550 U.S. 398 | SCOTUS | 2007
KSR INTERNATIONAL CO., Petitioner,
v.
TELEFLEX INC. et al.
Supreme Court of United States.
*1733 James W. Dabney, for petitioner.
Thomas G. Hungar, for the United States as amicus curiae, by special leave of the Court, supporting the petitioner.
Thomas C. Goldstein, for respondents.
John F. Duffy, Fried, Frank, Harris, Shriver & Jacobson LLP, Of Counsel, James W. Dabney, Counsel of Record, New York, New York, Stephen S. Rabinowitz, Henry C. Lebowitz, Mitchell E. Epner, Darcy M. Goddard, Fried, Frank, Harris, Shriver & Jacobson LLP, New York, New York, Attorneys for Petitioner.
Kenneth C. Bass, III, Robert G. Sterne, Sterne, Kessler Goldstein & Fox P.L.L.C., Washington, DC, Rodger D. Young, Steven Susser, David Poirier, Young & Susser, P.C., Southfield, Thomas C. Goldstein, Counsel of Record, Michael A. O'Shea, Garreth A. Sarosi, Christopher R. Pudelski, Sarah C. Rispin, Akin Gump Strauss Hauer & Feld, LLP, Washington, DC, Samuel J. Haidle, David M. LaPrairie, Howard & Howard, Attorneys, P.C., Bloomfield Hills, MI, Tracy L. Casadio, *1734 Elizabeth H. Rader, Akin Gump Strauss Hauer & Feld, LLP, Los Angeles, CA, Brief for the Respondents.
Justice KENNEDY delivered the opinion of the Court.
Teleflex Incorporated and its subsidiary Technology Holding Companyboth referred to here as Teleflexsued KSR International Company for patent infringement. The patent at issue, United States Patent No. 6,237,565 B1, is entitled "Adjustable Pedal Assembly With Electronic Throttle Control." Supplemental App. 1. The patentee is Steven J. Engelgau, and the patent is referred to as "the Engelgau patent." Teleflex holds the exclusive license to the patent.
Claim 4 of the Engelgau patent describes a mechanism for combining an electronic sensor with an adjustable automobile pedal so the pedal's position can be transmitted to a computer that controls the throttle in the vehicle's engine. When Teleflex accused KSR of infringing the Engelgau patent by adding an electronic sensor to one of KSR's previously designed pedals, KSR countered that claim 4 was invalid under the Patent Act, 35 U.S.C. § 103, because its subject matter was obvious.
Section 103 forbids issuance of a patent when "the differences between the subject matter sought to be patented and the prior art are such that the subject matter as a whole would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains."
In Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 86 S. Ct. 684, 15 L. Ed. 2d 545 (1966), the Court set out a framework for applying the statutory language of § 103, language itself based on the logic of the earlier decision in Hotchkiss v. Greenwood, 11 How. 248, 13 L. Ed. 683 (1851), and its progeny. See 383 U.S., at 15-17, 86 S. Ct. 684. The analysis is objective:
"Under § 103, the scope and content of the prior art are to be determined; differences between the prior art and the claims at issue are to be ascertained; and the level of ordinary skill in the pertinent art resolved. Against this background the obviousness or nonobviousness of the subject matter is determined. Such secondary considerations as commercial success, long felt but unsolved needs, failure of others, etc., might be utilized to give light to the circumstances surrounding the origin of the subject matter sought to be patented." Id., at 17-18, 86 S. Ct. 684.
While the sequence of these questions might be reordered in any particular case, the factors continue to define the inquiry that controls. If a court, or patent examiner, conducts this analysis and concludes the claimed subject matter was obvious, the claim is invalid under § 103.
Seeking to resolve the question of obviousness with more uniformity and consistency, the Court of Appeals for the Federal Circuit has employed an approach referred to by the parties as the "teaching, suggestion, or motivation" test (TSM test), under which a patent claim is only proved obvious if "some motivation or suggestion to combine the prior art teachings" can be found in the prior art, the nature of the problem, or the knowledge of a person having ordinary skill in the art. See, e.g., Al-Site Corp. v. VSI Int'l, Inc., 174 F.3d 1308, 1323-1324 (C.A.Fed.1999). KSR challenges that *1735 test, or at least its application in this case. See 119 Fed.Appx. 282, 286-290 (C.A.Fed.2005). Because the Court of Appeals addressed the question of obviousness in a manner contrary to § 103 and our precedents, we granted certiorari, 547 U.S. ___, 126 S. Ct. 2965, 165 L. Ed. 2d 949 (2006). We now reverse.
I
A
In car engines without computer-controlled throttles, the accelerator pedal interacts with the throttle via cable or other mechanical link. The pedal arm acts as a lever rotating around a pivot point. In a cable-actuated throttle control the rotation caused by pushing down the pedal pulls a cable, which in turn pulls open valves in the carburetor or fuel injection unit. The wider the valves open, the more fuel and air are released, causing combustion to increase and the car to accelerate. When the driver takes his foot off the pedal, the opposite occurs as the cable is released and the valves slide closed.
In the 1990's it became more common to install computers in cars to control engine operation. Computer-controlled throttles open and close valves in response to electronic signals, not through force transferred from the pedal by a mechanical link. Constant, delicate adjustments of air and fuel mixture are possible. The computer's rapid processing of factors beyond the pedal's position improves fuel efficiency and engine performance.
For a computer-controlled throttle to respond to a driver's operation of the car, the computer must know what is happening with the pedal. A cable or mechanical link does not suffice for this purpose; at some point, an electronic sensor is necessary to translate the mechanical operation into digital data the computer can understand.
Before discussing sensors further we turn to the mechanical design of the pedal itself. In the traditional design a pedal can be pushed down or released but cannot have its position in the footwell adjusted by sliding the pedal forward or back. As a result, a driver who wishes to be closer or farther from the pedal must either reposition himself in the driver's seat or move the seat in some way. In cars with deep footwells these are imperfect solutions for drivers of smaller stature. To solve the problem, inventors, beginning in the 1970's, designed pedals that could be adjusted to change their location in the footwell. Important for this case are two adjustable pedals disclosed in U.S. Patent Nos. 5,010,782 (filed July 28, 1989) (Asano) and 5,460,061 (filed Sept. 17, 1993) (Redding). The Asano patent reveals a support structure that houses the pedal so that even when the pedal location is adjusted relative to the driver, one of the pedal's pivot points stays fixed. The pedal is also designed so that the force necessary to push the pedal down is the same regardless of adjustments to its location. The Redding patent reveals a different, sliding mechanism where both the pedal and the pivot point are adjusted.
We return to sensors. Well before Engelgau applied for his challenged patent, some inventors had obtained patents involving electronic pedal sensors for computer-controlled throttles. These inventions, such as the device disclosed in U.S. Patent No. 5,241,936 (filed Sept. 9, 1991) ('936), taught that it was preferable to detect the pedal's position in the pedal assembly, not in the engine. The '936 patent disclosed a pedal with an electronic sensor on a pivot point in the pedal assembly. U.S. Patent No. 5,063,811 (filed July 9, 1990) (Smith) taught that to prevent the *1736 wires connecting the sensor to the computer from chafing and wearing out, and to avoid grime and damage from the driver's foot, the sensor should be put on a fixed part of the pedal assembly rather than in or on the pedal's footpad.
In addition to patents for pedals with integrated sensors inventors obtained patents for self-contained modular sensors. A modular sensor is designed independently of a given pedal so that it can be taken off the shelf and attached to mechanical pedals of various sorts, enabling the pedals to be used in automobiles with computer-controlled throttles. One such sensor was disclosed in U.S. Patent No. 5,385,068 (filed Dec. 18, 1992) ('068). In 1994, Chevrolet manufactured a line of trucks using modular sensors "attached to the pedal support bracket, adjacent to the pedal and engaged with the pivot shaft about which the pedal rotates in operation." 298 F. Supp. 2d 581, 589 (E.D.Mich.2003).
The prior art contained patents involving the placement of sensors on adjustable pedals as well. For example, U.S. Patent No. 5,819,593 (filed Aug. 17, 1995) (Rixon) discloses an adjustable pedal assembly with an electronic sensor for detecting the pedal's position. In the Rixon pedal the sensor is located in the pedal footpad. The Rixon pedal was known to suffer from wire chafing when the pedal was depressed and released.
This short account of pedal and sensor technology leads to the instant case.
B
KSR, a Canadian company, manufactures and supplies auto parts, including pedal systems. Ford Motor Company hired KSR in 1998 to supply an adjustable pedal system for various lines of automobiles with cable-actuated throttle controls. KSR developed an adjustable mechanical pedal for Ford and obtained U.S. Patent No. 6,151,976 (filed July 16, 1999) ('976) for the design. In 2000, KSR was chosen by General Motors Corporation (GMC or GM) to supply adjustable pedal systems for Chevrolet and GMC light trucks that used engines with computer-controlled throttles. To make the '976 pedal compatible with the trucks, KSR merely took that design and added a modular sensor.
Teleflex is a rival to KSR in the design and manufacture of adjustable pedals. As noted, it is the exclusive licensee of the Engelgau patent. Engelgau filed the patent application on August 22, 2000 as a continuation of a previous application for U.S. Patent No. 6,109,241, which was filed on January 26, 1999. He has sworn he invented the patent's subject matter on February 14, 1998. The Engelgau patent discloses an adjustable electronic pedal described in the specification as a "simplified vehicle control pedal assembly that is less expensive, and which uses fewer parts and is easier to package within the vehicle." Engelgau, col. 2, lines 2-5, Supplemental App. 6. Claim 4 of the patent, at issue here, describes:
"A vehicle control pedal apparatus comprising:
a support adapted to be mounted to a vehicle structure;
an adjustable pedal assembly having a pedal arm moveable in for[e] and aft directions with respect to said support;
a pivot for pivotally supporting said adjustable pedal assembly with respect to said support and defining a pivot axis; and
an electronic control attached to said support for controlling a vehicle system;
said apparatus characterized by said electronic control being responsive to said pivot for providing a signal that corresponds to pedal arm position as said pedal arm pivots about said pivot *1737 axis between rest and applied positions wherein the position of said pivot remains constant while said pedal arm moves in fore and aft directions with respect to said pivot." Id., col. 6, lines 17-36, Supplemental App. 8 (diagram numbers omitted).
We agree with the District Court that the claim discloses "a position-adjustable pedal assembly with an electronic pedal position sensor attached to the support member of the pedal assembly. Attaching the sensor to the support member allows the sensor to remain in a fixed position while the driver adjusts the pedal." 298 F.Supp.2d, at 586-587.
Before issuing the Engelgau patent the U.S. Patent and Trademark Office (PTO) rejected one of the patent claims that was similar to, but broader than, the present claim 4. The claim did not include the requirement that the sensor be placed on a fixed pivot point. The PTO concluded the claim was an obvious combination of the prior art disclosed in Redding and Smith, explaining:
"`Since the prior ar[t] references are from the field of endeavor, the purpose disclosed . . . would have been recognized in the pertinent art of Redding. Therefore it would have been obvious. . . to provide the device of Redding with the . . . means attached to a support member as taught by Smith.'" Id., at 595.
In other words Redding provided an example of an adjustable pedal and Smith explained how to mount a sensor on a pedal's support structure, and the rejected patent claim merely put these two teachings together.
Although the broader claim was rejected, claim 4 was later allowed because it included the limitation of a fixed pivot point, which distinguished the design from Redding's. Ibid. Engelgau had not included Asano among the prior art references, and Asano was not mentioned in the patent's prosecution. Thus, the PTO did not have before it an adjustable pedal with a fixed pivot point. The patent issued on May 29, 2001 and was assigned to Teleflex.
Upon learning of KSR's design for GM, Teleflex sent a warning letter informing KSR that its proposal would violate the Engelgau patent. "`Teleflex believes that any supplier of a product that combines an adjustable pedal with an electronic throttle control necessarily employs technology covered by one or more'" of Teleflex's patents. Id., at 585. KSR refused to enter a royalty arrangement with Teleflex; so Teleflex sued for infringement, asserting KSR's pedal infringed the Engelgau patent and two other patents. Ibid. Teleflex later abandoned its claims regarding the other patents and dedicated the patents to the public. The remaining contention was that KSR's pedal system for GM infringed claim 4 of the Engelgau patent. Teleflex has not argued that the other three claims of the patent are infringed by KSR's pedal, nor has Teleflex argued that the mechanical adjustable pedal designed by KSR for Ford infringed any of its patents.
C
The District Court granted summary judgment in KSR's favor. After reviewing the pertinent history of pedal design, the scope of the Engelgau patent, and the relevant prior art, the court considered the validity of the contested claim. By direction of 35 U.S.C. § 282, an issued patent is presumed valid. The District Court applied Graham's framework to determine whether under summary-judgment standards KSR had overcome the presumption and demonstrated that claim 4 was obvious in light of the prior art in existence when *1738 the claimed subject matter was invented. See § 102(a).
The District Court determined, in light of the expert testimony and the parties' stipulations, that the level of ordinary skill in pedal design was "`an undergraduate degree in mechanical engineering (or an equivalent amount of industry experience) [and] familiarity with pedal control systems for vehicles.'" 298 F.Supp.2d, at 590. The court then set forth the relevant prior art, including the patents and pedal designs described above.
Following Graham's direction, the court compared the teachings of the prior art to the claims of Engelgau. It found "little difference." 298 F.Supp.2d, at 590. Asano taught everything contained in claim 4 except the use of a sensor to detect the pedal's position and transmit it to the computer controlling the throttle. That additional aspect was revealed in sources such as the '068 patent and the sensors used by Chevrolet.
Under the controlling cases from the Court of Appeals for the Federal Circuit, however, the District Court was not permitted to stop there. The court was required also to apply the TSM test. The District Court held KSR had satisfied the test. It reasoned (1) the state of the industry would lead inevitably to combinations of electronic sensors and adjustable pedals, (2) Rixon provided the basis for these developments, and (3) Smith taught a solution to the wire chafing problems in Rixon, namely locating the sensor on the fixed structure of the pedal. This could lead to the combination of Asano, or a pedal like it, with a pedal position sensor.
The conclusion that the Engelgau design was obvious was supported, in the District Court's view, by the PTO's rejection of the broader version of claim 4. Had Engelgau included Asano in his patent application, it reasoned, the PTO would have found claim 4 to be an obvious combination of Asano and Smith, as it had found the broader version an obvious combination of Redding and Smith. As a final matter, the District Court held that the secondary factor of Teleflex's commercial success with pedals based on Engelgau's design did not alter its conclusion. The District Court granted summary judgment for KSR.
With principal reliance on the TSM test, the Court of Appeals reversed. It ruled the District Court had not been strict enough in applying the test, having failed to make "`finding[s] as to the specific understanding or principle within the knowledge of a skilled artisan that would have motivated one with no knowledge of [the] invention' . . . to attach an electronic control to the support bracket of the Asano assembly." 119 Fed.Appx., at 288 (brackets in original) (quoting In re Kotzab, 217 F.3d 1365, 1371 (C.A.Fed.2000)). The Court of Appeals held that the District Court was incorrect that the nature of the problem to be solved satisfied this requirement because unless the "prior art references address[ed] the precise problem that the patentee was trying to solve," the problem would not motivate an inventor to look at those references. 119 Fed.Appx., at 288.
Here, the Court of Appeals found, the Asano pedal was designed to solve the "`constant ratio problem'"that is, to ensure that the force required to depress the pedal is the same no matter how the pedal is adjustedwhereas Engelgau sought to provide a simpler, smaller, cheaper adjustable electronic pedal. Ibid. As for Rixon, the court explained, that pedal suffered from the problem of wire chafing but was not designed to solve it. In the court's view Rixon did not teach anything helpful to Engelgau's purpose. Smith, in turn, did not relate to adjustable pedals and did not "necessarily go to the issue of motivation *1739 to attach the electronic control on the support bracket of the pedal assembly." Ibid. When the patents were interpreted in this way, the Court of Appeals held, they would not have led a person of ordinary skill to put a sensor on the sort of pedal described in Asano.
That it might have been obvious to try the combination of Asano and a sensor was likewise irrelevant, in the court's view, because "`"[o]bvious to try" has long been held not to constitute obviousness.'" Id., at 289 (quoting In re Deuel, 51 F.3d 1552, 1559 (C.A.Fed.1995)).
The Court of Appeals also faulted the District Court's consideration of the PTO's rejection of the broader version of claim 4. The District Court's role, the Court of Appeals explained, was not to speculate regarding what the PTO might have done had the Engelgau patent mentioned Asano. Rather, the court held, the District Court was obliged first to presume that the issued patent was valid and then to render its own independent judgment of obviousness based on a review of the prior art. The fact that the PTO had rejected the broader version of claim 4, the Court of Appeals said, had no place in that analysis.
The Court of Appeals further held that genuine issues of material fact precluded summary judgment. Teleflex had proffered statements from one expert that claim 4 "`was a simple, elegant, and novel combination of features,'" 119 Fed.Appx., at 290, compared to Rixon, and from another expert that claim 4 was nonobvious because, unlike in Rixon, the sensor was mounted on the support bracket rather than the pedal itself. This evidence, the court concluded, sufficed to require a trial.
II
A
We begin by rejecting the rigid approach of the Court of Appeals. Throughout this Court's engagement with the question of obviousness, our cases have set forth an expansive and flexible approach inconsistent with the way the Court of Appeals applied its TSM test here. To be sure, Graham recognized the need for "uniformity and definiteness." 383 U.S., at 18, 86 S. Ct. 684. Yet the principles laid down in Graham reaffirmed the "functional approach" of Hotchkiss, 11 How. 248, 13 L. Ed. 683. See 383 U.S., at 12, 86 S. Ct. 684. To this end, Graham set forth a broad inquiry and invited courts, where appropriate, to look at any secondary considerations that would prove instructive. Id., at 17, 86 S. Ct. 684.
Neither the enactment of § 103 nor the analysis in Graham disturbed this Court's earlier instructions concerning the need for caution in granting a patent based on the combination of elements found in the prior art. For over a half century, the Court has held that a "patent for a combination which only unites old elements with no change in their respective functions . . . obviously withdraws what is already known into the field of its monopoly and diminishes the resources available to skillful men." Great Atlantic & Pacific Tea Co. v. Supermarket Equipment Corp., 340 U.S. 147, 152, 71 S. Ct. 127, 95 L. Ed. 162 (1950). This is a principal reason for declining to allow patents for what is obvious. The combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results. Three cases decided after Graham illustrate the application of this doctrine.
In United States v. Adams, 383 U.S. 39, 40, 86 S. Ct. 708, 15 L. Ed. 2d 572 (1966), a companion case to Graham, the Court considered the obviousness of a "wet battery" that varied from prior designs in two ways: *1740 It contained water, rather than the acids conventionally employed in storage batteries; and its electrodes were magnesium and cuprous chloride, rather than zinc and silver chloride. The Court recognized that when a patent claims a structure already known in the prior art that is altered by the mere substitution of one element for another known in the field, the combination must do more than yield a predictable result. 383 U.S., at 50-51, 86 S. Ct. 708. It nevertheless rejected the Government's claim that Adams's battery was obvious. The Court relied upon the corollary principle that when the prior art teaches away from combining certain known elements, discovery of a successful means of combining them is more likely to be nonobvious. Id., at 51-52, 86 S. Ct. 708. When Adams designed his battery, the prior art warned that risks were involved in using the types of electrodes he employed. The fact that the elements worked together in an unexpected and fruitful manner supported the conclusion that Adams's design was not obvious to those skilled in the art.
In Anderson's-Black Rock, Inc. v. Pavement Salvage Co., 396 U.S. 57, 90 S. Ct. 305, 24 L. Ed. 2d 258 (1969), the Court elaborated on this approach. The subject matter of the patent before the Court was a device combining two pre-existing elements: a radiant-heat burner and a paving machine. The device, the Court concluded, did not create some new synergy: The radiant-heat burner functioned just as a burner was expected to function; and the paving machine did the same. The two in combination did no more than they would in separate, sequential operation. Id., at 60-62, 90 S. Ct. 305. In those circumstances, "while the combination of old elements performed a useful function, it added nothing to the nature and quality of the radiant-heat burner already patented," and the patent failed under § 103. Id., at 62, 90 S. Ct. 305 (footnote omitted).
Finally, in Sakraida v. Ag Pro, Inc., 425 U.S. 273, 96 S. Ct. 1532, 47 L. Ed. 2d 784 (1976), the Court derived from the precedents the conclusion that when a patent "simply arranges old elements with each performing the same function it had been known to perform" and yields no more than one would expect from such an arrangement, the combination is obvious. Id., at 282, 96 S. Ct. 1532.
The principles underlying these cases are instructive when the question is whether a patent claiming the combination of elements of prior art is obvious. When a work is available in one field of endeavor, design incentives and other market forces can prompt variations of it, either in the same field or a different one. If a person of ordinary skill can implement a predictable variation, § 103 likely bars its patentability. For the same reason, if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill. Sakraida and Anderson's-Black Rock are illustrativea court must ask whether the improvement is more than the predictable use of prior art elements according to their established functions.
Following these principles may be more difficult in other cases than it is here because the claimed subject matter may involve more than the simple substitution of one known element for another or the mere application of a known technique to a piece of prior art ready for the improvement. Often, it will be necessary for a court to look to interrelated teachings of multiple patents; the effects of demands known to the design community or present in the marketplace; and the background knowledge possessed by a person having *1741 ordinary skill in the art, all in order to determine whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue. To facilitate review, this analysis should be made explicit. See In re Kahn, 441 F.3d 977, 988 (C.A.Fed.2006) ("[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness"). As our precedents make clear, however, the analysis need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.
B
When it first established the requirement of demonstrating a teaching, suggestion, or motivation to combine known elements in order to show that the combination is obvious, the Court of Customs and Patent Appeals captured a helpful insight. See Application of Bergel, 48 C.C.P.A. 1102, 292 F.2d 955, 956-957 (1961). As is clear from cases such as Adams, a patent composed of several elements is not proved obvious merely by demonstrating that each of its elements was, independently, known in the prior art. Although common sense directs one to look with care at a patent application that claims as innovation the combination of two known devices according to their established functions, it can be important to identify a reason that would have prompted a person of ordinary skill in the relevant field to combine the elements in the way the claimed new invention does. This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.
Helpful insights, however, need not become rigid and mandatory formulas; and when it is so applied, the TSM test is incompatible with our precedents. The obviousness analysis cannot be confined by a formalistic conception of the words teaching, suggestion, and motivation, or by overemphasis on the importance of published articles and the explicit content of issued patents. The diversity of inventive pursuits and of modern technology counsels against limiting the analysis in this way. In many fields it may be that there is little discussion of obvious techniques or combinations, and it often may be the case that market demand, rather than scientific literature, will drive design trends. Granting patent protection to advances that would occur in the ordinary course without real innovation retards progress and may, in the case of patents combining previously known elements, deprive prior inventions of their value or utility.
In the years since the Court of Customs and Patent Appeals set forth the essence of the TSM test, the Court of Appeals no doubt has applied the test in accord with these principles in many cases. There is no necessary inconsistency between the idea underlying the TSM test and the Graham analysis. But when a court transforms the general principle into a rigid rule that limits the obviousness inquiry, as the Court of Appeals did here, it errs.
C
The flaws in the analysis of the Court of Appeals relate for the most part to the court's narrow conception of the obviousness inquiry reflected in its application of the TSM test. In determining whether the subject matter of a patent claim is obvious, neither the particular motivation nor the avowed purpose of the *1742 patentee controls. What matters is the objective reach of the claim. If the claim extends to what is obvious, it is invalid under § 103. One of the ways in which a patent's subject matter can be proved obvious is by noting that there existed at the time of invention a known problem for which there was an obvious solution encompassed by the patent's claims.
The first error of the Court of Appeals in this case was to foreclose this reasoning by holding that courts and patent examiners should look only to the problem the patentee was trying to solve. 119 Fed.Appx., at 288. The Court of Appeals failed to recognize that the problem motivating the patentee may be only one of many addressed by the patent's subject matter. The question is not whether the combination was obvious to the patentee but whether the combination was obvious to a person with ordinary skill in the art. Under the correct analysis, any need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed.
The second error of the Court of Appeals lay in its assumption that a person of ordinary skill attempting to solve a problem will be led only to those elements of prior art designed to solve the same problem. Ibid. The primary purpose of Asano was solving the constant ratio problem; so, the court concluded, an inventor considering how to put a sensor on an adjustable pedal would have no reason to consider putting it on the Asano pedal. Ibid. Common sense teaches, however, that familiar items may have obvious uses beyond their primary purposes, and in many cases a person of ordinary skill will be able to fit the teachings of multiple patents together like pieces of a puzzle. Regardless of Asano's primary purpose, the design provided an obvious example of an adjustable pedal with a fixed pivot point; and the prior art was replete with patents indicating that a fixed pivot point was an ideal mount for a sensor. The idea that a designer hoping to make an adjustable electronic pedal would ignore Asano because Asano was designed to solve the constant ratio problem makes little sense. A person of ordinary skill is also a person of ordinary creativity, not an automaton.
The same constricted analysis led the Court of Appeals to conclude, in error, that a patent claim cannot be proved obvious merely by showing that the combination of elements was "obvious to try." Id., at 289 (internal quotation marks omitted). When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp. If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense. In that instance the fact that a combination was obvious to try might show that it was obvious under § 103.
The Court of Appeals, finally, drew the wrong conclusion from the risk of courts and patent examiners falling prey to hindsight bias. A factfinder should be aware, of course, of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning. See Graham, 383 U.S., at 36, 86 S. Ct. 684 (warning against a "temptation to read into the prior art the teachings of the invention in issue" and instructing courts to "`guard against slipping into the use of hindsight'" (quoting Monroe Auto Equipment Co. v. Heckethorn Mfg. & Supply Co., 332 F.2d 406, 412 (C.A.6 1964))). Rigid preventative rules that deny factfinders recourse to common sense, however, are *1743 neither necessary under our case law nor consistent with it.
We note the Court of Appeals has since elaborated a broader conception of the TSM test than was applied in the instant matter. See, e.g., DyStar Textilfarben GmbH & Co. Deutschland KG v. C.H. Patrick Co., 464 F.3d 1356, 1367 (2006) ("Our suggestion test is in actuality quite flexible and not only permits, but requires, consideration of common knowledge and common sense"); Alza Corp. v. Mylan Labs., Inc., 464 F.3d 1286, 1291 (2006) ("There is flexibility in our obviousness jurisprudence because a motivation may be found implicitly in the prior art. We do not have a rigid test that requires an actual teaching to combine ..."). Those decisions, of course, are not now before us and do not correct the errors of law made by the Court of Appeals in this case. The extent to which they may describe an analysis more consistent with our earlier precedents and our decision here is a matter for the Court of Appeals to consider in its future cases. What we hold is that the fundamental misunderstandings identified above led the Court of Appeals in this case to apply a test inconsistent with our patent law decisions.
III
When we apply the standards we have explained to the instant facts, claim 4 must be found obvious. We agree with and adopt the District Court's recitation of the relevant prior art and its determination of the level of ordinary skill in the field. As did the District Court, we see little difference between the teachings of Asano and Smith and the adjustable electronic pedal disclosed in claim 4 of the Engelgau patent. A person having ordinary skill in the art could have combined Asano with a pedal position sensor in a fashion encompassed by claim 4, and would have seen the benefits of doing so.
A
Teleflex argues in passing that the Asano pedal cannot be combined with a sensor in the manner described by claim 4 because of the design of Asano's pivot mechanisms. See Brief for Respondents 48-49, and n. 17. Therefore, Teleflex reasons, even if adding a sensor to Asano was obvious, that does not establish that claim 4 encompasses obvious subject matter. This argument was not, however, raised before the District Court. There Teleflex was content to assert only that the problem motivating the invention claimed by the Engelgau patent would not lead to the solution of combining of Asano with a sensor. See Teleflex's Response to KSR's Motion for Summary Judgment of Invalidity in No. 02-74586 (ED Mich.), pp. 18-20, App. 144a-146a. It is also unclear whether the current argument was raised before the Court of Appeals, where Teleflex advanced the nonspecific, conclusory contention that combining Asano with a sensor would not satisfy the limitations of claim 4. See Brief for Plaintiffs-Appellants in No. 04-1152 (CA Fed.), pp. 42-44. Teleflex's own expert declarations, moreover, do not support the point Teleflex now raises. See Declaration of Clark J. Radcliffe, Ph.D., Supplemental App. 204-207; Declaration of Timothy L. Andresen, id., at 208-210. The only statement in either declaration that might bear on the argument is found in the Radcliffe declaration:
"Asano ... and Rixon ... are complex mechanical linkage-based devices that are expensive to produce and assemble and difficult to package. It is exactly these difficulties with prior art designs that [Engelgau] resolves. The use of an adjustable pedal with a single pivot reflecting pedal position combined with an electronic control mounted between the *1744 support and the adjustment assembly at that pivot was a simple, elegant, and novel combination of features in the Engelgau '565 patent." Id., at 206, ¶ 16.
Read in the context of the declaration as a whole this is best interpreted to mean that Asano could not be used to solve "[t]he problem addressed by Engelgau '565[:] to provide a less expensive, more quickly assembled, and smaller package adjustable pedal assembly with electronic control." Id., at 205, ¶ 10.
The District Court found that combining Asano with a pivot-mounted pedal position sensor fell within the scope of claim 4. 298 F.Supp.2d, at 592-593. Given the sigificance of that finding to the District Court's judgment, it is apparent that Teleflex would have made clearer challenges to it if it intended to preserve this claim. In light of Teleflex's failure to raise the argument in a clear fashion, and the silence of the Court of Appeals on the issue, we take the District Court's conclusion on the point to be correct.
B
The District Court was correct to conclude that, as of the time Engelgau designed the subject matter in claim 4, it was obvious to a person of ordinary skill to combine Asano with a pivot-mounted pedal position sensor. There then existed a marketplace that created a strong incentive to convert mechanical pedals to electronic pedals, and the prior art taught a number of methods for achieving this advance. The Court of Appeals considered the issue too narrowly by, in effect, asking whether a pedal designer writing on a blank slate would have chosen both Asano and a modular sensor similar to the ones used in the Chevrolet truckline and disclosed in the '068 patent. The District Court employed this narrow inquiry as well, though it reached the correct result nevertheless. The proper question to have asked was whether a pedal designer of ordinary skill, facing the wide range of needs created by developments in the field of endeavor, would have seen a benefit to upgrading Asano with a sensor.
In automotive design, as in many other fields, the interaction of multiple components means that changing one component often requires the others to be modified as well. Technological developments made it clear that engines using computer-controlled throttles would become standard. As a result, designers might have decided to design new pedals from scratch; but they also would have had reason to make pre-existing pedals work with the new engines. Indeed, upgrading its own pre-existing model led KSR to design the pedal now accused of infringing the Engelgau patent.
For a designer starting with Asano, the question was where to attach the sensor. The consequent legal question, then, is whether a pedal designer of ordinary skill starting with Asano would have found it obvious to put the sensor on a fixed pivot point. The prior art discussed above leads us to the conclusion that attaching the sensor where both KSR and Engelgau put it would have been obvious to a person of ordinary skill.
The '936 patent taught the utility of putting the sensor on the pedal device, not in the engine. Smith, in turn, explained to put the sensor not on the pedal's footpad but instead on its support structure. And from the known wire-chafing problems of Rixon, and Smith's teaching that "the pedal assemblies must not precipitate any motion in the connecting wires," Smith, col. 1, lines 35-37, Supplemental App. 274, the designer would know to place the sensor on a nonmoving part of the pedal structure. The most obvious nonmoving point on the structure from which a sensor can *1745 easily detect the pedal's position is a pivot point. The designer, accordingly, would follow Smith in mounting the sensor on a pivot, thereby designing an adjustable electronic pedal covered by claim 4.
Just as it was possible to begin with the objective to upgrade Asano to work with a computer-controlled throttle, so too was it possible to take an adjustable electronic pedal like Rixon and seek an improvement that would avoid the wire-chafing problem. Following similar steps to those just explained, a designer would learn from Smith to avoid sensor movement and would come, thereby, to Asano because Asano disclosed an adjustable pedal with a fixed pivot.
Teleflex indirectly argues that the prior art taught away from attaching a sensor to Asano because Asano in its view is bulky, complex, and expensive. The only evidence Teleflex marshals in support of this argument, however, is the Radcliffe declaration, which merely indicates that Asano would not have solved Engelgau's goal of making a small, simple, and inexpensive pedal. What the declaration does not indicate is that Asano was somehow so flawed that there was no reason to upgrade it, or pedals like it, to be compatible with modern engines. Indeed, Teleflex's own declarations refute this conclusion. Dr. Radcliffe states that Rixon suffered from the same bulk and complexity as did Asano. See id., at 206. Teleflex's other expert, however, explained that Rixon was itself designed by adding a sensor to a pre-existing mechanical pedal. See id., at 209. If Rixon's base pedal was not too flawed to upgrade, then Dr. Radcliffe's declaration does not show Asano was either. Teleflex may have made a plausible argument that Asano is inefficient as compared to Engelgau's preferred embodiment, but to judge Asano against Engelgau would be to engage in the very hindsight bias Teleflex rightly urges must be avoided. Accordingly, Teleflex has not shown anything in the prior art that taught away from the use of Asano.
Like the District Court, finally, we conclude Teleflex has shown no secondary factors to dislodge the determination that claim 4 is obvious. Proper application of Graham and our other precedents to these facts therefore leads to the conclusion that claim 4 encompassed obvious subject matter. As a result, the claim fails to meet the requirement of § 103.
We need not reach the question whether the failure to disclose Asano during the prosecution of Engelgau voids the presumption of validity given to issued patents, for claim 4 is obvious despite the presumption. We nevertheless think it appropriate to note that the rationale underlying the presumptionthat the PTO, in its expertise, has approved the claim seems much diminished here.
IV
A separate ground the Court of Appeals gave for reversing the order for summary judgment was the existence of a dispute over an issue of material fact. We disagree with the Court of Appeals on this point as well. To the extent the court understood the Graham approach to exclude the possibility of summary judgment when an expert provides a conclusory affidavit addressing the question of obviousness, it misunderstood the role expert testimony plays in the analysis. In considering summary judgment on that question the district court can and should take into account expert testimony, which may resolve or keep open certain questions of fact. That is not the end of the issue, however. The ultimate judgment of obviousness is a legal determination. Graham, 383 U.S., at 17, 86 S. Ct. 684. Where, as here, the content of the prior art, the scope of the patent *1746 claim, and the level of ordinary skill in the art are not in material dispute, and the obviousness of the claim is apparent in light of these factors, summary judgment is appropriate. Nothing in the declarations proffered by Teleflex prevented the District Court from reaching the careful conclusions underlying its order for summary judgment in this case.
* * *
We build and create by bringing to the tangible and palpable reality around us new works based on instinct, simple logic, ordinary inferences, extraordinary ideas, and sometimes even genius. These advances, once part of our shared knowledge, define a new threshold from which innovation starts once more. And as progress beginning from higher levels of achievement is expected in the normal course, the results of ordinary innovation are not the subject of exclusive rights under the patent laws. Were it otherwise patents might stifle, rather than promote, the progress of useful arts. See U.S. Const., Art. I, § 8, cl. 8. These premises led to the bar on patents claiming obvious subject matter established in Hotchkiss and codified in § 103. Application of the bar must not be confined within a test or formulation too constrained to serve its purpose.
KSR provided convincing evidence that mounting a modular sensor on a fixed pivot point of the Asano pedal was a design step well within the grasp of a person of ordinary skill in the relevant art. Its arguments, and the record, demonstrate that claim 4 of the Engelgau patent is obvious. In rejecting the District Court's rulings, the Court of Appeals analyzed the issue in a narrow, rigid manner inconsistent with § 103 and our precedents. The judgment of the Court of Appeals is reversed, and the case remanded for further proceedings consistent with this opinion.
It is so ordered.
