able to obtain data specific to the [period of review], which more closely reflect the costs to producers during the [period of review]. Second, the raw material costs from the SKF [India’s] report do not specify the types of steel purchased by SKF [India], The record does not indicate whether SKF purchased bar steel (the type used by the Chinese manufacturers) or more expensive tube steel to produce bearings parts. Third, al *1307 though [Commerce] agree[s] with [Timken’s] point that SKF [India’s] is a producer of subject merchandise, the report also identifies other products it manufactures.
Final Results, 62 Fed.Reg. at 6193.
B. Contentions of the Parties
Commerce asserts that it does not focus upon a particular surrogate producer of subject merchandise if more objective, industry-wide values (such as ILT rates) are available because: (a) the surrogate producer is not the subject of the valuation; (b) Commerce’s goal is to use surrogate values that represent the industry norm of the surrogate country, not company-specific surrogate values; and (c) Commerce prefers to value factors using public information that is most closely concurrent to the specific period of review (“POR”). See Def.’s Mem. at 7, 44.
Peer Bearing supports Commerce, stating that Commerce was not required to use SKF India’s labor costs, and points out that Commerce could use diverse surrogate sources. See Peer Bearing’s Resp. of Feb. 18 at 17.
Timken argues that if the use of SKF India’s unadjusted overhead, SG & A and profit rates were reasonable, then Commerce should be required to use SKF India’s labor costs. See Timken Mem. at 36.
C. Analysis
The applicable provisions state that
the valuation of the factors of production shall be based on the best available information regarding the values of such factors in a market economy country or countries ...
... unitiz[ing], to the extent possible, the prices or costs of factors of production in one or more market economy countries that are — (A) at a level of economic development comparable to that of the nonmarket economy country, and (B) significant producers of comparable merchandise.
19 U.S.C. §§ 1677b(c)(l) and (4).
Although the provisions specifically refer to “costs ... in one or more market economy
countries
” rather than private
entities, id.
(emphasis supplied), the reasonableness of using a particular’ value must be determined on a case-by-case basis.
See, e.g., Ceramica Regiomontana, S.A. v. United States,
In the case at bar, SKF India’s labor expenses were an element included in the denominator of Commerce’s calculation of the ratio for overhead, SG & A and profits. Commerce, therefore, effectively made an election for the particular factor of production and supported such election with a sufficient record and reasoning. 12
This Court holds that, within parameters of each administrative determination, Commerce is bound to each election Commerce makes. While Commerce is entitled to use different surrogate
sources
in making an election,
see Timken,
In sum, Commerce’s decision to use ILT data rather than SKF India’s data in determining labor costs was unreasonable in view of Commerce’s use of SKF India’s data for the calculation of the overhead, SG & A and profit rates. Therefore, this issue is remanded to Commerce to redetermine direct labor costs on the basis of SKF India’s data on labor (supplemented by facts otherwise available only to the extent necessitated by the insufficiency, if any, of SKF India’s data currently on the record).
VII. Commerce’s Adjustment
A. Background
Section 1677a(e) of Title 19 provides for deduction from ESP of “expenses generally incurred by or for the account of the exporter in the United States in selling identical or substantially identical merchandise ....” 19 U.S.C. § 1677a(e) (1988). When an adjustment is granted to ESP, Commerce’s regulation, 19 C.F.R. § 353 .56 (1994), permits an ESP offset to FMV up to the amount of indirect selling expenses incurred in the United States.
See Torrington Co. v. United States,
During the review at issue, Timken contended that Commerce should subtract only the portion of SG & A that is attributable to indirect selling expenses. Commerce agreed with Timken and stated that, “in conformity with section 353.56 ..., [Commerce makes the ESP offset to FMV] in an amount not ... exceeding] indirect selling expenses incurred in the United States.”
Final Results,
[t]he SKF [India’s] report notes that the general category of expenses containing the “other expenses” item includes “selling expenses.” However, none of the [specifically] named items (e.g., “power and fuel”) pertain to selling expenses. [Commerce has] concluded that, as suggested by [Timken], the “other expenses” item, minus debentures, represents these “selling expenses.”
Id.
B. Contentions of the Parties
Timken asserts that Commerce’s explanation about the “other expenses” in SKF India’s report “admits” that the ESP offset was not limited to selling expenses but includes such non-selling expenses as power and fuel. See Timken’s Mem. at 39-40. Accordingly, Timken argues that Commerce should either make no ESP offset adjustment to FMV at all or make a reasonable estimate of what portion would be *1309 indirect selling expenses. See id. at 43. Timken contends that because the “ESP offset” process is derived from the language of a regulation rather than a statute, “it would in no way fall short of any statutory mandate for [Commerce] to decline to make the offset, rather than making it on the basis of overly-broad data. Moreover, not making the offset would be consistent with the rule that remedial statutes are to be liberally construed to effectuate their purpose of protecting [United States] industry.” Id. at 42.
Commerce maintains that it “did not admit in the Final Results, 62 Fed.Reg. [at 6203,] that [Commerce] included in the ESP offset non-selling expenses.” Def.’s Mem. at 46. Commerce explains that, after extracting from SKF India’s report individual line items representing non-selling expenses, such as power and fuel, Commerce concluded that the “other expense” category contained, in general, only selling expenses and, in particular, only indirect selling expenses for which the ESP offset adjustment was appropriate. See id. (citing Final Results, 62 Fed.Reg. at 6203, Comment 14).
Peer Bearing supports Commerce’s position and asserts that “Timken misunderstands the breakout of expenses” in the SKF India’s report. Peer Bearing’s Resp. of Feb. 18 at 18.
C. Analysis
The relevant expense category in the SKF India’s report is headed “Manufacturing and Other Expenses Profit & Loss Account” and includes the following items: (a) “Stores and spares consumed”; (b) “Power and fuel”; (c) “Repairs to buildings”; (d) “Repairs to Machinery”; (e) “Insurance”; (f) “Rates and taxes”; (g) “Rent”; (h) “Director’s commission”; (i) “Royalty”; (j) “Other expenses”; and (k) “Profit (less loss) on fixed assets sold, scrapped.” Def.’s Mem., Ex. 8. The item “Manufacturing and other expenses,” in turn, includes the following four designations: (1) “Contribution to provident and other funds ... ”; (2) “Included in stores and spares consumed is the debit in respect of tools”; (3) “Auditors’ remuneration”; and (4) “Debenture issue expenses.” Id., Ex. 9.
While Timken reads the selling expenses figure to include “an undefined array of ‘other expenses’ as well,” Timken Mem. at 40, the Court believes that Timken is either: (1) misreading the evidence; or (2) assailing the very conclusion reached by Commerce rather than Commerce’s mode of reasoning. However, the result reached by Commerce, unlike the logistics of Commerce’s determination, is outside the Court’s standard of review.
See Writing Instrument,
The Court finds Commerce’s reading and application of the evidence reasonable because: (1) none of the other items in the category “Manufacturing and Other Expenses Profit & Loss Account” pertain to selling expenses and, thus, it was reasonable for Commerce to conclude that selling expenses were captured in the “other expenses” item; and (2) the list of “other expenses” includes only one designation not pertaining to selling expenses, namely, “Debenture issue expenses” and, thus, it was reasonable for Commerce to conclude that, “after the deduction of debenture issue expenses, the remaining ‘[o]ther expenses’ contain [the best available list of] selling expenses.” Def.’s Mem. at 47.
Timken’s suggestion that Commerce, in dealing with imperfect evidence, should
*1310
simply decline to make any use of such evidence and refuse the ESP offset adjustment because “remedial statutes are to be liberally construed to effectuate their purpose of protecting [United States] industry,” Timken’s Mem. at 42, is equally unpersuasive. The whole body of the antidumping duty law is largely remedial in nature,
see Badger-Poivhatan, Div. of Figgie Int’l, Inc. v. United States,
VIII. Commerce’s Calculation of Marine Insurance
In its final determination, Commerce calculated marine insurance using a publicly available rate for sulphur dyes and multiplying this rate by the packed weight of the merchandise at issue, specifically, bearings.
See Final Results,
62 Fed.Reg. at 6204. As this Court pointed out in
Timken,
Insurers agreeing to pay the value of merchandise lost or destroyed in transit base their premium rates on what it would cost to replace the merchandise or compensate the losses rather than upon the weight of the merchandise being shipped.
See Peer Bearing,
IX. Commerce’s Use of Shanghai General’s Market Economy Import Data
A. Background
During the review period, Shanghai General imported a significant part of its steel input from market economy countries, purchasing such steel directly from a market economy supplier and paying with market economy currency. See Final Results, 62 Fed.Reg. at 6198-99. In view of the significant portion of steel input purchased under market economy conditions, Commerce used Shanghai General’s data concerning such imports, rather than surrogate data, to value Shanghai General’s raw materials FOP. See id.
B. Contentions of the Parties
Timken contends that Shanghai General’s margin in this review was erroneously calculated. Timken argues that since a portion of the FOP valued was obtained from domestic NME sources, Commerce should have averaged the prices Shanghai General actually paid in free market transactions with surrogate values used in substitute for the domestic NME sources. See Timken’s Mem. at 48-52. Timken *1311 urges that Commerce revert to the methodology applied in the Preliminary Results by valuing: (1) Shanghai General’s imports at their actual purchase price; and (2) steel purchased from the PRC at the assigned surrogate rate. See 60 Fed.Reg. at 49,574.
Commerce maintains that Commerce’s actions were in accordance with law, as interpreted and applied in
Lasko Metal Prods., Inc. v. United States,
C. Analysis
The applicable statute provides that, when dealing with imports from an NME country such as the PRC, Commerce shall determine the FMV of the subject merchandise based on FOPs utilized in producing the merchandise.
See
19 U.S.C. § 1677b(c)(1). The statute further provides that Commerce shall value the reported FOPs based on the BIA regarding the values of FOPs in an appropriate market economy.
See id.; see also Union Camp Corp. v. United States,
Commerce’s “task in [an NME] investigation is to calculate what [the] costs or prices would be [in the NME] if such prices or costs were determined by market forces.”
Tianjin,
In applying the FOP methodology to an NME, if Commerce finds that such actual costs represent the BIA, Commerce has the discretion to take a combined approach and to consider actual costs paid by the NME producer for each FOP.
See Lasko Metal Prods.,
“Where an input was sourced from a market economy and paid for in market *1312 economy currency, [Commerce] use[s] the actual price paid for the input to calculate [FMV] in accordance with [Commerce’s] practice.” Final Determination of Sales at Less Than Fair Value: Certain Cut-to-Length Carbon Steel Plate From the People’s Republic of China, 62 Fed.Reg. 61964, 61966 (Nov. 20, 1997) (citing Lasko Metal Prods., 43[] F.3d at 144[6], and outlining Commerce’s practice at the time of the review at issue); see Final Determination of Sales at Less Than Fair Value: Coumarin From the People’s Republic of China, 59 Fed.Reg. 66,895, 66,897 (Dec. 28, 1994); accord Preliminary Results of Antidumping Duty Administrative Review of Porcelain-on-Steel Cooking Ware From the People’s Republic of China, 63 Fed. Reg. 1434, 1436 (Jan. 9, 1998); Final Results of Antidumping Duty Administrative Review of Industrial Nitrocellulose From the People’s Republic of China, 62 Fed.Reg. 65,667, 65,670 (Dec. 15, 1997); Notice of Final Determination of Sales at Less Than Fair Value: Brake Drums and Brake Rotors From the People’s Republic of China, 62 Fed.Reg. 9160, 9163 (Feb. 28, 1997); Notice of Final Determination of Sales at Less Than Fair Value: Bicycles From the People’s Republic of China, 61 Fed.Reg. 19,026, 19,029 (April 30, 1996).
In the case at bar, although a part of the FOP was purchased domestically in the NME, Commerce utilized actual prices paid in market economy currencies to market economy suppliers to value the entire FOP. Commerce reasons that,
[b]ecause the statute does not explicitly address the situation in which an NME producer imports some inputs from market economies ..., [Commerce] has determined that if an NME producer reports prices that are based on inputs from market-economy suppliers, it is appropriate to use those prices instead of a surrogate value, if the amounts purchased are meaningful, i.e., they are not insignificant. [Commerce] has applied this practice consistently in recent years 14
Final Results of Antidumping Duty Administrative Review of Certain Helical *1313 Spring Lock Washers From the People’s Republic of China, 62 Fed.Reg. 61,794, 61,796 (Nov. 19,1997).
Thus, Commerce, if the proportion of the market economy purchases are “meaningful” or “significant,” values the entire FOP using the price paid in the market economy. The record supports Commerce’s conclusion that Shanghai General’s market purchases were “meaningful” and “significant.”
See Final Results
Similarly, the statute does not require Commerce to resort to a weighted average methodology when valuing FOPs where: (1) only a portion of the FOP to be valued is sourced by the NME producer domestically; and (2) another portion is purchased by the NME producer in an arm’s-length transaction from market economy sources and paid for in market economy currency.
See Nation Ford Chem.,
While the Court agrees with Timken’s contention that there could indeed be better information, such as statistics from India, Indonesia or the United States, upon which Commerce could have based its determination, the issue is whether Commerce reasonably exercised its discretion in choosing actual prices paid in lieu of a weighted average of actual prices paid and surrogate prices. The Court’s “duty is not to weigh the wisdom of, or to resolve any struggle between, competing views of the public interest, but rather to respect legitimate policy choices made by the agency in interpreting and applying the statute.”
Suramerica de Aleaciones Laminadas, C.A. v. United States,
Next, the antidumping law provides that Commerce may revoke antidumping duty orders under appropriate circumstances.
See
19 U.S.C. § 1675(c) (1988). “[T]he statute le[aves] much to Commerce’s discretion regarding the revocation of orders.”
Remira Fibres Oy v. United States,
*1314
In the case at bar, Shanghai General appropriately requested partial revocation pursuant to 19 C.F.R § 353.25(b), and Commerce, after examining evidence on the record, found each of the three requirements of the regulation satisfied.
See Final Results,
62 Fed.Reg. at 6213-14. Considering that there is a satisfactory record compiled by Commerce, it is not the position of the Court to question anything but the reasonableness of Commerce’s argument.
See Christensen,
Based on the foregoing, the Court concludes that Commerce acted reasonably in: (1) refusing to resort to a weighted average methodology; (2) utilizing actual prices paid in market economy currencies to market economy suppliers to value the entire FOP; and (3) granting Shanghai General partial revocation of the applicable antidumping duty order.
CONCLUSION
The case is remanded to Commerce to: (1) correct the clerical error resulting from the application of BIA to certain models for which FOPs were available; (2) redetermine direct labor costs on the basis of SKF India’s data on labor (supplemented by facts otherwise available only to the extent necessitated by the insufficiency, if any, of SKF India’s data currently on the record); and (3) determine marine insurance in a manner related to the value and the risk of transporting tapered roller bearings. Commerce’s final determination is affirmed in all other respects.
Notes
. Since the administrative review at issue was initiated before January 1, 1995, the applicable law is the antidumping statute as it existed prior to the amendments made by the Uruguay Round Agreements Act, Pub.L. No. 103-465, 108 Stat. 4809 (1994).
See Torrington Co. v. United States,
. "For total BIA, the margins used in determining the overall rate are derived from sources other than the data submitted by the respondent in the final investigation."
National Steel,
. Furthermore, the fact that a respondent cooperated during the review period does not, by itself, require Commerce to select a non-adverse or neutral BIA rate.
See Allied-Signal Aerospace Co. v. United States,
. In this submission, East Sea Bearing argued that its exports should be liquidated at the entered value because it was not related to any of the other parties in the review. East Sea Bearing then submitted a case brief on November 6, 1995, claiming that: (1) East Sea Bearing should have been treated like Xiangfan International Trade Corporation, a voluntary respondent determined to be entitled to a separate rate; and (2) that East Sea Bearing’s entries should have been liquidated at the entered rate. See Peer Bearing's Mem. at 4, 10-11; Peer Bearing’s Reply at 11-13.
. While Timken's argument may have some merit as far as the practical outcome of the issue is concerned, the Court disagrees with Timken’s bold assertion that an issue that may constitute a legal wrong necessarily becomes moot merely as a result of a later unrelated action that incidentally, and possibly temporarily, corrects the alleged wrong.
See generally, Weinstein v. Bradford,
.Peer Bearing points out that: (1) East Sea Bearing's very first submission was filed on March 30, 1995; and (2) East Sea Bearing cannot be subject to a set deadline because of East Sea Bearing's voluntary status.
See
Peer Bearing’s Reply at 12. Additionally, Peer Bearing asserts that "Commerce orally indicated ... that parties could file a voluntary response to the ... questionnaire”
any
time before the
Preliminary Results
were issued.
Id.
The arguments leave this Court unconvinced. First, a January deadline renders a submission filed in March as defective as that filed in September. Second, the Court fails to fancy an operable review scheme where any party is allowed to provide an agency with information at the party’s leisure and yet can expect the agency to review the information timely and issue a binding determination. Finally, a mere allegation of one party about oral assurances made by an agency creates no obligation for the agency to follow a particular mode of action, it serves even less as a basis for a legal remedy or a court review.
Compare United States v. Mead
Corp., - U.S. -,
. Timken notes that Commerce failed initially to place evidence on the record of import statistics for Indonesia, the United States, or the European Union, although Timken recognizes that these documents were publicly available. See Timken Mem. at 9 n. 2. On February 12, 1998, Commerce supplemented the record to include these documents but because: (1) Commerce is currently unable to present the documents about the European Union data to the Court; and (2) Commerce waives its reliance on that data, see Def.'s Mem. at 29 n. 15, the Court shall not consider the European Union data as evidence of the propriety of Commerce's determination.
. The Court searched long and hard through the briefs and the exhibits provided by the parties for evidence verifying that Indonesia was indeed named during the review as one of the alternative surrogate choices, all to no avail. The Court, however, presumes that Commerce did name Indonesia as an alternative choice because: (1) no party contests such presumption; (2) all parties seem to operate under such presumption; and (3) 19 U.S.C. § 1677b(c)(4) allows Commerce to name a number of alternative surrogates.
. The Court assumes Peer Bearing intended to cite Coumarin, 59 Fed.Reg. at 39,730, and Final Results and Rescission in Part of Anti-dumping Duty Administrative Review of Tampered Roller Bearings and Parts Thereof, Finished or Unfinished, From the Republic of Romania, 61 Fed.Reg. 51,427 (Oct. 2, 1996). The "consistent practice” argument fostered by Peer Bearing leaves this Court unconvinced. While an agency practice is a consideration with regard to the issue of agency execution of its responsibilities, a wrongful agency practice cannot be justified simply on the grounds that such practice is "continuous.”
. Timken argues that Commerce could have exactly calculated the customs duties and import charges incurred by SKF India merely because the record shows the total material cost, the percent imported, and the cost of insurance and freight of SKF India’s imports. See Timken Mem. at 33-34. It does not follow from this list, however, that Commerce knows how much of these import costs are attributable to import duties.
. Indeed, Commerce maintains that Commerce's methodology allowed Commerce to derive an internally consistent ratio. See Def.'s Mem. at 40-41; see also Final Results, 62 Fed.Reg. at 6193.
. In the case at bar, such requirement would create an outcome contrary to the very gist of 19 C.F.R. § 353.56, forcing Commerce to refuse certain respondents the ESP offsets while granting the ESP deductions to the corresponding United States prices.
. Commerce’s practice has been codified in Final Rule on Antidumping Duties; Countervailing Duties ("Final Rule"), 62 Fed.Reg. 27,296 (May 19, 1997). The Final Rule provides that:
[Commerce] normally will use publicly available information to value factors. However, where a factor is purchased from a market economy supplier and paid for in a market economy currency, [Commerce] normally will use the price paid to the market economy supplier. In those instances where a portion of the factor is purchased from a market economy supplier and the remainder from a nonmarket economy supplier, [Commerce] normally will value the factor using the price paid to the market economy supplier.
Calculation of normal value of merchandise from nonmarket economy countries,
Although the Final Rule was issued three months after the Final Results at issue, Commerce applied the aforesaid methodology pri- or to the release of the Final Rule. See e.g., Notice of Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination: Collated Roofing Nails From the People’s Republic of China, 62 Fed. Reg. 25,899, 25,902 (May 12, 1997) ("For those inputs ... that were sourced (either partially or totally) from a market economy and paid for in market economy currency, [Commerce] use[s] the actual price paid for the input to calculate the factors-based NV in accordance with our practice.”) Moreover, the Final Rule differs insignificantly from Notice of proposed rulemaking and request for Public Comments on Antidumping Duties; Countervailing Duties ("Proposed Rule ”), 61 Fed.Reg. 7308, Calculation of normal value if sales are made at less than cost of production, 61 Fed.Reg. 7383, 7384, § 351.406(c)(1) (Feb. 27, 1996), published almost a year before the issuance of the Final Results at issue. In promulgating the Proposed Rule and Final Rule, Commerce explained that one of the *1313 objectives of the issuance of these Rules was to articulate Commerce's ongoing practice. See Final Rule, 62 Fed.Reg. at 27,413; Proposed Rule, 61 Fed.Reg. at 7384.
