Pursuant to Fed.R.Civ.P. 56, Plaintiffs and Defendants have filed cross-motions for summary judgment. For the reasons stated herein, Plaintiffs’ Motion [Doc. No. 157] is granted in part, denied in part and Defendants’ Motion [Doc. No. 144] is granted in part, denied in part. Additionally, Defendants’ Motions to Strike [Doc. Nos. 186 and 193] are denied.
I. BACKGROUND:
Plaintiffs New Colt Holding Corporation and Colt’s Manufacturing Company, Inc. brought this action
Defendant AWA asserts five counterclaims against Plaintiffs. Pursuant to the Lanham Act, 15 U.S.C. § 1125(a)(1), Defendant AWA alleges false designation of origin claims as to whether Plaintiffs’ Cowboy revolver is manufactured in the USA and false advertising concerning historical significance (First Counterclaim). Defendant AWA also alleges false designation of
The majority of the relevant facts will be discussed as necessary in the substance of this Ruling, however, some
In 1872, Colt’s Fire Arms began manufacturing the Model 1873 revolver, also known as the Peacemaker, Single Action Army, and/or the Model P. The introduction of the revolver was successful and by the end of the year, the United States Army adopted it as its standard issue. It is the appearance of this revolver, which Plaintiffs argue remains basically unchanged in its present day instantiation, that Plaintiffs claim as their trade dress.
The revolver was continuously manufactured until 1941 when production of the revolver was halted. Plaintiffs claim this was necessary in order to dedicate their production facilities to manufacturing arms for World War II. Defendants contend production stopped because the revolvers were no longer selling well. Nonetheless, after approximately 14 years of non-production, manufacture of the Peacemaker resumed in late 1955. The revolvers produced after 1955 are typically referred to as Second Generation Peacemakers.
Production was again continuous until 1976 when the revolver was retooled once more. Revolvers produced after this retooling are referred to as Third Generation Peacemakers, which are produced to this day. Plaintiffs contend that the differences between the three generations of revolvers are negligible and that the overall appearance and trade dress remain virtually unchanged. Defendants allege there have been significant changes and that the trade dress is not the same. It is agreed, however, that since 1873 virtually all of Plaintiffs’ revolvers have had the name address, either in full or abbreviated, — “Colt’s Patent Firearms Manufacturing Company, Hartford Connecticut USA” — stamped as a rollmark on the barrel of the revolver. Moreover, since 1956 Plaintiffs have been competing with various manufacturers of replicas of the Peacemaker revolver.
Defendant RJG formerly known as American Western Arms was incorporated for the purpose of manufacturing replica Peacemaker revolvers. Its president, Robert Gangi, sought to manufacture the most accurate replicas of First Generation Peacemakers on the market. Mr. Gangi decided to offer two models for sale which were based on the Armi San Marco revolver — another replica. One of the revolvers offered was the Peacekeeper revolver which is an extremely accurate replica of the First Generation Model P. The other revolver is closer to the Armi San Marco revolver and known as the Longhorn. Defendants allege that Mr. Gangi made numerous attempts to obtain a licensing agreement from Plaintiffs. After those efforts failed, the first sales of Mr. Gangi’s replicas were made in June of 2000. Shortly thereafter, the assets ■ of his company were sold to AWA International. Plaintiffs filed this lawsuit in January 2002.
Plaintiffs’ Peacemaker revolver retails for well over $1,000. Plaintiffs also market the “Cowboy” revolver, which they refer to as an “economy version” of the Peacemaker. It retails for approximately $700.
Plaintiffs produced a Peacekeeper revolver from approximately 1985 through 1988. It was not a western style revolver and marketed towards law enforcement and home defense. Plaintiffs contend that they still provide repair services for the revolver.
“The Rampant Colt” is a registered trademark of Plaintiffs’. It is a picture of a horse rearing up with a spear between its forelegs and another in its mouth. It
Plaintiffs’ Armsmear Crest is the family crest of Colt’s founder Samuel Colt. It pictures a horse similar in appearance to the horse visible in the Rampant Colt mark.
Defendants place a logo of a horse on their revolver grips. This logo involves a running horse, as opposed to rearing up, and does not picture any spears, but is inside an oval and appears in a similar location on Defendants’ revolvers. Defendants contend that the logo was designed without reference to Plaintiffs’.
II. STANDARD OF REVIEW:
A party moving for summary judgment must establish that there are no genuine issues of material fact in dispute and that it is entitled to judgment as a matter of law. Fed.R.Civ.P. 56(c);
Anderson v. Liberty Lobby, Inc.,
III. DISCUSSION: 2
A. Plaintiffs’ Trade Dress Claims:
Counts One, Two, Seven, and Eight deal with claims for relief based on Plaintiffs’ alleged trade dress. Defendants move for summary judgment on each of these counts. 3 Defendants’ Motion is denied for the reasons stated herein.
1. Sufficiency of Plaintiffs’ Description of Their Trade Dress:
Defendants argue that Plaintiffs cannot be afforded any protection because they have failed to adequately describe their claimed trade dress. With respect to a product line, a “focus on the overall look of a product does not permit a plaintiff to dispense with an articulation of the specific elements which comprise its distinct dress.”
Landscape Forms, Inc. v. Columbia Cascade Co.,
Plaintiffs argue that although they meet the requirements set out above, because
Yurman
and
Landscape Forms
apply to product lines, not individual products, they are not applicable. PL Br. Opp. Def. Mot. for Summ. J. at 8-9 n. 3. Moreover, Plaintiffs caution against requiring an emphasis on written descriptions of the dress over and above the visual representations submitted.
Id.
at 7,
citing Imagineering, Inc. v. Van Klassens, Inc.,
While the present action does not involve an entire line of products, Plaintiffs do not point to any case law that would prevent a court from imposing similar standards here. Indeed, the reasoning behind Landscape Forms and Yurman Design is persuasive in any trade dress claim. It is more relevant when, as here, the product involved is part of a long and well-known history and where Defendants argue that the design itself is part of the public domain and not Plaintiffs’ to claim. Under these circumstances it is appropriate to require Plaintiff to clearly articulate the basis for its trade dress claim rather than risk overbroad protection and imprecise relief (should any be granted). With that said, the usefulness of visual representations of the product to aid the trade dress definition is not in dispute.
As to the actual description, in their Complaint Plaintiffs describe the trade dress in the following way:
(a) the shape, style, composition and finish of the grip frame;
(b) the angle of the grip frame in relation to the frame and barrel;
(c) the shape, style, composition and finish of the trigger and trigger guard;
(d) the angle or slant of the trigger guard in relation to the frame and barrel;
(e) the shape, style, composition and col- or of the grip panels, including the rampant colt and eagle emblazoned on the sides;
(f) the shape and style of the front sight;
(g) the shape and style of the rear sight;
(h) the shape, style and finish of the checkered hammer;
(i) the shape, style and finish of the color case hardened frame;
(j) the shape, length, style and finish of the steel barrel;
(k) the shape, style and finish of the steel cylinder;
(l) the shape, style and finish of the cylinder pin; and
(m) the shape, style and finish of the ejector rod and ejector rod housing.
Amended Complaint ¶ 43. Although not elaborating on this description in the text of their Opposition Brief, Plaintiffs point to two exhibits to further define the nature of then- claims. PI. Br. Opp. Summ. J. at 10.
In a lengthy response to Defendants’ interrogatory requesting that Plaintiffs more specifically detail the features of the revolver claimed to be unique and/or distinctive, Plaintiffs describe the shape and appearance of the frame, rear sight, hammer, cylinder, cylinder pin, trigger, trigger guard, grips, grip frame, front sight, barrel, ejector rod, ejector rod housing, and some variations in finish and barrel length that are available. See Fortner Decl., Exh. 75. The obvious implication of this description is that Plaintiffs are quite literally claiming the appearance of the entire gun leaving nothing out.
Michael Reissig’s testimony supports this conclusion, explaining that Plaintiffs claim “the overall appearance of the gun.” Decl. of Robert Gill, Exh. 1, Reissig Depo. at 173. According to Reissig, this entails any available barrel length, the current configuration of the front sight, any combination of colors that may appear through the color case hardening process, both the half moon and donut shapes of the ejector rod head (and any variations thereof), the position of the roll marks on the gun, other words appearing on the barrel, the rampant colt and eagle stamped on the grips, the overall appearance of the hammer (including the color, which may include nickel, color-case, plated, blue, and fire blue), and the hammer as it relates to the rest of the appearance of the gun. 4 Id. at 172-89.
Defendants contend that these descriptions are insufficient. In particular, Defendants point to changes in the alleged trade dress over the years and question which changes are part of Plaintiffs’ trade dress claims and which are excluded — if any. Defendants point to changes in the revolver’s frame, including the various frame finishes mentioned above, finishes to the barrel, cylinder, trigger guard and backstrap, variations in hammer shapes and hammer gnurling, base pin, cylinder beveling, ejector rod heads, ejector rod housings, firing pins, front sights, rear sights, trigger guard shapes, and cylinder bushings. Def. Br. Supp. Summ. J. at 7. Defendants also point to variations in the grips ranging from rubber with rampant colt, but no eagle, to rubber with both rampant colt and eagle. Id. at 13. Defendants allege that the grips have been offered in wood with medallions and wood without medallions as well. Id. 5
While disputing the extent and significance of these variations, nowhere do Plaintiffs assert that there have been no variations at all. In fact, Plaintiffs assert that Defendants’ revolver matches some of the variations mentioned and that variation in a 130 year old product is to be expected. Pl. Br. Opp. Summ. J. at 11 and n. 6,
citing Samara Bros. v. Wal-Mart Stores,
On the facts presented, any lack of clarity in Plaintiffs’ descriptions stems from their attempts to claim the entire appearance of the revolver and the difficulty inherent in adequately describing all the requisite details. Should all other elements be met, there is no rule of law known or cited that prohibits a plaintiff from claiming the entire appearance of a product as its trade dress. In this sense, Plaintiffs adequately describe the claimed trade dress. 6
2. Proof of Secondary Meaning:
In order to be protected, trade dress must be distinctive.
See Wal-Mart Stores, Inc. v. Samara Bros.,
a. Advertising Expenditures:
Plaintiffs argue that the “record contains an abundance of evidence” relating to their advertisements. PI. Br. Opp. Def. Mot. for Summ. J. at 69. The record does not support this assertion. Plaintiffs cite only seven exhibits containing catalogs or advertisements that focus on the revolver’s trade dress. Id. Plaintiffs do not produce any evidence of expenditures or other relevant evidence pertaining to advertising. Furthermore, they concede that since 1999 they have not advertised any single action revolver in gun periodicals. Id. at 70. Considering that Plaintiffs have been manufacturing the revolver for about 50 years since resuming production, the evidence produced could properly be denied weight by a fact finder. Nevertheless, Plaintiffs produce some evidence of advertising and therefore the question cannot be resolved on summary judgment and must be counted against Defendants.
b. Consumer Studies:
Plaintiffs point to the survey conducted by Warren Keegan as evidence of consumers linking Plaintiffs’ alleged trade dress with Plaintiffs. The survey Keegan conducted, although “designed to determine consumer confusion of the names, trade symbols, and overall appearance of the two single action revolvers ... also [allegedly] had the effect of testing consumer awareness of the marks and trade dress.” Decl. of H. David Starr, Exh. 26 at 3. To this effect Keegan states that “[w]hen shown the AWA Peacekeeper 67% indicated that they knew who made the gun. Of those, only 26% named AWA while 58% incorrectly named Colt’s.” Id. at 8. This finding does not demonstrate a link between the claimed trade dress with Plaintiffs. In order to demonstrate such a link, consumers surveyed would have to be shown Plaintiffs’ gun and identify Plaintiffs as the manufacturer. Keegan’s report goes on to state that of those who “claimed to know who made the Peacemaker” 91% correctly named Colt, Id., but it is somewhat unclear from the write up whether this refers to people being shown the Peacemaker (thus looking at its trade dress) or the point in the survey when participants are asked (without viewing the revolver itself) whether they have heard of a gun called the Peacekeeper and if they know who manufactures that gun. Based on an examination of the survey results, this statement apparently refers to the former and would be some evidence of secondary meaning. To the extent that it is the latter, that question would have no value towards demonstrating secondary meaning with respect to Plaintiffs’ trade dress.
Defendants argue that this survey cannot be considered evidence of secondary meaning because it was designed to test consumer confusion. Def. Br. Supp. Summ. J. at 68. Defendants point to no law that would require this conclusion and it is not desirable to formulate a rule of law that would prevent consideration of unintended, but relevant, consequences of a survey so long as those results indicate trustworthiness. Defendants also argue that because source indicators were left on the pictures of the revolvers, the survey results are not probative as to secondary meaning. Def. Br. Supp. Summ. J. at 69. Plaintiffs counter that this is irrelevant because participants were not exposed to the manufacturers’ names until towards the end of the survey when they viewed the photographs and even when exposed to the names participants still misidentified Defendants’ revolver as being made by
c.Unsolicited Media Coverage of the Product:
Both parties acknowledge that much has been written about Plaintiffs’ revolvers. Defendants, however, argue that much of what was written focuses on the time period before 1940 when Plaintiffs initially halted production of the revolver and is not relevant to demonstrate secondary meaning today. Def. Br. Supp. Summ. J. at 70-71. As stated above, the relevant period for determining secondary meaning is when Defendants entered the market in 2000. It is unlikely therefore that media coverage from over 60 years ago or pertaining to that period is relevant to that determination. However, Plaintiffs also produce evidence of more recent media attention. Defendants argue that because media attention has been focused on replicas as well, media attention dedicated to Plaintiffs does not demonstrate secondary meaning. Id. at 71. Determining the weight to accord this evidence is properly a question for a trier of fact and not a court on summary judgment.
d.Sales Success:
Plaintiffs contend that since the introduction of its revolver, the total sales reach approximately one million. PI. Br. Opp. Summ. J. at 72. Defendants contend that in recent years replica revolvers have sold at least as many revolvers as Plaintiffs, suggesting a lack of secondary meaning in Plaintiffs’ trade dress. Def. Br. Supp. Summ. J. at 71. Recent sales success is more probative towards demonstrating secondary meaning as it pertains to this action, but a question nevertheless remains as to the proper weight given to each party’s evidence. Attempting to resolve that question would be inappropriate on summary judgment.
e.Attempts to Plagiarize the Product:
Intentional copying may constitute “persuasive evidence of consumer recognition.”
Coach Leatherware Co. v. AnnTaylor, Inc.,
It is undisputed that Defendants were manufacturing replicas of Plaintiffs’ revolver. Furthermore, Defendants’ advertising has at least referenced Plaintiffs’ history and founder Sam Colt. PI. Br. Opp. Summ. J. at 72. While, these facts alone are not necessarily determinative—Defendants point out, there have been manufacturers of similar replicas for years and they continue to this day—Defendants have not presented undisputed evidence that would entitle them to summary judgment. At best, Defendants create a question out of this factor which would have otherwise looked very much like Defendants were purposely trading on Plaintiffs’ good will. Accordingly, summary disposition is unavailable on this factor.
f Length and Exclusivity of Use:
Plaintiffs have been manufacturing their revolvers since 1873. Defendants, however, note that since 1956 Plaintiffs have been competing with other replica makers and that when Defendants began marketing their gun, nine replica sellers were in the market. Def. Br. Supp. Summ. J. at 72. Plaintiffs argue that the significance of “third-party copying depends wholly upon their usage, and third-party marks must be ‘well promoted’ or ‘recognized’ by consumers in order to be of significance.” PI. Br. Opp. Summ. J. at 73,
citing Scarves by Vera, Inc. v. Todo Imports, Ltd.,
g. Conclusion as to Secondary Meaning:
On balance Plaintiffs do not present particularly strong evidence of secondary meaning in their trade dress. However, because there are factual disputes with respect to some of the factors discussed, and a finding of secondary meaning can only be made by a careful consideration of all six factors, with no single factor being determinative, the question cannot be decided as a matter of law, but is properly to be decided by a jury. Accordingly, Defendants’ Motion is denied on this ground.
S. Whether Plaintiffs’ Trade Dress has been Abandoned or is Generic:
Defendants argue that Plaintiffs have either abandoned their trade dress or that it has become generic and is
Even assuming a product design is distinctive, that “is insufficient to protect product designs that are overbroad or generic — those that refer to the genus of which the particular product is a species.”
Yurman Design,
Common usage may render trade dress that was once distinctive generic if, by virtue of the use, the dress “can no longer be understood to represent a source” of the product.
BellSouth Corp. v. DataNational Corp.,
Defendants’ assertion of a defense of abandonment also centers on the interruption in Plaintiffs production of the Peacemaker revolver from 1941 to 1955 and the near constant presence of replica makers since Plaintiffs returned to the market in 1956. Def. Br. Opp. Summ. J. at 60. Plaintiffs argue that they did not intend to permanently cease production of the revolver and that they maintained consumer goodwill during the period of non-production such that when they resumed production in 1956 it retained its secondary meaning among consumers. PI. Br. Supp. Summ. J. at 57-60.
Defendants rely heavily on the Second Circuit’s opinion in
L. & J.G. Stickley, Inc. v. Canal Dover Furniture Co.,
In this respect, the Second Circuit distinguished its decision from
Ferrari S.P.A. Esercizio v. Roberts,
It bears mentioning however, that even “[o]nee a registered trademark has been abandoned, any subsequent user of the mark must measure its rights from the time the subsequent use begins, and cannot rely upon any residual secondary meaning in the mark from the original period of use.”
Id.
at 263-64. This is the case
even if the original user resumes use
of the abandoned trade dress.
Id.
at 264 (emphasis added). Thus, even if a fact-finder were to find that, based on the interruption in production, Plaintiffs’ trade dress lost its secondary meaning, this would not preclude Plaintiffs from rebuilding secondary meaning in the almost 60 years it has been manufacturing the revolvers before Defendants entered the market. All that Plaintiffs would be prohibited from doing is relying on secondary meaning acquired prior to abandoning its trade dress. In this sense, the abandonment argument, even if successful, is not likely to get Defendants far because secondary meaning must be established at the time Defendants entered the market,
Nora Beverages,
J. Functionality: 9
As discussed above, trade dress protection cannot be had for features that
a. Traditional/Utilitarian Functionality:
The Supreme Court recently reasserted the prominence of the so-called “traditional rule” of functionality.
Id.
at 33,
The
TmfFix
decision is also important with respect to the relevance of design alternatives to a functionality inquiry. In the past, the Second Circuit (and others) considered the availability of design alternatives in determining the functionality of a feature.
See e.g. Fabrication Enterprises. v. Hygenic Corp.,
Nevertheless, Plaintiffs argue that this language does not preclude consideration of design alternatives. PL Br. Opp. Def. Mot. for Summ. J. at 20. In support, Plaintiffs cite to a
post-TrafFix
Second Circuit opinion that requires looking to the feasibility of design alternatives.
Id., citing Neiman Marcus Group, Inc. v. A’Lor Int'l, Ltd.,
Other circuits are divided as to the question of design alternatives. The Federal Circuit has found that even though “there is no need to consider the availability of alternative designs ... that does not mean that the availability of alternative designs cannot be a legitimate source of evidence to determine whether a feature is functional in the first place.”
Valu Engineering, Inc. v. Rexnord Corp.,
However, under the present circumstances and given the nature of the product, the existence of design alternatives is helpful for determining whether a particular design is truly necessary to the way the revolver works. For example, Plaintiffs assert that with respect to the grip frame on the revolvers that they are not claiming the handle itself (in layman’s terms), but rather a specific shape of a handle that is separable from the handle itself. In order to determine whether the specific shape is in fact separable, it is instructive to look to whether other shapes exist and whether they are similarly effective. The critical inquiry then is the “feasibility of alternative arrangements of functional features that
would not impair the utility
of the product.”
Fabrication Enterprises,
Because Plaintiffs are seeking trade dress protection for the overall appearance of the revolver, breaking down the trade dress into its individual elements and then attacking them as functional may be error.
Le Sportsac, Inc. v. K Mart Corp.,
i. The shape, style, composition, and finish of the grip frame:
Defendants argue that the shape and style of the grip frame “serve to allow the shooter to best hold the revolver and to handle the recoil of the gun when fired.” Def. Br. Supp. Summ. J. at 32. They also argue that the composition of the frame, steel, works more effectively than other metals and that the finishes that are available (blued or nickeled) prevent oxidation.
Id.
at 33. Plaintiffs’ characterization of Defendants’ arguments as simply allowing “the shooter to grip the gun,” PI. Br. Opp. Summ. J. at 24, (like any grip frame would) misses Defendants’ assertion that the specific shape allows for certain advantages. Defendants point to many other possible designs for the grip frame, but
Plaintiffs also argue that “the contours of the frame do not serve any specific purpose.” Id. This argument is conclusory and nowhere elaborated, not even in the exhibit cited. See Gill Deck, Exh. 19, ¶ 19.
Plaintiffs point to statements by Defendants’ personnel to the effect that because they were making replicas of Plaintiffs guns they chose not to use other possible designs. PL Br. Opp. Def. Mot. for Summ. J. at 25. This does raise a question concerning other possible motivations for using a grip frame similar to Plaintiffs’, but does not address directly the issue of functional advantages. Nowhere is it established that the desire to copy negates or is mutually exclusive to the issue of functionality. That is, there is no reason why Defendants’ desire to copy a feature, as opposed to using similar features on other revolvers, negates functionality.
As to the finishes and metals used on the grip frame, Plaintiffs, while conceding a certain functionality, again simply point to alternatives without establishing that these other finishes and metals would work just as well. Id. at 25.
Accordingly, Plaintiffs fail to meet their burden to produce evidence sufficient to raise a question of nonfunctionality with respect to the grip frame.
ii The angle of the grip frame in relation to the frame and barrel:
Plaintiffs define the angle of the grip frame in relation to the frame and barrel as approximately Tk degrees. PI. Br. Opp. Summ. J. at 25. Plaintiffs assert that this angle is cosmetic 11 and serves to “make the gun look the way it does” but does not serve any function. Id. at 26. Plaintiffs point to no design alternatives that would work just as well. Defendants argue that this angle is functional in that “it positions your hand so that the barrel will shoot.” Def. Br. Supp. Summ. J. at 33. If the angle were different, the user would have to point the barrel differently to make it shoot accurately. Fortner Deck, Exh. 32 at 90. It is not clear whether this angle is necessary to its functioning or merely incidental — i.e. would having to point the barrel differently impede the revolver’s use? On the other hand, it is not clear that Plaintiffs have established nonfunctionality. There is certainly nothing about the angle that prevents it from both giving the gun a distinct look and serving the purpose of correctly lining up the barrel when it is held. The weighing and crediting of these two accounts is therefore in the province of the fact finder and not a court’s on summary judgment. Accordingly, this feature must be considered nonfunctional in considering Defendants’ Motion.
Hi. The shape, style, composition, and finish of the trigger and trigger guard:
The trigger and trigger guard serve the obvious function of firing the gun and protecting against premature firing. Nonetheless, Plaintiffs argue that neither the specific shape (not size) of the trigger
iv.The angle or slant of the trigger guard in relation to the frame and barrel:
Defendants argue that the rounded and slanted shape of the trigger guard aid in holstering the revolver. Def. Br. Supp. Summ. J. at 33-34. Plaintiffs argue that while this may be true, any rounded shape will do and the specific shape of their trigger frame is not therefore necessary and functional. PI. Br. Opp. Summ. J. at 26-27. There is therefore a dispute of fact with respect to this feature which cannot be resolved on summary judgment.
v.The shape, style, composition, and col- or of the grip panels, including the Rampant Colt and eagle emblem emblazoned on the sides:
Defendants allege that users often change the grips on their revolvers for functional (e.g. a better fit) and cosmetic reasons. Def. Br. Supp. Summ. J. at 34. Defendants also argue that the eagle on the sides of Plaintiffs’ grips serve the function of providing a “tactile acknowledgment” that the user has the proper grip on the gun. Id. Plaintiffs counter that any logo would serve the same purpose and there is no need for the logo to involve an eagle as Plaintiffs’ do. PI. Br. Opp. Summ. J. at 28. Plaintiffs do not respond to Defendants’ argument about the generally functional nature of the grips, but Defendants’ argument is conclusory and fails to elaborate how if users change the grips for both functional and cosmetic purposes this demonstrates that the functional aspect of the grips is essential to the use or purpose of the item. Indeed, by their own argument cosmetic reasons may be just as important. Accordingly, although the ultimate burden of persuasion remains with Plaintiff, the burden of production for the purposes of summary judgment on this point has not been properly shifted to Plaintiff.
vi.The shape and style of the front sight:
A front sight serves the obvious purpose of allowing the user to properly aim the revolver. Defendants further contend that the specific shape of Plaintiffs’ sight, namely that it is rounded, eases holstering by preventing snags. Def. Br. Supp. Summ. J. at 35. Plaintiffs argue that there are other designs, including different rounded designs, that would serve the same purpose without affecting quality or effectiveness. PI. Br. Opp. Summ. J. at 28. Accordingly, there are material factual disputes as to the functionality of the front sight.
vii The shape cind style of the rear sight:
Again, the rear sight serves an obvious functional purpose. Although, Plaintiffs
viii. The shape, style, and finish of the checkered hammer:
The hammer is functional in that it allows the revolver to fire. Defendants further contend that the specific shape of the hammer on Plaintiffs’ revolver is functional in that it allows for ease of cocking the revolver and that the knurling or checkering on the hammer aid in the user’s ability to grip the hammer without slipping. Def. Br. Supp. Summ. J. at 36. Plaintiffs once again point to the existence of alternative designs, but in eonclusory fashion without explaining how these alternative designs would not impair the utility of the product. PI. Br. Opp. Summ. J. at 29-30. Plaintiffs also argue that Defendants have acknowledged that they could have used alternative designs. Id. at 30, citing Gill Decl., Exh. 13, Taffin Depo. at 107, 128. The actual transcript is not so blunt and does not necessarily amount to an admission. Accordingly, with respect to the hammer shape, Plaintiffs do not meet their burden to provide evidence that would support a finding of nonfunctionality.
ix. The shape, style, and finish of the color case hardened frame:
Defendants contend that the case frame is functional because it holds the gun together and that the rounded shape of it aids in holstering the revolver. Def. Br. Supp. Summ. J. at 36. While it is of course true that the frame does hold the gun together, Plaintiffs claim is addressed to the specific shape which they allege is not necessary to ensure that the gun is held together. Defendants do not suggest that this particular shape is the only shape that will hold together a revolver. Defendants’ argument concerning the ease of holstering the evidence is not conclusive. As Plaintiffs point out, the testimony on the subject was not unequivocal. PI. Br. Opp. Summ. J. at 30. Finally, Plaintiffs contend that the use of color-case hardening is not what is claimed, but the fact that only the frame is color-case hardened in contrast to the rest of the revolver. Id. Defendants do not contend that this selective use of color-case hardening is functional. Accordingly, the functionality of this feature cannot be decided in favor of Defendants on summary judgment.
The barrel serves the function of providing the path through which the bullet travels when the revolver is fired. All guns must have some sort of barrel. However, this does not end the inquiry and the specific appearance/design of the barrel must be considered. Barrel length is clearly a functional consideration. As Defendants argue, the length of the barrel affects the power and accuracy of a revolver. Def. Br. Supp. Summ. J. at 37-38. Defendants’ reference to historical accuracy does not, as Plaintiffs contend, tip then-hand and demonstrate their motive to copy. As the information cited by Defendants makes clear, the 7.5 inch barrel length was required by the military in order to balance the needs of soldiers for accuracy, power, and convenience of use. O’Meara Deck, Exh. B., Item 8. Plaintiffs do not rebut this argument. Plaintiffs only argue that other lengths are available. PI. Br. Opp. Summ. J. at 31-32. Of course other lengths are available, but changes in barrel length will alter the accuracy and power of the revolver. Accordingly, the length of the barrel by itself is deemed functional.
With respect to other features of the barrel, the answer is not as clear. Defendants contend that the rounded shape aids in holstering. Def. Br. Supp. Summ. J. at 37. Plaintiffs do not address this argument, but instead point to other possible shapes and testimony from Defendants’ witnesses suggesting that were it not for their desire-to manufacture replicas they would have been able to use those designs. PI. Br. Opp. Summ. J. at 31-32. Plaintiffs also point to the arbitrary positioning of their rollmark as part of their trade dress. Id. Accordingly, with respect to these features, there are questions of fact which must be resolved at trial.
xi The shape, style, and finish of the steel cylinder:
As with all of the features of Plaintiffs’ revolver, the cylinder serves a function. However, the question to be resolved is whether the design contains arbitrary or fanciful elements that are not essential to the purpose of the feature. With respect to the cylinder itself, Plaintiffs contend that Defendants could have used “a longer or wider cylinder.” PI. Br. Opp. Summ. J. at 32, citing Gill Deck, Exh. 19, Scheidel Report at ¶ 25. Scheidel’s report does not actually state anything to that effect in the paragraph cited and refers only to the decorative grooves and cylinder pin. Accordingly, Plaintiffs do not meet their burden on summary judgment and the shape and size of the cylinder is deemed functional for the purposes of the Ruling. There is, however, a dispute as to the functionality of the flutes on the cylinder. Defendants allege that the fluting improves balance, allows for heat dissipation, and provide a surface for turning the cylinder. Def. Br. Supp. Summ. J. at 38. Plaintiffs do not dispute that the flutes serve a purpose, but assert that having the same number of flutes, or even any flutes at all is not a mechanical necessity. PI. Br. Opp. Summ. J. at 32. Accordingly, this issue cannot be resolved here.
xii The shape, style, and finish of the cylinder pin:
Defendants argue that in addition to being generally functional, the specific design features of the cylinder pin are functional as well. In particular, Defendants allege that the “ribbed detail and design of the pin ... provide a surface to grasp when removing the pin from a dirty, oily revolver.” Def. Br. Supp. Summ. J. at 38. Plaintiffs counter that some of the features are arbitrary and that other designs would have been acceptable but for Defendants’ purpose to copy Plaintiffs. PI. Br. Opp.
xiii. The shape, style, and finish of the ejector rod and ejector rod housing:
Defendants again point to the ease with which the gun can be holstered based on the specific shape of the features here at issue as well as the possibility of overall greater ease of use. Def. Br. Supp. Summ. J. at 39. Plaintiffs once more simply point to the existence of alternative designs without elaborating on their relative merit compared to the features as they exist on the revolvers at issue. PI. Br. Opp. Summ. J. at 33, citing PI. Exh. Opp. Summ. J., Gill Deel., Exh. 19, Schei-del Report at ¶ 26 (“Defendants could have designed these at least slightly differently from [Plaintiffs’], but chose not to”). While this is not exactly strong evidence of nonfunctionality, Defendants’ evidence in favor of functionality is similarly weak. See Def. Exh. Supp. Summ. J., Fortner Decl., Exh. 45, Scheidel Depo. at 144 (discussing “stories” that he heard about the difficulty of holstering prior to the design at issue) and Exh. 14, Reissig Depo. at 117 (acknowledging the possibility that other designs might get snagged). Accordingly, summary judgment as to the functionality of this feature is inappropriate.
xiv. Functionality of trade dress considered as a whole:
It is clear that there are functional elements to every aspect of Plaintiffs’ revolver. There are, however, also numerous factual disputes as to the functionality of individual features. If there are factual disputes as to the individual elements, then it follows that there would be a factual dispute as to whether these individual features add up to a functional whole. Considering these disputes, it is inappropriate to render summary judgment on the question of functionality. Defendants’ Motion on this basis is denied.
b. Aesthetic Functionality:
If “a design’s aesthetic value lies in its ability to confer a significant benefit that cannot practically be duplicated by the use of alternative designs, then the design is functional.”
Qualitex Co. v. Jacobson Prods. Co.,
Defendants argue that Plaintiffs’ revolver is aesthetically functional because they and other replica makers would no longer be able to make replicas of the revolvers in question and they would no longer be able to meet the “consumer need” of those such as cowboy action shooters who seek historically accurate revolvers but cannot afford to purchase Plaintiffs’ revolvers. Def. Br. Supp. Summ. J. at 43. The argument is baseless. Assuming that Plaintiffs’ trade dress is otherwise protectable, the fact that such protection would shut down a replica industry that is infringing Plaintiffs’ trade dress is not a reason to find aesthetic functionality. However, most determinative is that the question of aesthetic functionality explicitly turns on the existence of design alternatives. As discussed in the
5. Evidence of the Likelihood of Customer Confusion:
“Likelihood of confusion exists when customers viewing the mark would probably assume that the product or service it represents is associated with the source of a different product or service identified by a similar mark.”
Clicks Billiards, Inc. v. Sixshooters Inc.,
Plaintiffs contend that this Court already found that “the similarities of the revolvers raise ‘genuine issues of material facts as to the likelihood of product confusion” ’ and that this finding precludes further consideration of confusion now. PI. Br. Opp. Summ. J. at 41, citing Ruling on Motion for Partial Summary Judgment at 5. Plaintiffs mischaraeterize that Ruling. The Ruling only addressed the dispositive nature of product labels as they pertain to confusion in this case. Accordingly, it has no bearing on the questions now at issue and the Polaroid analysis must be performed.
a. Evidence of Actual Confusion:
For the purposes of trade dress infringement, “actual confusion means consumer confusion that enables a seller to pass off his goods as the goods of another.”
Sports Auth. v. Prime Hospitality Corp.,
Most notably 12 Plaintiffs submit a survey conducted by Dr. Warren Keegan, which purportedly “found significant affirmative misidentification, in that consumers shown photographs of Defendants’ revolver with all markings in plain view identified the maker as Colt.” PI. Br. Opp. Summ. J. at 45. Furthermore, they argue that the “survey also found forty percent of all respondents believed that the guns are made by the same company, or believed the makers to be affiliated, connected or associated.” Id.
Defendants, however, challenge the reliability and admissibility of this survey on numerous grounds. See Def. Br. Supp. Summ. J. at 51-54 and Def. Br. Opp. Summ. J. at 27-59. Defendants’ challenges lead to Plaintiffs’ submission of a Declaration by Keegan in response to Defendants’ claims [Doc. No. 186]. Defendants’ in turn moved to strike this Declaration and in the alternative requested leave to submit a rebuttal expert report [Doc. No. 186].
While not articulated as such, Defendants’ arguments resemble arguments based on Rule 702 of the Federal Rules of Evidence.
See
Fed.R.Evid. 702 (setting forth procedures for challenging the admissibility of expert testimony based on the expert’s qualifications and the quality of his/her work);
see also United States v. Dukagjini,
Regardless of the merit of this argument, Defendants do not characterize their arguments as such and cite no authority involving Rule 702. Accordingly, Plaintiffs
Toys “R” Us
employs a seven factor test of the trustworthiness and admissibility of survey evidence.
To be admissible under Rule 807, the evidence must “fulfill five requirements: trustworthiness, materiality, probative importance, the interests of justice and notice.”
Id.
at 231 (citation omitted). The classic risks the hearsay rule addresses are those of “(1) insincerity, (2) faulty perception, (3) faulty memory and (4) faulty narration.”
Id.
at 232. Survey evidence is susceptible to all these risks as well as an additional class of risk stemming from the fact that “parties usually offer surveys to support statistical inferences.”
Id.
at 233. Such inferences can be manipulated through “artful data collection or presentation” and exacerbated through methodological errors.
Id.
A methodologically sound survey can reduce this danger as well as the danger of insincerity and faulty narration by employing interviewers who lack knowledge of the litigation and posing questions in a “clear, precise and non-leading manner.”
Id.
at 233-34;
see also Zippo Mfg. Co. v. Rogers Imports, Inc.,
Defendants’ arguments go to the issue of relating trustworthiness to probative value (and thus prejudice) allegedly suggested by virtue of the survey’s untrust-worthiness. See Def. Br. Opp. Summ. J. at 33 (discussing the reliability and trustworthiness of the survey). Plaintiffs assert the trustworthiness of the survey and offer no other basis for admissibility. Thus, without adopting the Toys “R” Us factors as the rule in this case, Defendants’ reliance on those factors will be considered as they weigh on the trustworthiness of the survey and in turn its admissibility under the residual hearsay exception.
i The survey universe:
The survey universe refers to the population sample chosen for the survey by those administering it. Keegan’s survey was conducted in gun shops and participants were chosen based on whether they said they might purchase a handgun within the next five years. Defendants contend that Keegan’s survey failed to achieve a relevant consumer group.
First, Defendants allege that the survey should have focused specifically on Defendants’ customers and not potential purchasers of handguns in general. Def. Br. Opp. Summ. J. at 36-37,
citing Hutchinson v. Essence Communications, Inc.,
Defendants also contend that by focusing on individuals who may buy a handgun within five years, the survey universe is overbroad as reaching purchasers of any handgun, not single action revolvers like the ones at issue, and because five years is too open-ended requiring those surveyed to predict their behavior rather than having concrete planned action. Def. Br. Opp. Summ. J. at 37-41. Plaintiffs respond that the survey purpose was to predict future buying behavior and that five years is an appropriate time frame to predict such behavior. PI. Reply Br. Supp. Summ. J. at 6.
ii. Whether the questions posed were leading:
Defendants contend that the questions in Plaintiffs’ survey were, leading and biased. In particular Defendants point to survey questions which, after being shown pictures of either both revolvers, logos, or being asked whether participants were familiar with the names “Peacemaker” and “Peacekeeper,” the participants were asked if they thought the makers of the two products were in any way related.
See
Fortner Deck, Exh. 50: Expert Report of Keegan, Exh. 5, Survey A, at p. 2 (questions 9-10), p. 3 (questions 19-20), p. 5 (questions 26-27)
and
Survey B, at p. 2 (questions 7-8), page 3 (questions 15-16),
Hi. Approximating market conditions:
Defendants argue that the survey fails to approximate actual market conditions as to potential consumers by showing participants photographs and not the actual revolvers and by allowing only a few seconds to view the photographs. Def. Br. Opp. Summ. J. at 52-56. Plaintiffs do not directly respond to this argument. They cite a ease finding a similar survey involving pictures and similar lines of questioning as admissible. PI. Reply Br. Supp. Summ. J. at 7,
citing McGraw-Edison Co. v. Walt Disney Productions,
iv. Other Alleged Methodological Deficiencies:
Defendants argue that Keegan’s participation in the survey, by personally conducting 18 surveys with his son conducting an additional 20, was impermissible and that the failure to utilize controls rendered the survey results suspect. Def. Br. Opp. Summ. J. at 35-36 and 41-42. Plaintiffs argue that controls were unnecessary and that Keegan’s participation in the survey was not impermissible and in any event harmless. PI. Reply Br. Supp. Summ. J. at 5-6.
v. Conclusion as to admissibility:
Defendants raise serious questions about the trustworthiness of the survey. As discussed above, participation in the administration of the survey by those with knowledge of the litigation and the use of leading questions raise the risk of insincerity in responses and cast doubt on the trustworthiness of the survey.
Schering Corp.,
To be reliable surveys “must rely upon responses by potential consumers of the products in question.”
Dreyfus Fund, Inc. v. Royal Bank of Canada,
However, even considering all these arguments together, because the survey focuses on direct perception of the marks, even if through photographs, it approximates “a particular memory survey[,]”
Schering Corp.,
b.Customer Sophistication:
It is not disputed that the revolvers at issue, while ranging in price, are a significant investment.
See
Def. Br. Supp. Summ. J. at 55 (stating price range for single action revolvers from $375 to over $1900). Furthermore, it is undisputed that potential customers will exercise great care in purchasing a revolver.
Id.
at 55-56. Defendants argue that these facts suggest that customers are not confused between the two brands of revolvers and require a finding that this factor weighs in their favor. Plaintiffs advance two arguments with respect to customer sophistication: 1) that the sophistication of customers alone does not resolve the issue of confusion, and 2) that customer sophistication, while potentially relevant to point of sale confusion, it is not equally relevant towards assessing initial interest confusion, post-sale confusion, and confusion as to source sponsorship or affiliation. PI. Br. Opp. Summ. J. at 52-53. Plaintiffs’ arguments seem a concession that customer sophistication, at least with respect to point of sale confusion, weighs in favor of Defendants. Regardless, as stated above, no one factor in this analysis is dispositive,
Estee Lauder,
c. Strength of the Mark:
“The strength of a mark is its tendency to identify the goods sold under the mark as emanating from a particular, although possibly anonymous, source.”
Cadbury Beverages,
d. Degree of Similarity:
Defendants contend that because certain features of Plaintiffs’ alleged trade dress do not appear on their revolver, the products are not confusingly similar.
See
Def. Br. Supp. Summ. J. at 82 (Pointing to differences in the finish of the hammer, the lack of Plaintiffs’ rollmark, the “rampant colt” symbol on the frame, and that one of Defendants’ revolver, “The Longhorn,” does not have similar grips to Plaintiffs’). While this may be, it is also undisputed that Defendants’ revolver is intended to be a replica thus suggesting a not insignificant similarity between the two products. Indeed, it would be disingenuous for Defendants to argue that the overall appearance of the revolvers was
e. Market Proximity and Likelihood that Prior Omier will Bridge the Gap:
Market proximity refers to the “likelihood that customers may be confused as to the source of the products, rather than as to the products themselves.”
Charles of Ritz Group, Ltd. v. Quality King Distributors, Inc.,
f. Defendants’ Good/Bad Faith:
“[Ejvidence
of
intentional copying raises a presumption that the second comer intended to create a confusing similarity.”
Charles of Ritz Group,
g. Quality of Defendants’ Product:
The parties dispute whether there is actually a difference in quality between the revolvers.
See
PI. Br. Opp. Summ. J. at 43 (arguing that Defendants have admitted the inferior nature of their product)
and
Def. Br. Opp. Summ. J. at 27 (arguing that any difference goes to cosmetics, not quality/performance). Assuming however that there is a difference in quality, both parties dispute the legal significance such a concession.
Compare Charles of Ritz Group,
h. Aggregate Analysis:
Factual disputes exist on every factor except customer sophistication and degree of similarity which weigh in favor of Defendants and Plaintiffs respectively. Accordingly, the undisputed evidence does not “lead only to one conclusion” and summary judgment in favor of Defendants on likelihood of confusion is not possible.
Cadbury Beverages,
6. Conclusion as to Trade Dress Claims:
Because Plaintiffs’ description of its claimed trade dress is legally sufficient, there are factual questions as to its functionality, and likelihood of confusion, Defendants’ Motion for Summary Judgment on Plaintiffs’ trade dress claims, Counts One, Two, Seven, and Eight is denied.
B. Plaintiffs’ Unregistered “Peacekeeper” Trademark:
Defendants move for summary judgment on Count Five which claims infringement of Plaintiffs’ alleged trademark in the name “Peacekeeper.” Plaintiffs manufactured and sold a double action revolver under the name “Peacekeeper” from approximately 1985 to 1987. Plaintiff no longer manufactures the revolver, but continues to provide repair services. The revolver is not a western style revolver and is targeted at law enforcement and home defense. It is undisputed that Plaintiffs never registered the “Peacekeeper” trademark.
Defendants argue that Plaintiffs have abandoned any rights they may have had in the Peacekeeper when they ceased producing the revolver in 1987. Def. Br. Supp. Summ. J. at 73-74. Plaintiffs do not
C. Plaintiffs’ Registered “Peacemaker” and “Rampant Colt” Trademarks:
Parties submit cross-motions for summary judgment as to Counts Three and Four dealing with Plaintiffs’ registered “Peacemaker” and “Rampant Colt” trademarks. Plaintiffs claim that Defendants “Peacekeeper” mark infringes on their “Peacemaker” mark and that Defendants’ running horse style unregistered mark infringes on their “Rampant Colt” registered mark.
There are two distinctions between the marks at issue now and Plaintiffs’ trade dress claims discussed above: 1) the two marks are not product designs; and 2) Plaintiffs’ marks are both registered. Because product designs are not at issue, there is no prohibition on Plaintiffs’ marks being inherently distinctive.
See Wal-Mart Stores,
1. Actual Confusion:
This factor is identical to the issues discussed above. Plaintiffs’ survey provides evidence of actual confusion with respect to the marks at issue here. However, given the serious questions as to the weight that it should be afforded, for purposes of the cross motions for summary judgment, there is a question of fact as to actual confusion and this factors weighs in neither party’s favor.
%. Customer Sophistication:
The discussion necessary under this factor is also identical to the discussion above.
S. Strength of the Mark:
The marks here are different than the trade dress discussed above. As a consequence, this factor must now be addressed with respect to the “Rampant Colt” and “Peacemaker” marks. As above, strength is evaluated based on distinctiveness, however, here distinctiveness is measured on a sliding scale from least distinctive to most distinctive: (1) generic; (2) descriptive; (3) suggestive; and (4) arbitrary or fanciful.
TCPIP Holding Co. v. Haar Communs., Inc.,
a. “The Peacemaker”:
Plaintiffs argue that this mark is arbitrary or, at the very least, suggestive. PI. Br. Supp. Summ. J. at 24. Defendants, however, produce evidence that the term “Peacekeeper,” or substantially similar marks, have been used as a mark both to refer to firearms and to other types of products. Def. Br. Opp. Summ. J. at 22, Parent Deck, Exh. 31. Considered by itself the mark “Peacekeeper” as applied to a revolver is suggestive or arbitrary. However, common usage of the same mark can reduce the strength of the mark and the likelihood of confusion.
Amstar Corp. v. Domino’s Pizza, Inc.,
b. The “Rampant Colt”:
Again, this is a mark that is in no way descriptive and taken on its own is arbitrary or fanciful. Defendants, however, claim that horse symbols are used even more often among western style firearms. Def. Br. Opp. Summ. J. at 22-23. Defendants further argue that Plaintiffs’ failure to police these uses has resulted in a weakening of the mark.
Id.
at 23. The mere use of a horse in a mark is not sufficient to weaken all other marks that involve horses. Defendants attempt to cast Plaintiffs’ claims in an overbroad manner such that if they are afforded protection all other manufacturers will be precluded from using horse symbols on their firearms. This conclusion is of dubious value, nevertheless, it need not be examined as Defendants fail to produce enough evidence to suggest that similarly styled marks have weakened Plaintiffs’ registered mark. The inclusion of a couple photographs of replica grips,
see e.g.
Parent Deck, Exh. 20 and 30,
Jp. Similarity of the Marks:
The parties, not surprisingly, take wildly diverging positions on this factor. See Def. Br. Opp. Summ. J. at 7-13 and PI. Br. Supp. Summ. J. at 27-29. Suffice it to say that the two marks are not so dissimilar that it is impossible to reasonably anticipate consumer confusion, but neither are they so similar that the conclusion of consumer confusion is unavoidable or even predictably likely. Accordingly, the resolution of this question lies within the province of the fact-finder and cannot be resolved on summary judgment. Considering that cross-motions have been filed this factor must be construed in favor of neither party.
5.Proximity of the Products and the Likelihood of Bridging the Gap:
The analysis with respect to the marks “Peacekeeper” and “Rampant Colt” is the same as that pertaining to Plaintiffs’ trade dress claims. Because there was a dispute of fact with respect to that discussion, there is also a question of fact here. This factor falls in favor of neither party.
6.Defendants’ Good/Bad Faith:
As above, “evidence of intentional copying raises a presumption that the second comer intended to create a confusing similarity.”
Charles of Ritz Group,
7.Quality of the Products:
The parties address this factor as it applies to the products the marks designate and not the marks themselves. Accordingly, there is nothing to add to the analysis as it pertained to Plaintiffs’ trade dress. Because the parties dispute whether there is a difference in quality, there is a similar question of fact here.
8.Conclusion as to Likelihood of Confusion:
The bulk of the factors do not weigh in either parties’ favor, but rather weigh against both for the purposes of summary judgment. Accordingly, the likelihood of confusion between Plaintiffs’ and Defendants’ marks cannot be resolved here and both Plaintiffs’ and Defendants’ Motions for Summary Judgment are denied with respect to Counts Three and Four.
D. Plaintiffs’ Unregistered “Arms-mear Crest”:
In Count Six of their Amended Complaint, Plaintiffs claim infringement of their unregistered Armsmear Crest mark, which is the family crest of Plaintiffs’ founder Samuel Colt. See PI. Br. Opp. Summ. J. at 79. Defendants move for summary judgment on this Count.
Defendants argue that them running horse symbol is not similar to the Arms-mear Crest and that even if it was, Plaintiffs’ use of the crest does not establish exclusivity,
see
Def. Br. Supp. Summ. J. at
E. Defendants’ Affirmative Defenses and Counterclaims:
1. Acquiescence:
Defendants assert the affirmative defense of acquiescence and move for summary judgment on that ground. Plaintiffs cross-move for summary judgment on the ground that Defendants are not entitled to an acquiescence defense.
Acquiescence “requires proof of three elements: (1) the senior user actively represented that it would not assert a right or a claim; (2) delay between the active representation and assertion of the right or claim was not excusable; and (3) the delay caused the defendant undue prejudice.”
Times Mirror Magazines, Inc. v. Field & Stream Licenses Co.,
In this case, Defendants allege that Plaintiffs were on notice as to Defendants intentions as early as April 1999 when a meeting took place between representatives from Plaintiffs’ company and Defendants’. Def. Br. Supp. Summ. J. at 77. Defendants brought to the meeting an example of the replica revolver they were planning to sell.
Id.
Another meeting took place in 1999 and then in January of 2000, Defendant RJG displayed one of Defendants’ replicas at the SHOT Show in Las Vegas.
Id.
at 77-78. In February and March of 2000 Defendants sent letters to Plaintiffs advising them of their efforts to manufacture replicas.
Id.
at 78. Defendants entered the market in June or July of 2000. PI. Br. Opp. Summ. J. at 77. In the spring of 2001, Plaintiffs sent Defendants a cease and desist letter, filing suit in January of 2002.
Id.
Defendants argue that the failure to raise the issue of infringement in the parties’ several meetings constituted a representation that Plaintiffs would not assert a claim and that the period of delay between the meetings and
Regardless of whether failure to raise the issue of infringement at the meetings constituted a representation that Plaintiffs would not assert a right, Plaintiffs delay is not unduly prejudicial. As cited, Plaintiffs were not under any obligation to file suit or assert their rights until ripe. Plaintiffs’ claims were certainly not ripe prior to Defendants’ entry into the market and thus Plaintiffs’ delay was for a period of less than two years. This delay is not unduly prejudicial as a matter of law. Many statute of limitations allow a party two years to assert their claim by filing suit. Defendants’ Motion for Summary Judgment based on a defense of acquiescence is denied and Plaintiffs’ Motion for Summary Judgment on Defendants’ acquiescence defense is granted.
2. Plaintiffs’ Entitlement to Monetary Damages:
Defendants move for summary judgment on the question of damages, arguing that based on the facts involved, Plaintiffs have no entitlement to monetary damages.
Generally under Section 35 of the Lan-ham Act a plaintiff is entitled, “subject to the principles of equity, to recover (1) defendant’s profits, (2) any damages sustained by the plaintiff, and (3) the costs of the action.” 15 U.S.C.S. § 1117(a) (LEXIS 2004). However, to recover any damages Plaintiffs must be able to prove “actual consumer confusion or deception resulting from the violation ... or that the defendant’s actions were intentionally deceptive thus giving rise to a rebuttable presumption of consumer confusion.”
George Basch Co. v. Blue Coral, Inc.,
3. Damages Under the Connecticut Unfair Trade Practices Act (CUTPA):
Under the CUTPA, Plaintiffs may be entitled to recover actual damages, pu
nitive
J. Defendants’ False Designation of Origin and Advertising Claims:
Defendants make several separate false advertising claims and one false designation of origin claim. The parties file cross motions on one of Defendant’s false advertising claims — namely that Plaintiffs’ revolvers are made in the United States— and Defendants move for summary judgment on all of Defendants’ remaining counterclaims.
Under the Lanham Act,
(1) Any person who, on or in connection with any goods or services, or any container for goods, uses in commerce any word, term, name, symbol, or device, or any combination thereof, or any false designation of origin, false or misleading description of fact, or false or misleading representation of fact, which—
(A) is likely to cause confusion, or to cause mistake, or to deceive as to the affiliation, connection, or association of such person with another person, or as to the origin, sponsorship, or approval of his or her goods, services, or commercial activities by another person, or
(B) in commercial advertising or promotion, misrepresents the nature, characteristics, qualities, or geographic origin of his or her or another person’s goods, services, or commercial activities,
15 U.S.C.A. § 1125(a).
In order to establish standing to bring a claim Defendants must
demonstrate a “reasonable interest to be protected” against the advertiser’s false or misleading claims, and a “reasonable basis” for believing that this interest is likely to be damaged by the false or misleading advertising. The “reasonable basis” prong embodies a requirement that the plaintiff show both likely injury and a causal nexus to the false advertising.
Havana Club Holding, S.A. v. Galleon, S.A.,
While Defendants here need not be “a direct competitor, it is apparent that, at a minimum, standing to bring a section 43 claim requires the potential for a commercial or competitive injury.”
Id.
In other words, there must be more than a “subjective belief’ in damages.
A party asserting a false advertising claim must demonstrate that the challenged statement is false. “Falsity may be established by proving that (1) the advertising is literally false as a factual matter, or (2) although the advertisement is literally true, it is likely to deceive or confuse customers.”
NBA v. Motorola, Inc.,
Finally, it must be established that the alleged falsity deals with an inherent quality or characteristic of the product such that consumers would consider it material and influence their purchasing decisions.
NBA,
a. “Made in the USA”:
In their First Counterclaim, Defendants assert that numerous periodical references (either in advertisements or other stories) to Plaintiffs’ Cowboy revolver state that it is made in the U.S.A. and that this designation is false. Def. Br. Supp. Summ. J. at 96-99. Many of the references cited appear in periodicals prior to Defendants’ entry into the market in the year 2000. With respect to those references, Defendants lack standing to pursue a claim of false advertising under the Lanham Act. At the time the ads appeared, Defendants were not in direct competition with Plaintiffs. Accordingly Defendants are held to a higher standard with respect to demonstrating injury and causation. The only claim Defendants make is that the references in various periodicals could have “enhanced the public’s perception of the Cowboy revolver as ‘Made in the USA.’ and negatively impacted [Defendants] at the time it was entering the replica revolver market.” Def. Br. Opp. Summ. J. at 95. This argument is pure speculation. Defendants produce no specific evidence to back up this claim and it simply does not amount to a “more substantial showing” of either injury or causation. Defendants, therefore, have no standing to assert a claim involving periodical references that appeared before they entered the market.
Defendants also cannot demonstrate injury with respect to those periodical references that appeared after the year 2000. While Defendants conducted a consumer survey that suggests whether a revolver is of domestic origin is an important consideration to many firearms purchasers, Def. Br. Supp. Summ. J. at 99-100, it is undisputed that Defendants’ revolvers are of foreign origin. Assuming Plaintiffs’ revolvers are not of domestic origin, there is no evidence to suggest that if consumers knew the truth of its origin they would cease to care about the revolvers domestic origin and purchase Defendants’ foreign produced revolvers. It is therefore unclear how Defendants are damaged. Plaintiffs may reap some undue benefit, but at best this injures other manufacturers whose products are manufactured in the U.S. and not Defendants. There is no reasonable basis to infer “likely injury” or a “causal nexus.”
Havana Club Holding,
b. Claims of Historical Significance:
In their First Counterclaim, Defendant AWA claims that Plaintiffs’s advertising their single action revolvers, in particular the Model P, as the “gun that won the west” is false advertising under the Lanham Act. See 15 U.S.C. § 1125(a)(1)(B). Plaintiffs’ move for summary judgment on this counterclaim.
Defendants argue that because historical significance is important to consumers purchasing western style revolvers, Plaintiffs’ advertising is material and, if false, likely to draw away customers causing injury to Defendants. Def. Br. Opp. Summ. J. at 96-97. Defendants argue that it is not true that Plaintiffs’ revolvers won the west and that the Winchester 73 rifle is the gun that won the west. Id. at 97.
Defendants arguments are based on an overly literal interpretation of Plaintiffs’ advertising. The statement is clearly a form of puffing and not entirely susceptible to proof or disproof. If one is inclined to be so literal, an inanimate object, such as a gun, cannot literally win anything such as a war or the drive to colonize the western region of this country. While the use of a revolver or rifle may have helped individuals “win the west,” 17 which single firearm was decisive, if any, is not the sort of question subject to resolution. While any claim may have some basis in fact, the claim of exclusive responsibility is inevitably an exaggeration. The statement, much like “Energizer Bunny” going on and on or “The Best a Man Can Get” is a form of puffing, not literal truth. Accordingly, Plaintiffs’ Motion for Summary Judgment on this claim is granted.
c. Designation of Origin on Plaintiffs’ Rollmark:
Plaintiffs move for summary judgment on Defendant AWA’s Second Counterclaim, which asserts that the rollmark on the barrel of Plaintiffs’ revolvers which reads “Colt’s Pt. F.A. Mfg. Co. Hfd Conn. USA” is a false designation of origin. Plaintiffs argue that they are the corporate descendants of Colt’s Patent Firearms Manufacturing Company, the company whose name is abbreviated on the roll-mark, and are thus entitled to use the
Defendants’ base their opposition solely on the argument that because Plaintiffs’ revolvers have been manufactured in West Hartford and not Hartford, Connecticut since at least 1994, the rollmark is literally false. Def. Br. Opp. Summ. J. at 97. It is noteworthy that the rollmark itself does not represent that the products were actually manufactured in Hartford and could be easily read to reference the corporate address not the manufacturing address. However, even assuming that there is some falsity to the rollmark, Defendants cannot demonstrate materiality. Defendants conclusorily argue that “historical authenticity” is important to consumers of western style revolvers and that one should assume that the difference between Hartford and West Hartford is crucial to that authenticity such that a corporate address in Hartford is not sufficient to establish the appropriate level of authenticity. Id. There is simply no evidence produced to suggest this level of attention to detail. As a consequence, Plaintiffs’ Motion for Summary Judgment on Defendants’ Second Counterclaim is granted.
5. Defendants’ CUTPA Claim:
The CUTPA states that “[n]o person shall engage in unfair methods of competition and unfair or deceptive acts or practices in the conduct of any trade or commerce.” Conn. Gen.Stat. § 42-110b(a) (LEXIS 2004). In order to determine what is unfair, a court must consider:
(1) [W]hether the practice, without necessarily having been previously considered unlawful, offend public policy as it has been established by statutes, the common law, or otherwise- — whether, in other words, it is within at least the penumbra of some common law, statutory, or other established concept of unfairness; (2) whether it is immoral, unethical, oppressive, or unscrupulous; (3) whether it causes substantial injury to consumers [ (competitors or other businessmen) ]
Web Press Services Corp. v. New London Motors, Inc.,
Defendant AWA’s Third Counterclaim alleges a violation of the CUTPA when Plaintiffs filed a letter of protest with the United States Patent and Trademark Office (“PTO”) on December 7, 2001 over Defendant AWA’s attempt to register the trademark “Peacekeeper.” In that letter, Plaintiffs informed the PTO of their registration of the mark “Peacemaker.” Then, after this lawsuit was filed, Plaintiffs filed a second letter of protest on February 20, 2002 requesting that the application for registration be suspended pending the outcome of this litigation. That request was granted and the PTO suspended action on Defendant AWA’s application. Defendants argue that because Plaintiffs never registered the “Peacekeeper” mark “their effort to block [Defendant] AWA’s registration was in bad faith.” Def. Br. Opp. Summ. J. at 99. Defendants also argue, based on the counterclaims concerning false designation of origin and advertising, that a violation of the Lanham Act is a per se violation of the CUTPA and that they are therefore entitled to relief under the CUTPA. Id. at 98.
Plaintiffs move for summary judgment on the basis that their actions are simply
For Defendants to go forward they are essentially asking the Court to find that actions taken in the context of governmental administrative and/or judicial proceeding can constitute unfair methods of competition and unfair, deceptive acts, or practices in the conduct of trade or commerce. Without finding that this would never be possible, it would at least have to amount to more than a simple assertion of what Plaintiffs believe to be their legal rights.
See e.g. Suburban Restoration Co. v. ACMAT Corp.,
6. Whether the Name “Single Action Army” and the Peacemaker Trade Dress is Generic or Abandoned:
Defendant AWA’s Fourth and Fifth Counterclaims allege that the name “Single Action Army” (which in their Amended Complaint Plaintiffs assert is their common law trademark) and the Peacemaker trade dress is generic and/or abandoned. Defendants arguments on these claims have already been addressed, however, Plaintiffs also move for summary judgment on these issues. Although Defendants did not establish their right to summary judgment on the question of whether the trade dress is generic, the continued existence of replica makers does raise a question of fact.
See BellSouth Corp.,
Similarly, the issue of abandonment has been addressed. Plaintiffs arguments center around the maintenance of secondary meaning during the period of non-production and that secondary meaning in their trade dress did not, as a matter of law, dissipate. PI. Br. Supp. Summ. J. at 59. Plaintiffs certainly raise a question of fact as to whether they maintained secondary meaning, but considered against the plausible claim that the existence of replicas weakened that distinctiveness the issue cannot be resolved on summary judgment. Accordingly, Plaintiffs’ Motion for Sum mary Judgment on Defendants Fourth and Fifth Counterclaim on abandonment is denied. Parties are, however, cautioned again that focusing too much on this period of non-production may not bear on any dispositive question of fact or law.
Finally, Plaintiffs argue that they are entitled to summary judgment on Defendants’ counterclaim on the name “Single Action Army.” This argument is curious in that neither parties’ briefs contain any particularized discussion of this name. Plaintiffs’ Brief Supporting their Motion focuses on the failure of Defendants’ argument about copying to demonstrate that the trade dress is generic, but does not address how this applies to a product name. It may apply in the same manner, but the argument must be made. Defendants Opposition Brief not surprisingly also focuses on the “overall appearance” of the trade dress and not the name “Single Action Army.” See Def. Br. Opp. Summ. J. at 71-80. The same holds true for Defendants’ Brief in Support of their Motion. See Def. Br. Supp. Summ. J. at 60-74. Plaintiffs have therefore not met their initial burden on summary judgment and their Motion is denied.
IV. CONCLUSION:
For the reasons stated herein, Plaintiffs’ Motion for Summary Judgment [Doc. No.157] is granted in part, denied in part. Plaintiffs’ Motion is granted with respect to Defendants’ acquiescence defense and Defendant AWA’ First, Second, and Third Counterclaim. It is denied with respect to all other issues. Defendants’ Motion for Summary Judgment [Doc. No. 144] is granted in part, denied in part. Defendants’ Motion is granted with respect to Count Five of Plaintiffs’ Amended Complaint and denied with respect to all other Counts. Additionally, Defendants’ Motions to Strike [Doc. Nos. 186 and 193] are denied.
SO ORDERED.
Notes
. Unless otherwise noted, the facts are taken from the parties’ Local Rule 56(a) statements of material facts not in dispute.
. It bears mentioning at the outset that the hostility evident in both parties’ briefs is entirely inappropriate and unprofessional. Referring to another party’s argument as preposterous, ludicrous, absurd, or anything similar does nothing to advance rational discussion of an issue or aid in its resolution. In fact, such language has the tendency to discredit rather than bolster legal arguments.
. Count Eight asserts a violation of the CUT-PA. Defendants do not make any arguments
tailored to the CUTPA. Presumably they are relying on the fact that many courts view a violation of the Lanham Act as a per se violation of the CUTPA.
See e.g. Timex Corp. v. Stoller,
. The witness does not appear to claim the actual firing pin, but rather as stated how the shape of the hammer looks in relation to the rest of the gun. Reissig Depo. at 187:17-20.
. Plaintiffs object to some of Defendants' evidence in support of this contention as hearsay. PL Br. Opp. Summ. J. at 11 n. 7. Plaintiffs’ objection is conclusory and does not properly raise the question. It will not be considered.
. It should be noted however that Plaintiffs are bound to what they claim and it is therefore possible that relatively minor variations in the replicas may affect the overall appearance and defeat Plaintiffs claims.
. Of course, the significance of this fact may be mitigated by weighing the import of evidence of intentional copying. No position is taken on the outcome of this balancing of factors here.
. This procedural detail is important in that the Second Circuit did not prevent Stickley from going forward, as Defendants ask this Court to do, rather they merely found that the claim was unlikely to succeed and did not warrant a preliminary injunction.
. It is important to keep in mind that with respect to most of the discussion of function ality that it is geared towards whether or not Defendants have properly supported their Motion and if so whether Plaintiffs produce enough evidence to survive summary judgment on that point. The Ruling is thus narrowly tailored to the adequacy of Plaintiffs’ response to Defendants' arguments. This should not detract from or bear on Plaintiffs’ ultimate burden to affirmatively prove non-functionality at trial, which is distinct from their burden at summary judgment.
. The left side of the Model P revolver includes three patent dates corresponding to U.S. Patent No. 119, 048 (issued 9/19/1871), U.S. Patent No. 128, 644 (issued 7/2/1872), and U.S. Patent No. 158, 957 (issued 1/19/1875). Def. Br. Supp. Summ. J. at 44. Defendants argue that because features of the alleged trade dress are pictured in the drawings pertaining to the 1873 and 1875 patents, those features have been dedicated to the public and are not protectable.
Id.
at 44-47. It is generally true that "the claim of a specific device or combination, and an omission to claim other devices or combinations apparent on the face of the patent, are, in law, a dedication to the public of that which is not claimed.”
Miller v. Brass Co.,
. Defendants argue that Plaintiffs’ witness has conceded functionality. Def. Br. Supp. Summ. J. at 33, citing Def. Exh. 14 at 98-101. Plaintiffs witness does make this concession but consistently asserts the purely cosmetic nature of this feature.
. Plaintiffs also submit anecdotal evidence from one consumer claiming that he bought Defendants’ product believing it to be Plaintiffs'. PI. Br. Opp. Summ. J. at 43-44. While such evidence is in theory admissible, it is also within a court’s discretion to exclude it.
Nora Beverages,
. Defendants do not argue that the test formulated by Toys “R" Us in the hearsay context is equally applicable to a Rule 403 objections. Accordingly, this analysis will proceed under the statutory framework under which the test cited was formulated.
. It is not necessary to limit the survey to those who currently identify themselves as shooters or collectors in order to reach the demographic at issue. The survey could have been limited to those who have an interest in shooting or collecting historically accurate guns. Thus, Plaintiffs’ arguments that to so limit the survey universe would exclude relevant potential consumers, PI. Br. Opp. Summ. J. at 50, is unavailing.
. Assuming arguendo that the analysis could proceed past the question of actual confusion, Plaintiffs' briefing on the issue of entitlement to profits is incomplete. There are three "categorically distinct” bases for awarding Defendants’ profits to Plaintiffs, namely, "if the defendant is unjustly enriched, if the plaintiff sustained damages from the infringement, or if the accounting is necessary to deter a willful infringer from doing so again.”
George Basch Co.,
. Assuming arguendo that Defendants had standing, it is unlikely that they could show that the Cowboy revolver was not made in the United States. The Federal Trade Commission (FTC) has enunciated an "all or virtually all” standard to evaluate made in the U.S.A. claims or origin. See Enforcement Policy on U.S. Origin Claims, available at http:llwww.ftc.gov/osll997/12lepsmadeusa.htm (last accessed on March 29, 2004). Under the FTC standard, there is no bright line rule and consideration should be given to 1) the location of final assembly; 2) the portion of total manufacturing costs assigned to the United States; and 3) the degree of removal of the foreign input from the finished product.
Defendants argue that because the frame, trigger guard, hammer, frontstrap, backstrap, ejector rod, and ejector rod housing are all cast in Canada the revolver is not of domestic origin. Def. Br. Supp. Summ. J. at 99. It is, however, undisputed that the Cowboy revolver is assembled in the United States. Plaintiffs also contend that approximately 12-15% of manufacturing costs can be assigned to foreign sources, thus leaving at least 85% to the United States. PL Br. Opp. Summ. J. at 92. Defendants do not provide any evidence to the call into question this statistic. Finally, the revolver is machined, polished, finished, assembled, and packaged in the United States. Id. at 93. Thus, the only part of revolver’s manufacturing that is attributable to non-US sources is the initial casting of some of the components of the revolver and the final product is greatly removed from the foreign input. These facts would likely be sufficient to sustain a finding that the revolver is made in the United States.
. As the saying goes, "Guns don't kill people, people kill people...”
