| Mass. | Oct 18, 1904

Barker, J.

The plaintiff and a fellow workman were cleaning a casting in the 'defendants’ foundry. The process was- for one workman to hold the edge of a cutter next to the projection to be removed from the casting and for the other workman to. strike the head of the cutter with a hammer. The cutter had a wooden handle inserted in it similar to that of an ordinary hammer. The pieces removed from the casting would be made to fly off by the force of the blow. The blows of the hammer also tended to knock off bits of the head of the cutter, and it was the plaintiff’s contention that a piece of the cutter’s head flew up and entered his eye, causing the injury for which he sought compensation. A count under the employers’ liability act was waived, and the trial proceeded under the common law count. At the close of the evidence a verdict was ordered for the defendants, and the case is here upon the plaintiff’s exception to that order.

*566The negligence alleged was a failure to furnish and keep in repair proper tools; and the defect in tools was alleged to be a loose handle in the cutter and a battered and worn condition of its head.

The undisputed evidence showed that there were upon the premises for the use of the workmen about a dozen cutters, and that the selection of the one in use at the time of the accident was made from several of them by a fellow servant of the plaintiff, who took it from among a number because it was pointed. There is nothing in the evidence to indicate that the other cutters were not free from the defects relied on by the plaintiff. There was no evidence that the handle of the cutter was loose at the time, or that a looseness of the handle would tend to cause the accident. The fellow servant who selected the cutter testified that he picked it out because it was newly pointed, and that the cutters from among which he selected it were in the blacksmith shop. The evidence was that the blacksmith shop was the place for a man to go and get a cutter if he needed one. The cutter itself was put in evidence, and from its appearance it could be inferred that pieces had been knocked from its head by the blows of a hammer when the cutter was in use. There was uncontradicted testimonj>- from one of the defendants tending to show that there was no greater probability or possibility of chips flying from a cutter in the condition of the one in evidence than from one just from the hands of the manufacturer, and that the first blow of the hammer may split scales from a cutter. There was also uncontradicted evidence tending to show that the blacksmith had charge to see that such tools or appliances were in suitable condition. Upon this state of the evidence we are of opinion that it could not be found that there was any want of due care on the part of the defendants to furnish and keep in order proper and suitable cutters in sufficient numbers for the work, and that if there was any negligénce in the selection of the cutter in use it was the fault of the plaintiff’s fellow servant who made the selection. See Johnson v. Boston Towboat Co. 135 Mass. 209" court="Mass." date_filed="1883-06-21" href="https://app.midpage.ai/document/johnson-v-boston-tow-boat-co-6420988?utm_source=webapp" opinion_id="6420988">135 Mass. 209; Carroll v. Western Union Telegraph Co. 160 Mass. 152" court="Mass." date_filed="1893-11-28" href="https://app.midpage.ai/document/carroll-v-western-union-telegraph-co-6424728?utm_source=webapp" opinion_id="6424728">160 Mass. 152; Allen v. Smith Iron Co. 160 Mass. 557" court="Mass." date_filed="1894-03-01" href="https://app.midpage.ai/document/allen-v-g-w--f-smith-iron-co-6424843?utm_source=webapp" opinion_id="6424843">160 Mass. 557.

Exceptions overruled.

© 2024 Midpage AI does not provide legal advice. By using midpage, you consent to our Terms and Conditions.