452 F.2d 1057 | C.C.P.A. | 1972
The issue here is whether the Board of Appeals erred in affirming the examiner’s rejection under 35 USC 103 of claims 1-3 in appellant’s patent application
The examiner and board relied on Hohenberg,
Carr, the reference which has sparked most of the controversy between appellant and the board, describes various techniques utilized in abortive attempts to produce uniform cell-sized, non-collapsed foams from linear or cross-linked póbj ethylene starting materials. Discussing his solution to that problem, Carr states:
The resultant polyethylene foam, which is produced by heating a blend of polyethylene, blowing agent and peroxide cross-linking agent, has a uniform “closed cellular structure of fine pore size” with 88% or more of the cells closed, and a density of “preferably about 2 to 10’ pounds per cubic foot.” It also possesses improved dimensional stability at elevated temperatures and improved recovery from compression over-conventional expanded polyethylene.
Said the board:
* * * Carr discloses a cross-linked polyethylene foam which corresponds, in physical properties, to the cross-linked polypropylene foam of the claims on appeal.
With Carr at hand, preparation of a cross-linked polypropylene foam having the same physical properties as Carr’s polyethylene product would be obvious to one of ordinary skill in the art.
Appellant argues that the peroxide cross-linking agent disclosed in Carr will not produce a cross-linked polypropylene foam having the claimed physical properties and has made of record an affidavit to this effect executed by George B. Feild.
Breslow et al. state that organic peroxides are not readily effective for cross-linking alpha-alkyl polymers such as polypropylene and disclose the use of certain azides for cross-linking such polymers. Appellant also employs azide cross-linking agents.
The Feild affidavit merely confirms the teachings of Breslow et al. One of ordinary skill in the art of applying the Carr procedure to the preparation of foamed polypropylene would obviously use cross-linking agents known to be applicable to polypropylene rather than those known to be inapplicable thereto.
It cannot be gainsaid — appellant’s arguments to tbe contrary notwithstanding — 'that polypropylene foam in general was obvious to one of ordinary skill in the art at the time appellant’s invention was made. Yokose and Hohenberg clearly suggest polyethylene as well as polypropylene foams, albeit of higher density than those claimed.
From what has been said of the various references cited by the board, we think it is also reasonable to infer that one of ordinary skill in the art at the time appellant’s invention was made had a mental appreciation of the desirability of a polypropylene foam possessing the properties recited in the claims. Carr made available to the art a low density polyethylene foam possessing a high percentage of closed and
Contrary to appellant’s arguments, the board did not err in considering the obviousness of the method of producing the claimed foam as an aspect Of the obviousness of the foam itself. While it is true, as appellant urges, that the existence of an obvious method of producing a given product does not necessarily negate patentability of the product so produced,
Turning to whether the art was aware of an operative process for implementing, or bringing to fruition, the claimed foam, this court has already held in Lewis that a process for preparing polypropylene foams of density less than 12 lbs./cu.ft. would have been obvious to one of ordinary skill. Here, too, we find no error in the board’s determination, predicated on a somewhat different reference combination, that the same process used to prepare foams of a density less than 10 lbs./cu.ft. would likewise be obvious. We see no reason why one of ordinary skill would not expect the Carr process to produce a polypropylene foam of the recited density and closed cell structure, once that process is suitably modified to incorporate the knowledge im
Finally, appellant contends that “one could not predict the properties of a hypothetical cross-linked polypropylene foam from a. disclosure [Carr] describing certain properties of a cross-linked polyethylene foam,” inasmuch as there are “differences between the polymers.” While we appreciate that polyethylene and polypropylene are “different” polymeric materials, appellant has not explained how, or why, that difference in starting material would be expected to affect or change such properties as density and closed cell structure which are possessed by the foams actually produced by the Carr process, so long as that process is modified as necessary to include known operative cross-linking agents for the particular polymeric starting material employed.
We have considered appellant’s remaining arguments, including* those relating to the two Feild affidavits, but are not persuaded thereby of reversible error by the board.
Serial No. 541,101, filed April 8, 1966 as a continuation-in-part of serial No. 230,740 filed October 15,1962.
We refer to tie Lewis decision for additional details of the method, as well as for definitions of the terms “cross-linked” and “stereoregular polypropylene.”
U.S. Patent No. 3,017,371 issued January 16,1962.
U.S. Patent No. 3,058,944 issued October 16, 1962, on an application filed March 15, 1961.
U.S. Patent No. 3,072,972 issued January 15,1963.
U.S. Patent No. 3,098,831 issued July 23, 1963, on an application filed May 1, 1959.-
Hohenberg, for example, states that the “expedient of foaming polyolefins is presently appreciated” and that the resultant foam cells “should be discrete or unicellular (not interconnected)” and “uniformly distributed” to insure optimum insulating and mechanical properties. According to appellant, the foams produced by Hohenberg have a density range of 12.5-56.2 lbs./cu. ft.
Appellant’s specification acknowledges that:
“Many attempts have been made to apply techniques used for a preparation of polyethylene foams to the preparation of polypropylene foams. For example, it has been suggested that peroxide cross-linking could be used in combination with blowing, but this does not yield, in the case of polypropylene, a closed cell foam. * * *”
As the solicitor points out, it is not surprising that a closed cell foam did not result from the use of peroxide, in light of that material’s lack of efficacy as a cross-linking agent for polypropylene described by Breslow.
In In re Klug, 51 CCPA 1529, 333 F. 2d 905, 142 USPQ 161 (1964), this court stated:
Whether a product is patentable depends on whether it is known in the art or it is obvious and Is not governed by whether the process by which it is made is patentable.
Similarly, in In re Naylor, 54 CCPA 902, 369 F. 2d 765, 152 USPQ 106 (1966), this court stated:
* * * Just as there may be obvious processes of producing new and nonobvious materials, * * * there may be unobvious methods of arriving at well known materials.