Lead Opinion
This appeal is from an order of the United States District Court for the District of New Jersey (Judge John F. Gerry presiding) holding H.A. Jones Company, Inc. and Erico Jones Company (hereinafter collectively Jones) in civil contempt of court for violation of the terms of a consent decree entered in a patent infringement suit. On April 30, 1979, a predecessor of KSM Fastening Systems, Inc., brought suit against Jones alleging infringement of U.S. Patent No. 3,738,217, which claims a particular hanger assembly or anchor for securing refractory linings to furnace walls (KSM’s INSULTWIST), by reason of Jones’ manufacture and sale of a device of that type (Jones’ THERMAL-LOCK device). Pursuant to a settlement agreement between the parties, which was entered as a consent decree on March 6, 1980, Jones acknowledged the validity of the KSM patent, admitted infringement thereof by its THER
Jones subsequently put out a modified refractory anchor (ULTRA-LOK I) and on September 22, 1981, KSM moved the court to punish Jones for contempt for violation of the injunction. On July 17, 1984, the court found Jones in contempt by reason of Jones’ manufacture and sale of the ULTRA-LOK I device and another model, ULTRA-LOK II, which Jones began marketing in late 1983 or early 1984. This appeal followed.
Under the standard we conclude is appropriate, the judgment must be set aside as a matter of law because of the refusal of the district court to consider whether the Jones ULTRA-LOK devices infringed the claims of the ’217 patent. Moreover, the question whether contempt proceedings involving the ULTRA-LOK devices are appropriate must also be reexamined. Therefore, upon remand, the district court is directed to reconsider whether, under the standard set forth herein, infringement with respect to the ULTRA-LOK devices should be tested in contempt proceedings.
I.
Under the Patent Act of 1952, as part of the relief available to a prevailing patent owner, 35 U.S.C. § 283 provides:
The several courts having jurisdiction of cases under this title may grant injunctions in accordance with the principles of equity to prevent the violation of any right secured by patent, on such terms as the court deems reasonable.
While the grant of injunctive authority is clearly in discretionary terms, Roche Products, Inc. v. Bolar Pharmaceutical Co., Inc.,
Having enjoined the infringer, a patent owner who is confronted with another possible infringement by that party in the form of a modified device will very likely seek to invoke the power of the court to punish the adjudged infringer for contempt in violating the court’s injunctive order. While a patent owner, in such circumstances, could institute a separate suit to enjoin the modified device, the advantages of proceeding on a motion to hold his adversary in contempt are substantial. The adjudged infringer is already under the jurisdiction of the court and may be summoned to appear to respond on the merits, the contempt motion being merely part of the original action. Leman v. Krentler-Arnold Hinge Last Co.,
A civil contempt proceeding for violation of an injunction issued after patent litigation, while primarily for the benefit of the patent owner, neverthеless, involves also the concept of an affront to the court for failure to obey its order. As explained in American Foundry & Manufacturing Co. v. Josam Manufacturing Co.,
*1525 A decision adjudging infringement necessarily finds the particular accused device to be within the valid boundary of the patent. The decree usually carries a prohibition against further infringement — not as to any and every possible infringement, but as to the particular device found to be infringement and as to all other devices which are merely “colorable” changes of the infringing one or of the patent. This limitation of the effect of such a decree is occasioned somewhat by the indefinite character of the boundaries of a patent, but more by the character of the remedy — summary contempt proceedings — used to enforce such provisions of a decree. This is merely an application to рatent injunction contempt proceedings of the general rule as to all civil contempt proceedings. Oriel v. Russell,278 U.S. 358 , 365,49 S.Ct. 173 [175]73 L.Ed. 419 ; City of Campbell v. Arkansas-Missouri Power Co., 65 Fed.(2d) 425, 428 (C.C.A.8). That rule was stated by this Court to be that “when it is doubtful whether a decree of injunction has been violated, a court is not justified in punishing for contempt, either criminal or civil, for the reason that no one can say with any degree of certainty that the authority of the court needs vindication or that the aggrieved party is entitled to remedial punishment” City of Campbell v. Arkansas-Missouri Power Co., 65 Fed.(2d) 425, 427, 428.
In view of these and other considerations to be discussed, where the patent owner seeks to enforce an injunction against an enjoined infringer by reason of a manufacture which was not the subject of the original litigation, the courts have been uniform in exercising restraint in affording the patent owner the benefit of contempt proceedings.
In MAC Corp. of America v. Williams Patent Crusher & Pulverizer Co.,
Process of contempt is a severe remedy, and should not be resorted to where there is fair ground of doubt as to the wrongfulness of the defendant’s conduct. [Emphasis added.]
Thus, not all subsequent infringements by an enjoined party are deemed in contempt of the court, even though an injunction may be written broadly enjoining, as in California Paving, further infringements.
While the courts have been uniform in acknowledging that contempt does not embrace all infringements by modified devices, there has not been uniformity in the actual standards for determining (1) when contempt proceedings will be entertained, and (2) when contempt will be found. These are separate questions and the standard for determining the answer to each must be addressed in this appeal.
II.
Injunctions in patent cases, like injunctions in other types of cases, are subject to Rule 65(d) Fed.R.Civ.P., which provides:
(d) Form and Scope of Injunction or Restraining Order. Every order granting an injunction and every restraining order shall set forth the reasons for its issuance; shall be specific in terms; shall describe in reasonable detail, and not by reference to the complaint or other document, the act or acts sought to be restrained; and is binding only upon the parties to the action, their officers, agents, servants, employees, and attorneys, and upon those persons in active concert or participation with them who receive actual notice of the order by personal service or otherwise.
Contempt authority is provided to the federal courts under 18 U.S.C. § 401 (1982),
*1526 §401. Power of court
A сourt of the United States-shall have power to punish by fine or imprisonment, at its discretion, such contempt of its authority, and none other, as—
(1) Misbehavior of any person in its presence or so near thereto as to obstruct the administration of justice;
(2) Misbehavior of any of its officers in their official transactions;
(3) Disobedience or resistance to its lawful writ, process, order, rule, decree, or command.
Thus, in view of the requirement for definiteness and the limitation of contempt enforcement to “lawful” orders, many courts refrain from broadly enjoining “further infringements” and limit the injunction as indicated in the American Foundry opinion. See, e.g., Square Liner 360°, Inc. v. Chisum,
If the potent weapon of judicial contempt power is to be brought to bear against a party for violation of an order, “one basic principle built into Rule 65 is that those against whom an injunction is issued should receive fair and precisely drawn notice of what the injunction actually prohibits.” Granny Goose Foods, Inc. v. Brotherhood of Teamsters,
The unreasonableness of a decree incorporating a vague or broad prohibition against “infringement” of a “patent” is alleviated because of the universal rule, to be addressed infra, that contempt proceedings, civil or criminal, are available only with respect to devices previously admitted or adjudged to infringe, and to other devices which are no more than colorably different therefrom and which clearly are infringements of the patent. This limitation is seen as properly balancing the interests of the respective parties. An enjoined party is entitled to design around the claims of a patent without the threat of contempt proceedings with respect to every modified device although he bears the risk that the enjoining court may find changes to be too insubstantial to avoid contempt.
Conversely, where an injunctiоn is written narrowly against a particular infringing device, contempt may, nevertheless, be found on the basis of a modified infringing device. An enjoined party under a narrow decree will not be permitted to escape on a purely “in rem” theory that only a particular device is prohibited, where it is evident that the modifications do not avoid infringement and were made for the purpose of evasion of the court’s order. Again, the standard is whether the differences between the two devices are merely colorable. Accord McCullough Tool Co. v. Well Surveys, Inc.,
Authority can be found in all circuits for these general principles, but their implementation varies not merely from circuit to circuit but from court to court. Part of the uniformity in patent law which we see as a necessary element is uniformity in the scope of relief which is available to the patent owner. Otherwise, forum shoрping, the vice sought to be remedied by creation of this court,
III.
The injunction entered in the present case was in the following terms:
6. The Defendant ... [is] enjoined and restrained from making, using or selling insulation hangers or refractory anchors of the type and nature identified by the Plaintiff in its Complaint against the Defendant for the remainder of the life of U.S. Patent No. 3,738,217 issued June 12, 1973.
Despite the reference to the complaint, contrary to Rule 65(d), Jones has not challenged this error, nor does Jones challenge that the injunction is enforceable against devices other than the specific THERMAL-LOCK device of the original suit. Jones’ challenge is to the standards applied by the district court in holding the company in contempt. Jones urges that its ULTRA-LOCK devices do not infringe the claims of ’217 and that the differences between the THERMAL-LOCK and ULTRA-LOK devices are so great that KSM should have to bring a separate suit to determine infringement by these devices. KSM, on the other hand, asks us to endorse the standard on contempt proceedings utilized in this case and, of course, to uphold the contempt judgment.
A.
The standard for determining contempt applied in the present case was that set forth in Interdynamics, Inc. v. Firma Wolf,
[I]f two devices do the same work in substantially the same way, and accomplish substantially the same result, they are the same, even though different in name, form or shape. Interdynamics II,698 F.2d at 162 {quoting Interdynamics I,653 F.2d at 99 ).
This doctrine was adapted from the familiar doctrine of equivalents enunciated by the Supreme Court in Graver Tank & Mfg. Co. v. Linde Air Products Co.,
In adjudging Jones to be accountable in contemрt proceedings and in holding Jones
B.
Turning first to the question of the judgment of contempt itself, we agree, of course, that the issue in contempt proceedings is violation vel non of the injunction, not patent infringement. Nevertheless, devices which could not be enjoined as infringements on a separate complaint cannot possibly be deemed enjoined as infringements under an existing injunction in contempt proceedings. Accord MAC Corp. of America,
The authorities are uniform that the modified device must be an infringement to find contempt of such an injunction. See, e.g., Panther Pumps Equipment Company, Inc. v. Hydrocraft, Inc.,
Even if the new product may infringe the patent, as long as it is more than “color-ably different” the infringement should not amount to a contempt nor should it be tested in contempt proceedings. Siebring v. Hansen, 346 F.2d [474] at 477 [(8th Cir.1965)]. [Emphasis added.]
Interdynamics I,
It may not properly be assumed, as does the Interdynamics standard, that, because the ULTRA-LOK devices, in a sense, are “equivalents” to the enjoined THERMAL-LOCK device, they are also equivalents of the patent claims. As the Supreme Court observed, “[I]n determining equivalents, things equal to the same thing may not be equal to each other.” Graver Tank,
In making a finding that the accused new device is an infringement, the court cannot avoid looking at the claims of the patent. It may, in some cases, only be necessary to determine that the modified device has not been changed from the adjudged device in a way which affects an
In litigated cases, the injunction must be interpreted in light of the rulings of the court on the scope of the claims. The patent owner may not, in contempt proceedings, seek to broaden the scope of the claims which were adjudicated and, thereby, catch the modified device. Marston v. J.C. Penney Co.,
On the other hand, with a consent decree, an adjudged device conceivably could have been found not to fall within the scope of the claims upon a full trial. Nevertheless, such a device is an admitted infringement, and the claims of the patent may be cоnstrued in light of that admission when the court undertakes to determine whether a modified device is also an infringement in contempt proceedings.
Lest there be any doubt, we are speaking of infringement only in the sense of falling within the scope of the claims. Whether there is infringement may not be challenged in contempt proceedings on the basis that the patent is invalid. The validity of the patent is the law of the case in such proceedings. See Carter Products, Inc. v. Colgate Palmolive Co.,
In the instant case, Jones has admitted that its THERMAL-LOCK device infringed the claims of the ’217 patent. The record shows that the Jones THERMAL-LOCK device, indisputably, literally embodies the elements of the claim.
On the other hand, Jones asserts that its ULTRA-LOK devices have been modified in a manner which avoids infringement. An element in claim 1, the only indеpendent claim, is a “stud of rectangular cross section having one pair of opposed sides narrower than the other pair.” Claim 1 also specifies, “a plurality of opposed notches ... cut into the narrower sides of the stud.”
There is no dispute that Jones ULTRA-LOK I and II studs do not literally infringe claim 1. The ULTRA-LOK studs are made from round stock which is selectively flattened to produce lateral protrusions. Accordingly, ULTRA-LOK studs are not of “rectangular cross-section” and do not have “opposed notches cut into the narrower sides thereof.” Thus, the modified devices cannot be deemed to fall within Jones’ admission of infringement with respect to its THERMAL-LOCK device contained in the consent degree. Due process requires that the consent decree be construed in accordance with the circumstances under which it was entered. United States v. Armour & Co.,
Since the district court believed that Interdynamics I and II precluded its consideration of the claim language and the evidence proffered by Jones with respect to prior art and the prosecution history, the court excluded such evidence and made no finding of infringement.
C.
The standard for the initial question, that is, whether infringement should be adjudicated in contempt proceedings, is difficult to articulate with precision, since it involves, to a large extent, the exercise of judicial discretion. MAC Corporation of America, supra. Such discretion is not, however, unlimited. Union Tool Co. v. Wilson,
There is, as previously indicated, uniformity in the circuits in so far as all have expressed the view that proceedings by way of contempt should not go forward if there is more than a “colorable difference” in the accused and adjudged devices.
For example, as stated by Chief Judge Godbold in Sure Plus Mfg. Co. v. Kobrin,
Even if [defendant’s] modified mirror assembly infringes the Sure Plus patent, as long as it is more than colorably different the infringement should not amount to a contempt nor should it be tested in contempt proceedings. Interdynamics, Inc. v. Firma Wolf,653 F.2d at 99 ; Siebring v. Hansen,346 F.2d at 477 .
The explanation by the Tenth Circuit in McCullough Tool Co. v. Well Surveys, Inc., supra, identifies the conflicting interests to be considered in this initial question:
The question is presented as to how a patentee should be allowed to proceed when following a successful infringement suit the infringer modifies the infringing structure and continues as before. Allowing the patentee to proceed by a summary contempt procеeding in all cases would unnecessarily deter parties from marketing new devices that are legitimately outside the scope of the patent in question. On the other hand, to require in each instance the patentee to institute a new infringement suit diminishes the significance of the patent and the order of the court holding the patent to be valid and infringed. Obviously there must be a dividing point between those cases which should be handled by a summary contempt proceeding and those cases which should be more fully viewed in an infringement proceeding. Courts have uniformly held that the standard to be applied in determining the dividing point is whether the alleged offending device is “merely ‘colorably’ different from the enjoined device or from the patent.”
Id. at 233,
The following analysis from American Foundry & Mfg. Co. v. Josam,
As will be hereinafter shown, all subsequent constructions by a convicted infringer are not triable in contempt proceedings. Only where such constructions are merely “colorably” different from the enjoined device or from the patent is the issue so triable. Such constructions may turn out to be infringements, but if they are more than “color-ably” different, the issue of infringement must be otherwise determined than by a contempt proceeding. Therefore, when the issue of infringement is presented in a contempt proceeding, the court must first determine whether it can properly entertain the issue in that proceeding. The propriety of the trial court’s determi*1531 nation that it should pass upon the 1933 device in a contempt proceeding is the issue which must be first determined by this court now. This issue is determinable by measuring the facts here by the legal definition of “colorable” as understood in connection with contempt proceedings for violation of a patent infringement injunction order. It is necessary to understand and state such definition.
The American Foundry court then defined “colorable” by the “fair ground of doubt” language from California Artificial Stone Paving and endorsed the Second Circuit view that:
Where the alteration in the device is “merely colorable” and obviously was made for the purpose of evading the decree without essential change in the nature of the device, the courts will try the question of infringement by the new device in proceedings for contempt for violation of the injunction [Citations omitted.] But where infringement by the new device is not clear on the face of the matter, and there are substantial issues for the determination of the court, the plaintiff may not have them determined in contempt proceedings, but must bring a supplemental bill for an injunction covering the new device, or institute a wholly new suit for such an injunction.
Radio Corporation of America v. Cable Radio Tube Corp.,
Under the above standard for determining a colorable difference, a party may seek relief by way of contempt proceedings only if the issues are appropriate for summary disposition. If substantial issues need to be litigated, particularly if expert and other testimony subject to cross-examination would be helpful or necessary, the сourt may properly require a supplemental or new complaint. The question to be answered under such standard is essentially a procedural one. Must substantial new issues be litigated to determine infringement?
Some courts, on the other hand, take a different view of the scope of a contempt proceeding, deeming it the proper context within which to litigate complex questions of infringement, including the Graver Tank doctrine of equivalents and prosecution history estoppel. See, e.g., Ransburg Electro-Coating Corp. v. Ionic Electrostatic Corp.,
With respect to the issue of when contempt proceedings will be allowed, we conclude that the procedural analysis used by the majority of courts should be adopted as the general rule.
IV.
In sum, the initial question to be answered in ruling on a motion for contempt is whether contempt proceedings are appropriate. That question is answered by the trial court’s judging whether substantial disputed issues must be litigated. The second question, whether an injunction against infringement has been violated, requires, at a minimum, a finding that the accused device is an infringement.
V.
For the foregoing reasons, we vacate the judgment of contempt and remand for proceedings consistent herewith.
VACATED AND REMANDED.
Notes
. The ruling of this court denying a motion to dismiss for lack of a final order is reported at
. See abo Nemmers, Enforcement of Injunctive Orders and Decrees in Patent Cases, 7 Ind.L. Rev., 287 (1973), for analyses of the difference between civil and criminal contempt proceedings and of the different remedies available for civil contempt vis-a-vis those provided under the patent statute (e.g., damages).
. This statute affords the general statutory authority for civil contempt sanctions, Interdynamics I, infra,
. See H.R.Rep. No. 312, 97th Cong., 1st Sess. 20-23 (1981); S.Rep. No. 275, 97th Cong., 1st Sess. 5, 19-20, reprinted in 1982 U.S.Code Cong. & Ad.News 11, 15, 29-30.
. Interdynamics I had found error in that "the [district] court undertook to inquire whether the [modified] product infringed the [subject] patent."
. In some cases a court may treat a motion for contempt as a supplemental complaint for modification of the injunction. 8 Deller’s Walker on Patent § 736 at 530 (2d ed. 1973). In so doing, the proceedings lose their summary character and relief would be in accordance with the patent statute, rather than under 18 U.S.C. § 401. The authority which has allowed full litigation in contempt proceedings appears to combine contempt power with supplemental complaint procedures.
. As indicated in Baltz v. The Fair,
. This court has addressed issues of res judicata in a number of cases, Kimberly-Clark Corp. v. Fort Howard Paper Co.,
Concurrence Opinion
concurring in part.
I agree that this case should be remanded for further findings on the question of equivalency, but I do not endorse the
I.
The question before the court is the law to be applied in the contempt action brought by KSM against Jones, an adjudged infringer that had modified its infringing insulation device in an attempt to avoid an existing injunction against infringement. On the facts of this case, it is a narrow question.
The broad question of law and procedure in patent contempt actions has occasioned great diversity among the circuits. The broad question does not have a single answer applicable in all сircumstances. Thus although I concur in the result reached in this case, I disagree with the dicta that the majority purports to apply in all cases.
Careful analysis of the decisions of the various circuits shows how fact-dependent these decisions have been. I know of no reason to withdraw from trial courts the authority, in their discretion, to find contempt summarily when a modified device is “merely colorably different” from the prior adjudicated device. Most of the circuits have heretofore recognized the need for discretion in district courts to handle contempt cases simply and expeditiously, when the facts warrant. The majority ruling limits this discretion.
The majority holds that it is always error simply to compare the devices and to determine whether they are “merely colorably different”. The majority holds that it is always necessary to return to the claims and to consider any questions raised of claim interpretаtion, prior art, and prosecution history estoppel. I agree that this is at times necessary or advisable. But I do not think it is proper for this court to impose this procedure upon courts and parties in all circumstances, including those where a trial court in its discretion does not deem it necessary to relitigate these questions, or where res judicata may apply.
I think that this court should limit its decision to the issue before it.
II.
The contempt proceeding is an essential tool of the judicial and public interest in the finality of litigation. It is applicable in patent cases as in other cases. California Artificial Stone Paving Co. v. Molitor,
Contempt “should not be resorted to where there is fair ground of doubt as to the wrongfulness of the defendant’s conduct”. Id. at 618,
In Interdynamics I the Third Circuit reasoned that if a successful patentee holding a finаl judgment could only attack a mod
The Interdynamics court observed that the procedure in contempt proceedings of comparing the modified product to the infringing product is the law of several circuits, citing Siebring v. Hansen,
In contrast to the summary proceedings facilitated by the Interdynamics decisions, the Fourth Circuit in Ransburg Electro-Coating Corp. v. Ionic Electrostatic Corp.,
Most circuits have favored a middle ground granting discretionary authority in the trial court to determine how much relitigation may be required in the interest of justice. In Universal Match Corp. v. New Castle Products, Inc.,
Some courts that have compared the modified device to the patent claims have not deemed it necessary to go beyond the claims or to review the prior art when determining equivalence in a contempt proceeding. Wadsworth Electric Mfg. Co. v. Westinghouse Elec. & Mfg. Co.,
In E-I-M Co. v. Philadelphia Gear Works, Inc.,
The Eleventh Circuit in Sure Plus Mfg. Co. v. Kobrin,
The competing interests which require accomodation are reflected in this variety of judicial approaches to balancing the rights of a party who has already achieved a favorable judgment, against the rights of a person to “invent around” and avoid a patent it had earlier infringed. In almost all cases, the procedure followed by the court bears a plain relation to the facts of the particular case.
I would avoid setting a doctrinaire standard, and I would preserve a broad discretion in the trial court to adapt enforcement of its judgments to the variety of factual situations which may arise. The majority opinion weighs against the view expressed by the Sixth Circuit in Schlegel Mfg. Co. v. USM Corp.,
In essence this appeal involves a very important principle, namely whether sanctity should be accorded to a consent decree of a Federal Court in a patent-infringement case.
sfc :jí ¡js s¡t $ :js
We ought to do nothing here to make the settlement of a patent-infringement action by consent decree a futile, meaningless gesture which will discourage such settlements in the future.
The preservation of judicial authority requires that “[t]he burden of avoiding infringement at the risk of contempt falls on the one enjoined”, Smith Int’l, Inc. v. Hughes Tool Co.,
III.
The majority view makes it harder for a court to invoke the summary procedures by which courts normally enforce their judgments. In the case before us, the majority directs the district court on remand “to reconsider whether, under the standard set forth herein, infringement with respect to the ULTRA-LOK devices should be tested in contempt proceedings” or some other way — presumably a full infringement trial. However, the “standard set forth herein” requires so thorough a legal reanalysis that it does not accommodate simple procedures.
The majority states that determination of whether to conduct a contempt proceeding
In the case before us, the district court has already held that the devices were “merely colorably different” and that the court was free of a “fair ground of doubt”, yet the majority appears to reject the district court’s decision that the case could be handled in a contempt proceeding. Thus it is not clear on what basis the majority wants the district court to reconsider what sort of proceeding to conduct. The majority states that it gives appropriate deference to the discretionary authority of the trial court, yet also criticizes the “summary” contempt proceeding. The only clear holding is that it will be more difficult to enforce a judgment of patent infringement against a eontemnor. This increased difficulty serves no public policy articulated by the majority.
The majority’s reason for vacating the decision below is “the refusal of the district court to consider whether the Jones ULTRA-LOK devices infringed the claims of the ‘217 patent,” stating that “the court cannot avoid looking at the claims of the patent”. The majority cites in support Hopp Press, Inc. v. Joseph Freeman & Co.,
I do not share the view that the district court “interpreted Interdynamics I and II as precluding any consideration of the issue of infringement”. The district court said that “[ujnder Interdynamics I and II, contempt is found if the defendants’ new alleged infringing device is ‘merely color-ably different’ from the admittedly infringing device.” KSM Fastening Systems, Inc. v. H.A. Jones Co., No. 79-1350 slip op. at 2 (D.N.J.1984). This did not “preclude” consideration of infringement; it merely stated the Third Circuit’s test for infringement in a contempt proceeding. The requirement that the district court must always make an express finding of “infringement” is, in this case, purely semantic.
I believe that the district court must retain the discretion to decide whether, for a particular modified device, a simplified contempt procedure will better serve the interest of justice. The majority has eased the way to enabling an adjudged infringer to oblige a court to retry any colorable modification the infringer can create, with fresh consideration of prior art and prosecution history, renewed claim interpretation, and the trappings of discovery and expert witnesses that accompany trial of these issues. By thus reducing the discretionary possibility of summary relief in contempt proceedings, harassing litigation will be harder to control.
The district court found that the UltraLok device was “merely colorably different” from the Thermal-Lock device. The court observed:
The court does not believe that Jones has taken a “new route” to invent around the KSM patent it infringed. Any differences to which Jones draws the court’s attention are either irrelevant to the determination which the court must make or, if relevant, are either not supported by the evidence or insignificant.
I agree that when it is necessary to invoke the doctrine of equivalents to determine whether a modified device is in violation of an injunction against infringement, this may raise a fair ground of doubt as to whether differences between the devices are “merely colorable”. It is then proper to review the claims, the specification, and the prosecution history if appropriate in the specific circumstances, with due regard to matters that are res judicata between the parties. If on remand infringement is found, literally or by equivalents, contempt is an appropriate remedy.
. The majority posits the “unreasonableness of a decree incorporating a vague or broad prohibition against ‘infringement’ of a ‘patent’”. A century of precedent weighs to the contrary. Nor has this question been raised on appeal.
. Interdynamics, Inc. v. Firma Wolf,