652 F.2d 333 | 3rd Cir. | 1981
210 U.S.P.Q. 784
NORTHERN ENGINEERING AND PLASTICS CORP., Appellant,
v.
Roger EDDY d/b/a Marshall Manufacturing Co., and Pacific Cap
Corporation, Appellees.
No. 80-2218.
United States Court of Appeals,
Third Circuit.
Argued Feb. 24, 1981.
Decided June 25, 1981.
As Amended July 16 and Aug. 4, 1981.
Rehearing and Rehearing In Banc Denied Aug. 4, 1981.
Walter J. Blenko, Jr. (argued), Buell, Blenko, Ziesenheim & Beck, Pittsburgh, Pa., for appellant.
Thomas C. Wettach (argued), Reed, Smith, Shaw & McClay, Pittsburgh, Pa., for appellees.
Before ADAMS, ROSENN and HUNTER, Circuit Judges.
OPINION OF THE COURT
ROSENN, Circuit Judge.
This appeal presents the question whether a tamperproof plastic milk-bottle closure, Crisci U.S. Patent No. 3,504,818 (1970), is obvious in light of prior art. The patent was assigned to Northern Engineering and Plastics Corporation (NEPCO). Roger Eddy was employed by NEPCO in 1966-67 and contributed to development of the closure. In 1976, Eddy, having terminated his employment with NEPCO some years before, started manufacturing Crisci-type closures without a patent license. In October 1978, NEPCO sued Eddy for infringement. Eddy defended and counterclaimed on a number of grounds. After a trial, the district court held the Crisci patent invalid on the ground that its subject matter was obvious under 35 U.S.C. § 103 (1976). NEPCO appealed.1 We affirm.
I.
Since at least 1958 those who design plastic bottle closures have been aware of the tamperproofing function that can be served by bottles with ratchet-toothed necks and caps flimsily connected to ratchet-toothed rings.2 The two sets of ratchet toothing, one set on the bottle neck and the other on an annular ring, will engage only when the cap is unscrewed, thus exerting a force on the ring sufficient to break the "frangible" (i. e., breakable) interconnecting "elements" between ring and cap. However, the tamperproof feature is useless if the ring breaks off of the cap during screw-on, because the only function of the connection between cap and ring is to provide assurance to the consumer that the milk bottle has not been opened since it left the bottler.3
The closure at issue here, like others that have been developed, cannot be screwed off without breaking the frangible elements between the cap and the ring. As is apparent from examination of the patents listed in note 2, supra, the feature of the closure that requires breakage of the connection in order to un screw the cap was well-developed prior to the invention embodied in Crisci. The advance embodied in Crisci, however, is in the method by which it allowed the cap simply to be screwed onto the bottle without breaking the connection.
The force exerted by the engaging of the ratchet teeth only operates when the cap is being unscrewed. However, the ratchet teeth also create a force that tends to cause breakage of the frangible elements when the cap is being screwed onto the bottle. This force that operates during screw-on can be analyzed into two components. On one hand, the ring is subject to expansionary pressure during screw-on. The ratchet arrangement only works because the diameter of the ring is sufficiently small so that the teeth on the ring fit into the spaces between the teeth on the bottle when the cap is unscrewed. But when the ring is rotated relative to the bottle during screw-on, these teeth must pass over each other. The gliding of one set of teeth over the other tends to cause the ring to expand, in the sense of having its diameter enlarged, when the cap is screwed onto the bottle.4 Moreover, because the ring resists expansion, there is an inevitable drag on the ring during screw-on. In other words, while the screwing on of the cap tends to pull the ring around in the same clockwise circular motion as the cap, friction, engendered by the squeezing of the tooth-ends on the ring over the tooth ends on the neck of the bottle, tends to impede this clockwise motion of the ring.
The success of any ratchet-toothed closure will depend on the relationship between (a) the strength of the frangible connectors between cap and ring, and (b) the magnitude of the forces of "expansion" and "drag" that are transmitted, during screw-on, to these frangible points or elements. Roughly speaking, the former must exceed the sum of the latter. Other constraints on closure design exist. Obviously, the strength of the connectors must be limited so that the consumer can break them by screwing the cap off of the bottle. Furthermore, expansion and drag must not be reduced beyond the point at which such reduction impairs the ability of the ratchet teeth to effectively engage upon screw-off. Thus, while the strength of the connection between cap and ring must exceed the strength of the combined expansionary and dragging forces exerted on the connection during screw-on, the former is subject to a ceiling and the latter is subject to a floor.
Fischbach (the German patent) attacks this problem by wholly eliminating transmission of drag from the ring to the frangible connectors. This is accomplished by means of an extra rib/cam arrangement.5 None of the other patents really addresses the problem of relieving stress upon the frangible connectors, although Babiol, like Crisci, uses flexibility to relieve stress on the ring and ring "teeth" (in Babiol, the ring "teeth" are referred to as "pawls").
The Crisci patent attacks the problem in a simpler, more elegant manner. Expansion and drag are absorbed by the irregularity of the outward expansion of the ring itself. Flexibility of the ring allows it to expand at certain points along its circumference without exerting a great amount of expansionary pressure at others. The crucial feature is "circumferential spacing" i. e., separation of the necessary expansion points (i. e., the points along the circumference of the ring at which teeth are placed) from those places along the circumference of the ring at which the frangible connectors are attached to the ring. For this reason, it is significant that, as NEPCO points out, the other patents fail to disclose
angular projections (i. e., teeth) on the inside of the ring which are circumferentially spaced from the frangible elements, and ... outward flexing of the annular ring between the frangible elements to permit slipover engagement of the angular projections with ratchet sections on the bottle neck.
Reply Br. at 7 (emphasis added).
It appears that, in effect, Crisci involves nothing more than the prior known designs (a) absent alternate ring teeth and connecting points between ring and cap, and (b) incorporating a slight rotation of the remaining ring-teeth relative to the connecting points. Also, to enable these changes to improve the screw-on performance of the cap, the ring is made (perhaps) more flexible.6 The question is whether this alteration constituted a patentable invention; more particularly, whether it "would have been obvious ... to a person having ordinary skill in the art to which said subject matter pertains." 35 U.S.C. § 103.
II.
Although the question of obviousness is ultimately a legal one, Sakraida v. Ag Pro, Inc., 425 U.S. 273, 280, 96 S.Ct. 1532, 1536, 47 L.Ed.2d 784 (1976), its resolution must be predicated on the factual inquiries set forth in Graham v. John Deere Co., 383 U.S. 1, 86 S.Ct. 684, 15 L.Ed.2d 545 (1966). A court must, in a case such as this, determine (1) the scope and content of the prior art; (2) the differences between the prior art and the claims at issue; and (3) the level of ordinary skill in the pertinent art. Id. at 17, 86 S.Ct. at 693.
We look first to the prior art. As did the district court, we take the prior art to consist in those patents listed in note 2 supra. Those patents (with the exception of Fischbach) make no provision for reducing, during screw-on, the stress on the frangible elements connecting the cap and the ring. Fischbach does incorporate means for overcoming this problem, although it does so by means of an additional structure that increases the production cost of the device.7 Crisci, however, attacks the problem in a conceptually opposite manner, simply reducing the number of elements in the cap and ring.8
Having determined the prior art and its significance to the Crisci innovation, we inquire into the ordinary level of skill in the pertinent art. The district court correctly identified the pertinent art as the design and manufacture of closures but it did not ascertain the level of ordinary skill in that art at the time Crisci applied for his patent. On this record, however, we believe that we are in as good a position as the district court to determine that level and we see no need to remand for this purpose. The number of patents issued for bottle closures over the years between 1958 and 1968, in addition to the seminal patent issued in 1942 to Sharp, would seem to indicate an intense interest and sophisticated level of skill in the art. The various types of closures then currently available and the materials used to manufacture them were, as found by the district court, familiar to those possessing ordinary skill in the art. Elimination of unwanted breakage without utilizing the costly production step (needed in Fischbach) of separating the ribs and cams was a typical problem for which closure manufacturers were apt to redesign their products. Cheevely, an engineer with considerable experience in the injection mold industry and in the design of tools for caps, closures, and special projects in the plastics industry, testified that he too would have looked for ways to eliminate the ribs and cams that made the Fischbach patent expensive to produce and that it would have been natural "to have gone the direction Mr. Eddy did to produce a cap" less expensively which functioned effectively.
III.
We proceed from the factual questions to the legal question whether, to those skilled in the art of tamperproof closures, the jump from the prior art to Crisci entailed the work of the "skillful mechanic" or that of the "inventor." Hotchkiss v. Greenwood, 52 U.S. (11 How.) 248, 267, 13 L.Ed. 683 (1851). As the Supreme Court has recognized, the difficulties in deciding this question "are comparable to those encountered daily by the courts in such frames of reference as negligence and scienter." Graham v. John Deere Co., 383 U.S. at 18, 86 S.Ct. at 694. "(W)hether the variation relied upon in any particular case is anything more than ordinary mechanical skill is a question which cannot be answered by applying the test of any general definition." McClain v. Ortmayer, 141 U.S. 419, 427, 12 S.Ct. 76, 78, 35 L.Ed. 800 (1891), quoted in Great Atlantic & Pacific Tea Co. v. Supermarket Equipment Corp., 340 U.S. 147, 151 n.6, 71 S.Ct. 127, 129, 130 n.6, 95 L.Ed. 162 (1950). Although the answer to the question must be sought by probing the hypothetical frame of mind of one whose aptitude for spotting improvements to the products of his art are presumably greater than ours, we must also guard against that hindsight which renders every pure concept natural, intuitive, and "obvious" just because it is fundamentally simple.9
Perhaps because of these difficulties, compounded by the fact that the judiciary "is most ill-fitted to discharge the technological duties cast upon it by patent legislation,"10 the law embodies a requirement that courts defer, in at least two ways, to determinations of validity by the Patent Office.
It is a fundamental canon governing judicial consideration in this field that a presumption of validity attaches to patents issued by the United States Patent Office. Not only has a unanimous Supreme Court noted that "patentees are heavily favored as a class of litigants by the patent statute," but this court has stated on several occasions that the burden of proving patent invalidity is a heavy one. Moreover, such invalidity must be demonstrated by "clear and convincing proof."
Universal Athletic Sales Co. v. American Gym, Recreational & Athletic Equipment Corp., 546 F.2d 530, 540 (3d Cir. 1976), cert. denied, 430 U.S. 984, 97 S.Ct. 1681, 52 L.Ed.2d 378 (1977) (footnotes omitted); 35 U.S.C. § 282 (1976).
The presumption of validity that attaches to a patent issued by the U.S. Patent Office, however, is "weakened" when the party asserting obviousness comes forward with "significant prior art not considered by the Patent Office." U.S. Expansion Bolt Co. v. Jordan Industries, Inc., 488 F.2d 566, 569 (3d Cir. 1973); accord, Aluminum Co. of America v. Amerola Products Corp., 552 F.2d 1020, 1024 & n.7 (3d Cir. 1977); Escoa Fintube Corp. v. Tranter, Inc., 631 F.2d 682, 691 (10th Cir. 1980). Eddy claims that he has done so, because the prior art presented to the Patent Office, comprised of the claims to which Bardell and Homma were drawn, was characterized at the time by Crisci's attorney as including only rings secured to the cap by "longitudinally extending frangible portions." Crisci's frangible elements, on the other hand, are "radially extending," and so, says Eddy, are the frangible elements on Fischbach and Fapex. NEPCO, on the other hand, argues that Homma and Bardell effectively incorporated all of the significant prior art disclosed in the patents considered by the district court.
The district court did not purport to rely on any supposed deficiency in the showing made before the Patent Office.11 Moreover, the question whether the frangible portions of the prior art closures extended radially or longitudinally is not, in itself, crucial to the relevance of the patents claimed in the district court below to constitute prior art. Rather, the relevant issue is whether the prior art before the Patent Office disclosed ways of ensuring that the caps could be screwed on to bottles without breaking off the rings.12 Whether or not the frangible elements were radial or longitudinal was not, in the context of this case, relevant to that question. It appears that insofar as Bardell and Homma dealt with the ability of closures to afford evidence of tampering, they were, in effect, indistinguishable from Crisci or the prior art raised in the district court.13
Thus we are not wholly persuaded that this is a case in which the presumption of patent validity has been "weakened." However, we need not resolve this presumption issue because we believe that Eddy has sustained the rigorous burden of proving that the Patent Office erred in granting the Crisci patent, even assuming that the references submitted to the Patent Office constituted, as Crisci argues, all of the significant prior art. We recognize that inventions perform an exceedingly important and useful function, especially in our complex, industrial society; but to justify a patent monopoly, an improvement must demonstrate an inventive genius which makes a distinctive contribution to "the Progress of ... useful Arts."14 In this case the change in the mechanical construction by reducing the thickness of the annular ring (thereby increasing its resiliency), reducing the number of angular projections, and spacing the projections apart from the frangible elements on the inner surface of the ring did not make the admittedly improved device patentable.15 It was not the creation of an "inventive" faculty, even though it realized better results, but rather displayed the sort of useful intelligence that any "skilled mechanic" would have been called upon to exert daily in the course of exercising his skill. Unlike the invention in Eibel Process Co. v. Minnesota & Ontario Paper Co., 261 U.S. 45, 43 S.Ct. 322, 67 L.Ed. 523 (1923), Mr. Crisci's rearrangement of the "old" elements produced no unanticipated result; Crisci did not discover the source of a previously impenetrable difficulty in tamperproof cap design. Cf. id. at 67-68, 43 S.Ct. at 329-30. Instead, Crisci deduced, from the rather simple and totally apparent geometrical properties of his product, a logical means for minimizing the otherwise necessary stress on the frangible elements of his closures during screw-on.16
Moreover, we see no evidence that closure designers were struggling unsuccessfully to achieve the results that Crisci achieved. In fact, it appears that many successful tamperproof plastic bottle closures have been designed and manufactured without the "circumferential spacing" that forms the heart of Crisci's improvement. We draw from this the conclusion that in all likelihood, the only reason that the Crisci design had not been "invented" prior to Mr. Crisci's effort was not so much to be found in the elusiveness of the concept he grasped, but rather in the relative triviality (in practical terms) of his refinement. Thus, we agree with the district court that based on the level of the prior art, that improvement to the bottle closure described in the Crisci patent "would have been obvious to a person having ordinary skill in the art of manufacturing closures."
IV.
The judgment of the district court will be affirmed. Each side to bear its own costs.
The district court's determination of obviousness disposed of NEPCO's infringement claim, thus rendering the order appealable under 28 U.S.C. § 1291 (1976)
The district court also made explicit findings against Eddy on his claim that NEPCO's use of Crisci constituted a violation of sections 1 and 2 of the Sherman Act, 15 U.S.C. §§ 1, 2 (1976). Eddy's other claims were not addressed in the district court opinion. In resisting NEPCO's appeal, Eddy again raises all of the defenses raised at trial. In particular, Eddy argues not only that Crisci is obvious, but that it is also (a) invalid for lack of novelty (35 U.S.C. § 102(a)), (b) invalid for failure to identify Eddy as co-inventor (35 U.S.C. §§ 102(f) and 116), (c) invalid for failure to disclose enough information to enable others to make and use it (35 U.S.C. § 112), and (d) unenforceable due to misuse and inequitable conduct on the part of NEPCO. In view of the disposition we reach under 35 U.S.C. § 103, we need not discuss these additional defenses.
See Kundert U.S. Patent No. 2,864,521 (1958). See also Bardell U.S. Patent No. 3,415,403 (1968); Homma U.S. Patent No. 3,407,976 (1968); Babiol U.S. Patent No. 3,249,247 (1966); Fischbach Kunststoff-Spritzgusswerk German Patent No. 1,154,369 (1964); Fapex Trust Reg. British Patent No. 809,398 (1959). Cf. Sharp U.S. Patent No. 2,280,724 (1942) (achieving the tamperproof function without ratchet-toothing)
Fischbach and Babiol both advert to this problem in their specifications, and both base the novelty and usefulness of their claims upon their means for overcoming the problem
Expansionary pressure need not be uniform over the entire circumference of the ring. In fact, Babiol claims a ring that expands over the "teeth" (or "cams") on the bottle only to contract in the gaps between the teeth, thus allowing the total circumference of the ring to remain constant. The ring in the Crisci patent also expands over the teeth in the screwing on process and maintains a slightly reduced diameter in the spaces between the teeth as they glide over each other
The ribs are part of the cap and the cams are part of the ring. During screw-on the ribs push the cams, thereby rotating the ring together with the cap. During screw-off, however, the ribs are free to move independently of the cams, thus placing all of the stress upon the frangible elements. The frangible elements in Fischbach, and in other similar devices, may be spared the brunt of expansionary pressure by placement at 45-degree angles to radial
As the district court put it, the Crisci patent differed from the prior art reviewed by him "only in the placement, numerosity and thickness of the thin, spaced elements described by Crisci as 'frangible elements' and the protrusions on the cap and bottle, described by Crisci as angular projections and ratchet sections."
In the process of molding the plastic closure, the ribs and cams are molded as one piece. They must be cut apart in a separate production step in order for the device to be useful
The district court may have treated the prior art question in this case without reference to the problems specifically addressed by Crisci, Fischbach, and Babiol. For instance, it found that the prior art employed ratchet teeth "so angled that the cap can be screwed on without disturbing" the frangible elements, even though each of the specifications in the three last-named patents discussed the unreliability of prior designs in allowing trouble-free screw-on
Cf. Tokyo Shibaura Elec. Co. v. Zenith Radio Corp., 548 F.2d 88, 94 (3d Cir. 1977) ("any invention, when viewed with the assistance of hindsight, appears obvious in the light of the prior art"); Globe Linings, Inc. v. City of Corvallis, 555 F.2d 727, 731 (9th Cir.), cert. denied, 434 U.S. 985, 98 S.Ct. 611, 54 L.Ed.2d 479 (1977) ("An inventor will not be denied a patent simply because his invention embodies a solution which seems simple and obvious with the benefit of hindsight."); Aronson v. Toy Devices, Inc., 1 F.2d 91, 92 (3d Cir. 1924) ("Mere simplification of a substantial character, disposing of parts which have long been in use, may amount to invention. 'To obtain simplicity is the highest trait of genius.' ")
Graham v. John Deere Co., 383 U.S. at 36, 86 S.Ct. at 703 (quoting Marconi Wireless Co. v. United States, 320 U.S. 1, 60, 63 S.Ct. 1393, 1420, 87 L.Ed. 1731 (1943) (Frankfurter, J., dissenting in part))
Cf. Allegheny Drop Forge Co. v. Portec Inc., 541 F.2d 383 (3d Cir. 1976) (per curiam) (affirming invalidation of a patent by the district court where the latter found that the Patent Office had not considered a previously issued patent which was "identical" to the patent-in-suit)
The Patent Office apparently did find troublesome similarities between Crisci and the prior art; it initially rejected Crisci's claims 1-3 as being unpatentable over the patents of either Bardell or Homma. Crisci, however, amended claim 1 by describing the annular ring carried by the frangible elements as "thin flexible" and "flexing outwardly between said frangible elements as said angular projections and ratchet section engage" and the angular projections on the inner surface of the ring as "radially inwardly extending" and "circumferentially spaced from said frangible elements." Crisci's counsel also represented to the examiner that if the annular rings were not thin and flexible, it would not work. Approval of the claims followed
It is true that Fischbach and Babiol, two earlier patents not before the Patent Office in connection with Crisci's application, add a dimension to the prior art not disclosed by Bardell and Homma viz., means for relieving stress upon the teeth and the frangible elements during screw-on. Fischbach also included an annular flexible ring having a plurality of circumferentially spaced radially inwardly extending angular projections on the inner surface of the ring. This ring is also carried on extended elements or crosspieces circumferentially spaced around the cap. Fischbach, however, adds a new structure to absorb the stress; it meets the breakage of the frangible elements problem in screwing the cap on "by increasing the strength of the cap and providing additional structures which transmit the forces." Crisci attacks the problem by simply reducing the number of elements in the cap and the rings
Babiol provides a means for relieving stress upon the "pawls," but the result is a frangible element that must flex over the "cams" (Babiol refers to the teeth on the bottle neck as "cams") just as the frangible elements in each of the patents (other than Crisci) must flex over the teeth attached to the bottle. The Fischbach and Babiol specifications did disclose the utility of improvements that were missing in the other prior art. They did not for that reason, however, necessarily increase the obviousness of Crisci's improvement. The utility of the Crisci improvements would have been apparent from the day-to-day experience of manufacturing plastic milk bottles.
14 U.S.Const. Art. I, § 8, cl. 8. See generally Graham v. John Deere Co., 383 U.S. at 5-6, 86 S.Ct. at 687-88. Cf. Great Atl. & Pac. Tea Co. v. Supermarket Equip. Corp., 340 U.S. at 155-56, 71 S.Ct. at 131-32 (Douglas, J., concurring) (distinguishing inventions "of such quality and distinction that masters of the scientific field in which (they fall) will recognize (them) as an advance" and "gadgets that obviously have no place in the constitutional scheme of advancing scientific knowledge").
It is not enough that an article is new and useful. See, e. g., Cuno Eng'r Corp. v. Automatic Devices Corp., 314 U.S. 84, 90, 62 S.Ct. 37, 40, 86 L.Ed. 58 (1941)
"(A) change only in form, proportions, or degree ... is not such invention as will sustain a patent." Pullman Inc. v. ACF Indus., Inc., 393 F.2d 83, 89 (2d Cir. 1968) (quoting Smith v. Nichols, 88 U.S. 112, 119, 21 Wall 112, 119, 22 L.Ed. 566 (1874)). Cf. American Infra-Red Radiant Co. v. Lambert Indus., Inc., 360 F.2d 977, 987 (8th Cir.), cert. denied, 385 U.S. 920, 87 S.Ct. 233, 17 L.Ed.2d 144 (1966) (an invention will not be "decided on the narrow issue of degree" and "the mere changing of form, proportions, or size will not alone constitute 'invention.' ")