73 F. 469 | 2d Cir. | 1896
The bill of complaint charged infringement of three patents, all granted to E. D. Rockwell, assignor to complainant, as follows: No. 456,062, July 14, 1891; No. 471,-982, March 29, 1892; No. 471,983, March 29, 1892; the first two relating to improvements in bicycle bells; the third intended for and •adapted to stationary bells used on doors. The circuit court sustained the validity of all three patents, but held that defendant had not infringed either No. 456,062 or No. 471,983; and from this decision complainant has not appealed. The only questions; therefore, coming up for review here, are as to the validity of No. 471,982, and whether defendant’s bicycle bell infringes.
The specification states that the object of the invention is to—
“Produce a bicycle bell that Is compact, simple, strong, durable, and reliable, and by which a sound resembling an electric bell, but of increased -purity of tone, may be produced.”
The details of complainant’s device, and its advantages, are fully set forth in the brief of his counsel, as follows:
“It consists of an alarm bell, capable of construction in any size, and light or heavy, according to the taste and needs of the user. It is attractive in appearance, and capable of attachment to the handle-bar in such a way that only the thumb of the rider is needed to sound the alarm, and the grip of the hand upon the bar is not materially interfered with. Very few parts are necessary for its construction, and these are of such a character, and so combined, as to form a structure very strong, not easily thrown out of order, and capable of safely experiencing any ordinary accident to which it is likely to be subjected! It is inexpensive to manufacture. * * * The bell consists of a base plate which is dish-shaped, and contains and protects the intermediate mechanism, in a compact form, between the base plate and the gong. The base plate is of such form that means can be and are provided for affixing the bell to the bicycle handle bar. In the form shown a gong is provided, which is joined firmly to the base plate by means of a screw. A lever of convenient form is pivoted to the base plate, one end being a thumb piece projecting beyond the circumference of the bell, and the other carries a segmental gear. This gear engages with a pinion upon a gear wheel, which, in turn, meshes*471 with a pinion upon one .side of the ¡tinker bar, which is loosely pivoted upon a stud. The striker bar carries loosely-pivoted strikers. A tensile spring attached to the lever tends to keep it in one position, and operate' the striker bar in reverse direction to the direct action of the thumb-pressed lever.”
The gong, so says Ihe specification, is—
“Preferably provided on one sitie with a lug against which (lie strikers impinge when the striker bar is revolved, producing a clhar, musical sound. «■ * Hand pressure upon the handle [i. e. the thumb piece] will ojHiiate ¡lie lever, and, through the train of gearing, impart several revolutions to the striker bar. When the handle is released the spring will reiract the lever to its first position, and cause the srrikei bar to revolve in the opposite direction.”
The second claim of the patent, which is the only one which it is claimed defendant infringes, is as follows:
“¡2) The combination, with a base plate, of a revoluble striker bar, spring-actuated in one direction, a lever operatively connected iherewith, and adapted to rotate the striker bar in opposition to the force of the spring, and a gong, substantially as set foi+li.”
The specification sí afea:
“The form of the .striker bar is immaterial; a revoluble head, adapted to carry strikers, being- ¡he essential characteristic.”
The form shown in the patent is lint one patented by the same inventor in Ao. 4.79,602. Of sneli a striker bar the judge who tried the cause in tin* circuit court says;
"Various suggestions are made in support of the claim of novelty in the centrally pivoted swinging arm. Tims, it is said that the arm must extend almost across the inside of ¡.lie gong, and be adapted to swing around the entire diameter. But. the Bennett iwtent [referred to infra] shows the arm swinging around the entire diameter of the gong, and it surely would not require invention to duplicate said arm by extending it in the same way on the opposite side.”
And he found patentable novelty in complainant's ,striker-bar patent solely because of ihe form and arrangement of its strikers. The statement above quoted from the specification precludes muling luto the' second claim of this patent nn\ peculiar form or amingeinenfc of the strikers ¡bemseives.
Conceding that, complainant's bi-cycle bell is compact, simple, durable, reliable, convenient, and attractive, it dot's not necessarily follow that if exhibits patentable novelty. Whether it. is or is not an invention is a question to be determined by a reference to the state of the art prior to Kockwell's application, Septemtber 17, 1891. Of the many bicycle bells introduced In evidence, it will be sufficient to refer to two only. — the “Bran- Bros, bell, of March. 1896.-” and ¡he ‘‘Bevin Bros, bell, of July, 1891."’ These bells, in ihe following-particulars, are practically identical with complainant's. They are alarm bells, capable of construction in any size, and light or heavy, as desired. They are attractive in appearance, and capable of attachment to the handle bar in such a way that only the thumb of the rider is needed to sound the alarm, the grip of the hand on the bar not being interfered with. Each of them has a base plate which is dish-shaped, and contains and protects the intermediate mechanism, in a compact form, between the base plate and gong. Each base plate is of such form that means of attachment can be and are
“Invention consists of the construction and arrangement of the parts of the striking mechanism of call bells, door bells, and other bells, whereby a repeating action is obtained in the bell; that is, the bell is struck, several times in succession when it is operated upon by the hand, or by a lever or other actuating mechanism.”
The inventor first describes a call bell having a swiveled or jointed revolving hammer set in motion by a push rod:
“When the push rod is pressed down by the hand or finger, the pin or stud on it, by working in the helical slot in the hammer tube, gives rotation to the hammer tube, and the swiveled or jointed hammer on the said tube is thereby made to strike three or more times the lugs or projections on the inside of the bell; and, on the push rod making its return or upward motion by the action of its spring, the hammer tube is made to rotate in the opposite direction, and the hammer is again made to strike several times the lugs or projections on the inside of the bell. The repeating action of the bell is thus effected both on the advance or descending motion of the push rod, and on its return or ascending motion.”
It is unnecessary to go into tbe details of structure of tbe Bennett call bell, except to say that its characteristic feature is a revoluble striker arm, with a swiveled bead, wbicb, being rotated in one direction by direct pressure of tbe band, and in tbe opposite direction by a spring, makes several revolutions back and forth when pressure is applied, thus producing a continuous alarm. Having described bis “call bell,” Bennett proceeds:
“Pig. 7 represents in front elevation, and Pig. 8 in side elevation, partly in section, a door, house, or other like bell, to which repeating mechanism, constructed according to my invention, is applied, a is the bell supported on the pillar, b, in the usual way; c, c, are the lugs or projections on the bell for the jointed hammer, d, to strike against. The arm, e, to which the jointed hammer, g [manifestly a misprint for d], is connected, is fixed to the short tube or collar, f, capable of rotating freely on the bell pillar, b. This tube or collar, f, carries a pinion, g, which gears with the teeth of the semicircular wheel*473 or toothed sector, h. By moans of the said toothed wheel or sector, h, gearing with the pinion, g, a rotary motion may be given to the tube or collar, f, and to the jointed hammer, d, carried by it, and the said hammer, d, be made to strike several times in succession the lugs or projections, c, c, on the inside of the bell, a, as described with respect to the call bell. The half toothed wheel or sector, h, is worked by the pulling of the wire attached 1o the arm, i, which wire may either be acted upon by a bell pull, or by the motion of a door. The said arm, i, is jointed to the crank, k, on the axis of the half wheel or sector, h. When several bolls are arranged side by side, each bell may be provided with a pendulum, 1, connected to the crank, k, for indicating which bell has been used. The motions of the several parts of the bell are effected by the coiled spring, m, around the hell pillar, b. One end of the coiled spring, m, is fixed to the rotating hammer arm, e, and the other end to the adjustable collar, n, fitted on a square or angular part of the pillar, b. When the pinion and the collar, f, g, are rotated by the operation of the half wheel or sector, h, the spring, in, is coiled upon the pillar, b; and it is by the uncoiling of the spring, when the bell arm, i, has come to the end of its advance stroke, that the return motions of the jointed hammer, d, e, collar, £, pinion, g, wheel, h, and arm, i, are effected. By changing the position of the collar, n, with respect to the square or angular part of the bell pillar, b, on which it is fixed, the coiled spring, m, may be tightened or coiled more or less on the said pillar, and any required amount of tension given to it. The required power for working the bell may thus be adjusted with great nicety.”
The drawings referred to are as follows;
Of the mechanism of this Bennett patent, it may be observed tbat it is not restricted to call bells, but, in modified form, is, as the inventor points out, applicable for “door bells and other bells * * operated upon by the hand, or by a lever or other actuating mechan
“The great number of patents introduced into this case, all issued since the British patent, show the amount of inventive skill which lias been brought u> bear upon ibis class of Inventions. If (lie changes necessary to adapt this I Bennett ! bell to a bicycle bell were such as would occur to the ordinary mechanic, skilled in the art, it would seem as though it. must have occurred 10 some one during the fourteen years of the life of said patent. A comparison of the bell [of the Rockwell patent] with [others! previouslj manufactured by defendant shows liotv crude and imperfect were the latest devices of the prior art, and furnishes additional evidence in support of the claim of patentable novelty. * * * The mass of evidence ottered by defendant shows that the desired results ¡tare been accomplished, after repeated and futile attempts on the part of others, by a device which, upon defendant’s own showing, is only anticipated l>y (he earliest of all the devices,--the Bennett British patent of 1877 for a door bell.’’
For years prior to 1892 trie demand for bicycles and bicycle bells was steadily increasing. To supply that demand, new improvements were being continually sought after. An alarm bell, which should be compact,simple.strong,durable,reliable, a l trad ive, efficient, and easily operated, was a desideral um. One after another, the bellmakers of t his "conntry produced bicycle1 bells, differing in mechanism, some containing’ clockwork, some escapements and trembler hammers, but all, as the evidence shows, having one or other drawback, — a circumstance which continually stimulated mechanics and inventors to further effort !<> supply the want. If, during ail this period, a bell-striking mechanism such ass Bennett’s was being turned oui of ¡he bell manufactories of Connecticut, as the operative part of call bells, door bells, and oilier bells, a court might rind it extremely difficult' to understand why it did nor occur to any mechanic possessed of the ordinary skill of his calling to insert such mechanism in the double-dish shell of a bicycle, but would yet fool constrained by the argument that the reason so common a device was not put to a now use was because1 if required inventive genius to discover its adaptability thereto. This argument, however, is not applicable to the ease at bar. There is no reason to suppose that. Bennett or his bell was ever heard of hr any boll manufaciurer in this country until his patent was unearthed by a search for auficipaling devices. The inability of the mere skillful mechanic to encase the Bennett mechanism in a bicycle bell shell, so as to produce a practicable bicycle alarm, is not to be taken for granted merely because it. was not done, unless (here is at least a reasonable probability that such méchame knew of the Bennett mechanism, in this case the probabilities arc1 all the other way. If Bennett’s mechanism was used in the bollmaking industry here, it ¡nay safely lx» assumed that, in a record as carefully prepared as (his, there would be some evidence of it. And so well adapted is that mechanism to bicycle bells that it is