Fell built his invention upon a device very common in the rolling mill art, a pair of skewed rolls. These consist of an upper and a lower horizontal shaft, each carrying a roll with such concavity in its surface that the pipe may travel between the two, while moving longitudinally upon a line at right angles to a vertical plane halfway between the vertical planes of the two roll shafts; in other words, the upper and lower roll shafts, instead of being at right angles to the travel of the pipe, make complementary angles thereto of, e. g., 70° and 110°, the upper roll shaft having its left-hand end moved 20° forward, and the lower one having its corresponding end moved 20° backward from the right-angled position. Obviously, if the concavity in each roll was upon the arc of a circle, this nonparallelism of the upper and lower roll shafts would so distort the opening that a circular pipe could not pass through, and in order to make this opening or “pass” circular, when projected upon a plane at right angles to the pipe axis, and so suitable for the passage of circular pipe, it is necessary to make each concavity partially elliptical. Such “skewed rolls” operate at the same time to forward and to rotate the pipe, and were in common use, particularly for straightening purposes. It occurred to Fell that by putting circumferential beads or ribs upon the concave faces of these rolls he could get the desired result. Experiment demonstrated that
(Fig. 1, Isaacs & Speed.) (Fig. 3, Fell.)
Fell’s patent has 14 claims ; the bill alleged infringement of all. In the court below plaintiff relied upon nearly all, but in this court it practically confines itself to the first three; and we shall find it necessary to refer to the others only for tire salce of applying the differentiation test, in order to determine the meaning of the first three. They are as follows:
“1. In apparatus for rifling pipes or tubes, a pair of skewed rolls formed witA circumferential grooves or passes for the pipes or tubes having circum-ferentially extending rifling beads or ribs, substantially as described.
“2. In apparatus for rifling pipes or tubes, a pair of skewed rolls formed with circumferential grooves or passes for the pipes or tubes having circum-ferentially extending rifling beads or ribs, and means for positively rotating both of the rolls, substantially as described.
“3. In apparatus for rifling pipes or tubes, a pair of rolls having each a groove or pass for the pipes or tubes with circumferentially extending rifling beads or ribs, the two rolls having their axes crossing each other, and means for positively driving the said rolls, substantially as described.”
We see no substantial distinction between these claims. The element added by the second claim, “means for positively rotating both of the rolls,” is the statement of an element which, in some form, must be present to make the device independently operative; and the third claim merely uses different terms of description for the same rolls, so we may confine ourselves to the first claim.
The novelty of the broad result which Fell accomplished is not questioned; no one had ever before rifled pipe with a pair of skewed rolls carrying circumferential beads; upon this branch of the case, the only question is whether his solution required invention as distinguished from expert skill. There were in existence two classes of
We are satisfied that Fell made a distinct and valuable advance, and one beyond the limits of mechanical skill, and that his first claim is valid. No one of the pipe corrugating devices had an indenting bead upon a roll, which roll conveyed a double motion to the pipe. In ail these corrugating devices the parts which corresponded to, and were perhaps equivalent to, the indenting bead were carried upon a stationary pipe-inclosing framework. They were adaptations of the screw-cutting lathe. The idea that this indenting element could be carried circumferentially upon the surface of a roll is not disclosed by any of the corrugating patents, had not occurred to these inventors, and to us seems not obvious. If it did occur to one, it seems likely that the thought would be rejected because all these corrugating and indenting rollers pressed inwardly on a pressure line radial to the pipe; and, while the same thing would be true of one centrally located bead in the upper and lower rollers, this would produce only two grooves— not enough for efficient rifling — and as soon as the beads were put anywhere except in the center of the rolls the indenting pressure became tangential and not radial. That this apparently abnormal action would produce a satisfactory result in pipe of this character is due only to the fact that well-shaped grooves are not necessary, and that a slight indentation is sufficient.
The twist drill machine is, upon the whole, no closer. It has skewed feed rolls, carrying one circumferential bead, but this also, being central on the roll, is radial to the pipe; and — more important than that~it was not designed to, and did not operate to, make an indented groove in pipes or in anything else. The groove was made by other
The question of infringement requires an interpretation of the terms of the claim, which may or may not cover defendants’ structure, according as the interpretation is liberal or narrow. The defendants, having received an order for a large quantity of this rifled pipe from the same customer who had been buying from plaintiff, and on the condition that they would sell at a less price, first tried a modification of the Isaacs and Speed device, and then made some other changes, settling down upon and continuing to use a structure which, instead of the conventional roll, is built up from discs of different sizes rigidly attached to a shaft. This structure is shown in comparison with plaintiff’s by the following sketches made by plaintiff’s expert, and which, though not áccurate, are not essentially unfair (only the upper roll of the pair being shown):
It is obvious that if there was indenting pressure exercised vertically upon the upper and lower parts of .a hot and ductile pipe, the circular cross-section would be distorted and the sides would be bulged out horizontally, unless resistance against such distortion was provided at this
We see nowhere any reason for doubting that the defendants’ built-up structure comes within the broad and general definition of “a pair of skewed rolls with circumferential 'grooves having circumferential beads.” As the beads are the chiefly effective parts in the rifling operation, it can make no difference whether they are built up by discs, leaving the intervening parts open, or whether all parts were first cast solid and then the intervening parts cut away. The points which grip and indent and forward and rotate the pipe are just the same whether the body of the device is in solid or in skeleton form. The development of defendants’ structure demonstrates that it is “a pair of skewed rolls.” They took their ordinary sizing rolls with semicircular groove, cast ribs in the grooves, and skewed the axes. This device would not work, because the pass was not circular. The extremities of the groove- — what we have called the roll flanges — were, by the skewing, projected into the pass on the sides. These flanges being thus in the way, the defendants cut them off and substituted the guides, but by this change the rolls did not lose their general character; they continued to be skewed rolls, with a circumferential groove having circumferential beads. The defendants then cut away some of the face of the roll between the ribs, making the ribs higher, whereby it became apparent that they were, as they always had been, the edges of discs imbedded in the roll; but the structure did not, because its surface contour was thus changed, cease to be a roll carrying beads. It also
Are the side-supporting flanges of plaintiff’s rolls to be considered as performing a function essential to the device and as a feature which defendant must use, in form or by equivalent, before there is infringement? We think they are. It is true that the first claim does not call for these flanges in so many words, and that some of the other claims impliedly do so by calling for a “semielliptical groove or pass,” since the groove will not be completely semielliptical unless it is carried down to the central plane; but this term, “a pair of rolls,” used in this connection, necessarily means rolls that will roll pipe; and such a construction of them or their associated parts that the pipe will retain its general form is necessarily implied. However,, the very fact that this limitation as to the form of the roll is not expressed in the claim, but that any implication on that subject arises from the necessity that the device shall operate, indicates that no narrow rule of equivalency can be applied, and that when something else is substituted which was already a well-known means of performing the same function, and when its construction did not involve any invention, the thing so substituted is a mechanical equivalent, and infringement is not thereby escaped. We have already pointed out that these side flanges or extreme ends of the semielliptical groove have no function, except to resist the outward bulge of the pipe at this point. In a fair sense they are rolling guides; and the stationary guides used by defendants (shown in cross-section in the above sketch) have precisely the same function and perform it in the same way, except that the friction is sliding instead of rolling. Further, the Root patent, No. 180,-643, of August 1, 1876, had skewed rolls, in each of which the groove or pass was not semielliptical, but more shallow, and was*provided with central stationary guides or “keepers,” all arranged (as said in defendants’ brief) “just exactly as in defendants’ machine.” The defendants, therefore, have substituted for the roll flanges not only an equivalent, but a known equivalent; and this confirms the conclusion that infringement is not thereby avoided.
We find nothing upon the face of the patent requiring the claim to be limited to rolls which had these flanges attached to and integral with the rolls. It is true that neither by drawing nor specification does Fell suggest the performance of this function by stationary parts of the frame, but this is not necessary. In the absence of something clearly showing that the patentee did intend to have his grant confined to a specific form, a broad and generic claim may rightfully stand on a mere specific disclosure; and the invalidity of such a claim (if
Upon principle the matter seems clear. The statute requires that the specification should describe the invention, and that the patentee should specifically claim what is new. He cannot claim that which he has not substantially described; and it seems necessarily to follow that the idea — not “exactly as described” or “precisely as described,” but “substantially as described,” that is to say, “not varying in any vital way from the description” or “cither in the form shown or in its substantial equivalent” — is necessarily inherent in every claim. So, in Mitchell v. Tilghman, 86 U. S. (19 Wall.) 287, 391 (22 L. Ed. 125), referring to these words, it was said, “Words of such import, if not expressed in the claim, must be implied”; and again, in Hobbs v. Beach, 180 U. S. 383, 400, 21 Sup. Ct. 409, 416 (45 L. Ed. 586), speaking of the rule that these words refer us back to the specifications, that court says, “This rule, however, is equally applicable whether these words be used or not.” To say that these words must be implied, if not expressed, and to say that if expressed they import an otherwise nonexistent limitation, is to propound a dialectic paradox. We cannot lightly assume such a self-destructive contradiction in the law, and its seeming existence calls for a careful analysis of the apparently pertinent and authoritative cases.
in Seymour v. Osborne, 78 U. S. (11 Wall.) 516, 547 (20 L. Ed. 33), the question was whether the claims were void as being for an effect or a function, as, for example:
“Discharging the cut grain from a quadrant-shaped platform on which It falls as it is cut, by means of an automatic sweep-rake sweeping over the same, substantially as described.”
The court unquestionably placed reliance on this phrase, “substantially as described,” in reaching die conclusion that the claims were not functional, but it is not apparent that the court would have reached
“Words of such import, if not expressed in the claim, must be implied, else the patent in many cases would be invalid,” etc.
It seems quite clear that Mr. Justice Clifford could not have regarded his language in Seymour v: Osborne as laying down any rule of law to the effect that the actual presence of words, always constructively present, could have controlling importance. It is further to be noted that Seymour v. Osborne was decided in 1870, construing patents issued before 1865, and both issue and construction were before the Patent Office rule on the subject became finally settled as hereafter pointed out. In the Corn Planter Patent, 90 U. S. (23 Wall.) 181, 23 L. Ed. 161, the claim involved called for a combination of several parts “substantially as and for the purpose set forth.” From the discussion and disposition of the matter on pages 217, 218, and 219, it is apparent that the court construed the claim by reading into it what was necessary to make it an operative device of the general class and for the general purposes described; and it is difficult to see that any different course could have been taken if the concluding phrase had not been present in the claim. The remark that this phrase “throws us back to the specification for a qualification of the claim” seems rather casual, because clearly we will be thrown back to the specification for that purpose without any propelling aid from this clause. In Westinghouse v. Boyden, 170 U. S. 537, 18 Sup. Ct. 707, 42 L. Ed. 1136, the opinion was by Mr. Justice Brown, and his remark on this subject, on page 558, referred only to Seymour v. Osborne and to the Corn Planter Patent, omitting reference to Mitchell v. Tilghman. The question as to the proper construction of the claim had already been decided, and the presence of this phrase is only referred to as one of the “other facts which have a strong bearing in the same connection.” Just as Mr. Justice Clifford, when the matter was the second time before him, did not seem to be controlled by his comment the first time, so Mr. Justice Brown, going into the subject more thoroughly in Hobbs v. Beach, was unwilling to say that these words had any meaning.
In Hobbs v. Beach, supra, 180 U. S., at page 399, 21 Sup. Ct. at page 416 (45 L. Ed. 586), the court was confronted more squarely than ever before with the question of what force should be given to these words. This question was one of those upon which the two courts below had differed, and if they were held to import full limitation to the form of the specifications and drawings, there was no infringement. It seems a fair conclusion from the opinion that Justice Brown found himself embarrassed by what had been said in the three last above cases, on the one side, and on the other by Mitchell v. Tilghman and the inevitable logic of the situation, which compelled him. to say that the rule of going back to the specification for a qualification of the claim and for the elements of the combination “is equally applicable whether these words be used or not.” He, therefore,
Since Hobbs v. Beach, the Supreme Court has mentioned the question only once, so far as we find. In Singer v. Cramer, 192 U. S. 265, 284, 285, 24 Sup. Ct. 291, 48 L. Ed. 437, Mr. Justice White clearly indicates his supposition that the presence of this phrase in a claim did have a limiting effect; but what is said on this subject is without reference to Hobbs v. Beach, and is said after a discussion of the Patent Office proceedings and the limitations accepted therein had led him to the conclusion that the limited construction of the claim must be given. We do not think this case should be taken as a decision that the presence of the words necessarily imports a limitation. It may be usefully noted that in most, if not all, of those Supreme Court cases which give claims a broad construction and do not limit them to the form shown in the specification these words were present. See (e. g.) Winans v. Denmead, 56 U. S. (15 How.) 330, 14 L. Ed. 717; Clough v. Barker, 106 U. S. 166, 1 Sup. Ct. 188, 27 L. Ed. 134; Morley Co. v. Lancaster. 129 U. S. 263, 9 Sup. Ct. 299, 32 L. Ed. 715; Hoyt v. Horne, 145 U. S. 302, 12 Sup. Ct. 922, 36 L. Ed. 713.
In the decisions of this court, statements are to be found looking in both directions. In Stilwell Co. v. Eufala Co., 117 Fed. 410, 414, 54 C. C. A. 584, Judge Day was illustrating the rule that a claim should be construed by the specifications, and cited some of the above-named Supreme Court cases referring to “substantially as described.” So far as ‘the case indicates, he did not, in reaching the result, place any dependence upon that phrase; on the contrary, the defendant’s claim of uoninfriugement was overruled and the claims were given a construction sufficiently broad to cover defendant’s apparatus. In Sanders v. Hancock, 128 Fed. 434, 436, 63 C. C. A. 166, it was said of this phrase that it “carried into the claims the description of the specification.” Judge Severens again was only illustrating the propriety of a
“Whatever parts are named in the claim are of necessity intended to be named with reference to the specification and drawings. The reference cannot be made narrower by saying, ‘as described,’ nor broader by saying, ‘substantially.’ The words ‘substantially as described’ do not create this necessity for construction by the entire patent; they are only a formula of recognition of the rule.”2
“The practice of allowing claims for inventions which can only be distinguished from those previously invented or patented by the construction to be given to such words as ‘substantially as described.’ ‘as herein set forth,’ etc., cannot be too strongly condemned. The claim should state all the elements of the combination intended to be patented, and if the parts are the same in name and nuinber as in some prior machine, and the improvement consists in some modification of one or more of those parts, the claim should distinctly state that modification. It should not be concealed in ambiguous phrases. The words ‘substantially as described,’ and the like, have no fixed legal meaning. They may serve to expand or contract the claim. In general, they are employed for the latter purpose, so that a claim may appear to be broad upon its face which, in truth, by virtue of this mysterious phraseology, is exceedingly narrow. Sometimes they are added by inventors as a matter of course, by way of rounding off the claim, and have no particular meaning, and again, they are intended to signify that the patentee claims that which he describes and everything substantially like it. They are, at the best, ambiguous and dangerous phrases, and. however else they may be used, they must not be employed in the granting of letters patent to make a claim good that, without them, would be bad and unpatentable.
*520 “In conformity with the current practice of the office * * * the concluding words of the second and third claims should he ignored in considering the novelty of what is therein claimed.”
In 1872, Commissioner Thatcher said (In re Sperry, Com. Dec. 1872, p. 221):
“It has become the settled practice of the office to reject the clause as a limitation unless so placed as to obtain special significance.”
Again, Commissioner Deggett said of these words (In ré Collins Co., Com. Dec. 1872, p. 251):
“There is no objection whatever to their use where they make sense; but they have no legal effect either to enlarge or limit a claim properly drawn; and, so far as the grant of the patent is concerned, they should have no influence one way or the other. The claim should be sufficient in its terms either with or without them, because, either with or without them, its meaning and effect are to be determined in the courts by the light of the specification.”
The only exception 'to this rule — that the words are “inconsequential” — which seems to inhere in the situation is that if a patent was issued which contained two claims not distinguishable from each other save by the presence in one claim of this phrase, it might be the duty of the court, in giving effect to every part of the patent, to find in them
The foregoing considerations seem to us fully to justify the proposition with which this discussion is opened — that at least in all recent patents, and save in possible exceptional instances, the presence or absence of, this phrase is of no interpretative importance.
Limitation to Fell’s specific form of roll and differentiation from defendants’ three-disc structure are also thought to be found in the drawings, showing that practically all of the roll surface between the beads was in contact with or “hugged” the pipe surface, and in the specification referring to this portion of the roll surface as a “forming wall.” It appears to be a fact beyond dispute that this contact could not occur to anything like the extent shown in the drawings, unless the pipe material was too soft to be capable of rolling without a mandrel, and that in the practical operation of plaintiff’s device there is contact, if at all, only at one point midway between the beads; while the successful use of defendants’ device demonstrates that even so much contact is unnecessary. It is clear enough that the solicitor and the draftsman supposed that the rolls would operate in the specific way shown in this figure 3 of the drawing, and Fell is probably chargeable with the same supposition; but this comes to nothing more than an illustration and description of the supposed best form of device, with specific claims limited to that form, but accompanied by broad claims lacking such limitation. Claims 10 and 12, for example, cannot be effectively distinguished from the first three claims, except by the added limitation:
“Tlie walls of said passes being arranged to support the pipe or tube adjacent to {lie points of contact of the bending ribs or beads therewith and between such ribs or beads.”
The first three claims were originalty filed in the same form as when issued, except that there were added, by amendment, and by way of further description, the words “skewed” as to the rolls, “circumferential” as to the grooves or passes, “rifling” as to the beads or ribs, “for the pipes or tubes”' after “passes,” and “circumferentially” before “extending beads or ribs.” Every change except the last was obviously immaterial, because the added words were already inherent in the claims; and the limitation to “circumferentially” extending beads was inserted to distinguish from a reference having beads, or something similar, longitudinal on the rolls. With this limitation defendants are not concerned, because they use “circumferentially” extending beads or their equivalent. It is true that these three claims were once rejected on Denk, above described; but Fell not only declined to make any change whatever in them because of this rejection, but insisted that the examiner had “misunderstood the reference,” and that “applicant’s method of rifling pipe is believed to be broadly new. It is believed he is entitled to the broad claims presented.” He added in this letter:
“Furthermore * * * the reference does not show the walls of the passes arranged to support the article.”
This sentence has no possible effect to limit these three claims to passes which have walls so arranged, -not only because it is added as mere makeweight to the sufficient reasons already given, but also because it had special and appropriate application to the further claims which already contained this limitation, and which also had been rejected upon the Denk reference. When later these three claims and others were further rejected on reference to Fife’s patent for corrugating tubes, above described, Fell amended these by inserting the pro
“In fact, while claims 1, 2, and 3 have teen amended for the purpose of making them more clear, the pertinency of the reference to any of the claims is not clear.”
The remainder of his amendments made at this time, and in answer to this citation, refer to other claims, and cannot affect the first three. The claims were again rejected on reference to a patent which had rolls parallel with the pipe axis, and in which the spiral corrugations in the pipe were formed by the spiral corrugations in the mandrel. In answer to this reference Fell points out this distinction, and (again unnecessarily) inserts “skewed” with reference to his rolls. At the same time he made other comments, which might or might not have a limiting effect on other claims, but which could not affect these three.
Our review of these Patent Office proceedings satisfies us that they furnish no support for the theory of such limitation as will avoid infringement of claims 1, 2, and 3; their whole tendency is in the contrary direction.
The prior art has nothing closer than these earlier patents already discussed.
The decree below must be reversed, with costs in favor of appellant, and the usual decree for injunction and accounting entered as to claims 1, 2, and 3.
In addition to the cases cited in Hobbs v. Beach, the Supreme Court had referred to the subject in Brown v. Davis, 116 U. S. 237, 251, 6 Sup. Ct. 379, 29 L. Ed. 659, and in Pope v. Gormully, 144 U. S. 248, 253, 12 Sup. Ct. 641, 36 L. Ed. 423, but in neither of these cases is the matter of any particular importance to the decision, nor is it considered upon principle or authority, nor in connection with the fixed Patent Office practice. See, also Avery v. Case (C. C.) 139 Fed. 878, 882 (reversed, but not on this point, in 148 Fed. 214, 78 C. C. A. 110).
In this court, as in the Supreme Court, it is useful to observe that we have given a broad construction to claims containing the phrase and a narrow construction to those which did not, often apparently quite regardless of its presence.
Allen, Commissioner: This is a petition from the action of the primary examiner requiring the applicant to elect between two sets of claims on the ground that they are substantially the same. The two sets of claims are identical, except that one includes the words “substantially as described.” The question is whether a claim including these words is substantially different from the same claim omitting them. It is a fundamental rule that the claim of a patent must be construed by reference to the description accompanying it, and this is true whatever form the claim may take. Under section 4884, Revised Statutes, the specification is a part of the patent, and it is the rule that In determining the legal effect of an instrument all parts of it must he taken into consideration. In a patent the specification particularly describes the thing which the applicant has made, and the claim points out the part or parts of that thing which the applicant regards as new. Section 4888, Rev. Stats. It is unnecessary in the claim to say that it has reference to vrtiat is described, for that is obvious and necessarily follows from the provisions of the law itself.
As said by the Supreme Court in Hobbs v. Beach, 180 U. S. 383, 21 Sup. Ct. 409, 45 L. Ed. 586, in reference to the words “substantially as described”: “So in the corn-planter patent (23 Wall. 181, 218 [23 L. Ed. 161]), it was said that ‘this clause throws us back to the specification for a qualification of the claim, and the several elements of which tile combination is composed.’ This rule, however, is equally applicable whether these words be used or not.”
The petitioner in this case seems to think that the courts may give the claim a broader construction upon the question of equivalents if the words “substantially as described” are not included, and therefore argues that the claims are not ilie same in scope. Even if the words will be construed as having this effect, they do not themselves import any definite limitation into the claim. They leave that to the construction of the court in view of the facts brought to its attention in the particular case before it, and therefore to this extent they are vague and indefinite. If there are any particular limitations which the applicant wishes these words to import into the claim, ho should state them clearly and definitely, instead of attempting to include them by a blanketing clause at the end of the claim, the effect and meaning of which is, according to his own showing, very uncertain. The law requires that the pat-entee distinctly claim the features which he regards as his invention, and it is the duty of this office to require that the claims be made definite and cer
In Merrill v. Yoemans, 94 U. S. 568, 24 L. Ed. 235, the Supreme Court said: “The developed and improved condition of the patent law, and of the principles which govern the exclusive rights conferred by it, leave no excuse for ambiguous language or vague descriptions.”
As said by the Supreme Court in Burr v. Duryee, X Wall. 533, 17 L. Ed. 650: “Here we have the first experiment in the art of expansion by an equivocal claim, which may be construed a claim for the result or product of the machine, or for its principle or mode of operation. By this construction another inventor may be frightened from the course. But when challenged in a court of justice as too broad, the words ‘substantially as herein described,’ may be resorted to as qualifying this claim of a function, result, or principle, and arguing that as the specification described a machine, it meant nothing more.” '
The purpose here stated by the court seems to be the only one for attempting to limit a claim by the words “substantially as described,” instead of definitely stating the limitations intended to be included thereby. If the use of these words serves to accomplish this purpose, the result is to conceal- the seopé of the claim instead of making it clear, as required by law, and this is not permissible. If these words alone are regarded as sufficient to distinguish claims,- it would seem that a third set, including the words “identically as described,” should be allowed.
It is no more permissible on principle to refer to the description for some limitations which should be and are intended to be included in the claim than it is to refer to the description for all of the limitations, as by a claim covering “the device substantially as described.” Without regard to the effect ’ which the courts may in particular instances give to the words “substantially as described,” it must be held that this office in its treatment of claims must regard them as inconsequential. ■
The examiner’s requirement is right, and the petition is denied.
Tweuty-five years ago practically all patents used this “rounding off” phrase; now not one in ten (see any current number of Patent (Mice Gazette). It is not to be supposed that patents are growing broader as their number increases.
For further discussion either in effect reaching, or at least supporting, our conclusion, see Lake Shore R. R. Co. v. Carbrake Co., 110 U. S. 229, 235, 236, 4 Sup. Ct. 33, 28 L. Ed. 129; Boynton Co. v. Morris Co., 87 Fed. (C. C. A. 3) 225, 226, 227, 30 C. C. A. 617; Westinghouse Co. v. Stanley Co. (C. C. A. 1) 133 Fed. 167, 182, 68 C. C. A. 523; American Co. v. Hickmott Co. (C. C. A. 9) 142 Fed. 141, 146, 73 C. C. A. 359; Draper v. American Co. (C. C. A. 1) 161 Fed. 728, 731, 88 C. C. A. 588.