12 F. Cas. 1053 | U.S. Circuit Court for the District of Northern New York | 1863
We cau discover no just ground for maintaining that the reissued patent No. 449, of April 14th, 1857, was not proper as a reissue of the original patent of August 7th, 1847, if the patentee was the original and first inventor of the combination therein claimed, and if his rights had not been forfeited or destroyed by the lapse of time between the issue of the first patent and this reissue.
The same remark might, perhaps, have been applied, without further discussion, to the reissues No. 742, of June 21st, 1859, and No. 917, of February 28th, 1860, had not these last reissues been preceded by the reissue No. 450, of April 14th, 1857, and the reissue No. 917 also been preceded by the reissue No. 743, of June 21st, 1859. The claim in the reissue No. 450 is quite limited, and is in the following terms: “I claim as my invention, and desire to secure by letters patent, the improved beveling of the edges of the blades of scalloped sickles, as herein described.” This patent was surrendered and reissued as Nos. 742 and 743; and No. 743, in which the claim was in the following terms: “I claim as my invention, and desire to secure by letters patent, scalloped cutters, with their blades beveled, as herein described,” was afterwards surrendered and reissued as No. 917. Looking only to the claims in Nos. 450, 742, 743, and 917, it would certainly be difficult to find any evidence that Nos. 742 and 917 were for the same invention as that specifically claimed in No. 450. Indeed, a comparison of the language of these claims would seem, in the absence of all other proof, to repel such an allegation. But it is well settled, that, in deciding upon these applications for a reissue, and upon the question whether the invention claimed in the reissue is the same invention which was intended to be patented on the original application, the commissioner of patents is not confined to the ■claims, nor even to the examination of the evidence furnished by the specification, models, and drawings, accompanying the original application; and that any legal proof to show it to be the same invention should be received. Ex parte Ball [Case No. 812]; Ex parte Dyson [Id. 4,228]; and Wilson v. Singer [Id. 17,835]. It is, also, well settled, that the decision of the commissioner of patents upon the question, is prima facie evidence of such fact, and that the subsequent Inquiry, when the question is presented to a court and a jury, is limited to the fairness of the transaction — to the question of fraud In the surrefider. Philadelphia & T. R. Co. v. Stimpson, 14 Pet. [39 U. S.] 448, 458, 459; Stimpson v. Westchester R. Co., 4 How. [45 U. S.] 380, 404; O’Reilly v. Morse, 15 How. [56 U. S.] 62; Battin v. Taggert, 17 How. [58 U. S.] 74, 84; Woodworth v. Stone [Case No. 18,021]; Day v. Goodyear [Id. 3,678]. Even a statement in an original patent, that a part is old, or a disclaimer of a part, does not, it seems, necessarily prevent such part from being claimed in a reissued patent, though it would have that effect if made advisedly, and not by inadvertence, accident, or mistake. Ex parte Hayden [Id. 6,256], and Hayden v. James [Id. 6,260]. On the application for these reissues, the former claims and specifications and the original model and drawings were, of course, before the commissioner. It is shown by the testimony of Mr. Renwiek, an expert, that all the devices covered by. these three reissued patents are contained in the original model, and we have no means of knowing what other proof was furnished to the commissioner, or of determining that such other proof, considered in connection with such model, was not entirely conclusive upon the points of inadvertence, accident, or mistake, and of an intention to patent originally the inventions covered by the reissued patents. No proof of fraud, unfairness, .or falsehood, in respect to these applications for reissues, has been given; and, in the absence of such proof, we are bound, under the authorities cited, to presume that such reissued patents were properly issued, and that they do. in fact, cover only the inventions made prior to, and intended to be patented under, the first application. See, also, French v. Rogers [Id. 5,103].
It was urged by the defendants, not only that these reissues were needless and improper, but also that they were void on their face, as showing nothing patentable. WTe can find no solid ground upon which to maintain. either of these objections, and shall, therefore, pass to the other questions in the case. In the discussion of such questions, we shall refer to further áuthorities, which, as well as some hereinbefore referred to, will show, to some extent, at least, the grounds upon which the questions just referred to have been disposed of.
The patents themselves are prima facie evidence of the novelty and utility of the inventions patented; but the defendants are at liberty to show, by other proof, that they are neither new nor useful. The utility of the inventions claimed is not, we believe, seriously questioned, and we may, therefore, properly address ourselves to the questions of novelty, which have been seriously contested, and which certainly require careful examination.
It was insisted, by the learned counsel for the defendants, that the reissued patent No. 449 is void, for want of novelty; and that the invention claimed in the specification annexed to that patent was anticipated by Hussey, in 1833; by Ambler, in 1834; by Moore and Hascall, in 1839; by Nicholson, in 1844; and by Leland, in 1846. We think that neither of these objections urged by the counsel can be maintained. The invention claimed is the combination of a vibrating scalloped cutter, the indentations of whose edges act as a series of moving shear
There certainly was no such combination in Hussey’s patented invention of 1833. In his specification annexed to that patent, he says, that “the saw teeth should play clear of the guards, both above and below,” and the mode of construction specified makes provision for securing, as far as possible, this particular result; and, in the claim, at the close of the specification, he claims “the peculiar construction that the saw teeth may run free, whereby the necessary pressure and consequent friction of the two corresponding edges, cutting together as on the principle of scissors, is entirely avoided.” The vibrating scalloped cutter and the slotted guard fingers, mentioned in the patent of 1847, are differently constructed and arranged for the express purpose of securing the effect, in substance, of the friction and pressure of two corresponding edges cutting together, as on the principle of scissors, making the combination, in this respect, different, in its mode of construction, operation, and results, from that exhibited in the apparatus described in Hussey’s patent of 1S33. But this is not all, nor is it, in fact, the most important improvement in Hussey’s patent of 1847. The open slotted guard finger is not found in the invention patented in 1833; and, as the change in the form and operation of this slotted finger is of very great importance,bothinthereaperandin the mower, the invention of Hussey, patented in 1847, was very different from, and a great improvement upon, his invention patented in 1833. The shearing action produced by the different grinding or beveling of the cutters, and the different arrangement of the cutters and fingers, and the opening in the guard finger, were not embraced or described in the patent of 1833.
The Ambler machine of 1834, as described in his patent, or as presented by the evidence, certainly contained no such combination. Ambler’s cutter was a straight and not a scalloped cutter, and no shearing action was or could be produced in its operation. His barbed guard fingers were, also, quite different from the open slotted guard fingers of Hussey, and, if they could be used with a scalloped cutter, could not have produced the same results.
Moore and Haseall’s machine of 1S39, as described in the patent, or as actually constructed, did not embodj- this invention. There was no combination of vibrating scalloped cutters, operating as moving shear blades, with open slotted guard fingers operating as fixed shear blades; and the same remark is applicable to the Nicholson machine of 1S44. The guard fingers of Moore and Hascall’s machine were in no sense substantially like those of Hussey, and they may doubtless be used by the defendants without an infringement of Hussey’s patent. Moore and Hascall’s guard fingers resemble the tusks of an elephant more than they do the guard fingers of Hussey.
The Belaud machine, in regard to the parts of Hussey’s machine embraced in patent No. 449, was substantially like Hussey’s machine, but there is no evidence that Leland’s machine, embodying this invention, was constructed, or even invented, until May or June, 1846; and the evidence of Lovegrove shows, that, on his return to Baltimore, after the harvest of 1844, and in the month of August of that year this. invention of Hussey was explained to him by Hussey, and that Hussey then showed him the open slotted guard finger, forged strong and solid at the outer end, and not allowing the part of the finger above the slot to go back to the rod by about an inch, and that, in October or November, Hussey showed him a machine in which these improvements were embodied. Although this machine could not be practically and fully tested until the harvest of the next year, this evidence shows that Hussey antedates Leland in this invention.
But it is said, that this machine was on sale two years before Hussey’s application for a patent; and that, therefore Hussey’s patent is void. The evidence of Lovegrove, which is the only evidence to sustain this position, does not establish the fact claimed. He says that, in October or November, a single machine was complete, with the exception of the tongue or shafts; but there is no evidence to show when these were added, or when the machine was first offered for sale. It is certainly proved, that this machine was then in Hussey’s factory, with other machines which he was selling, but it was incomplete, and had never been tried in the field; and the evidence of Love-grove fails to show that this particular machine was ever offered for sale, or sold, although it is most probable that it was first, tried and used in the harvest of 1845, and was afterwards sold during that year. Love-grove testifies that, in December, 1844, he went to South America and was gone nine months, and had no idea what became of that particular machine. He further testifies, on his cross examination by the defendants. that, while in South America, he received a letter from Mr. Hussey, stating that he was going to try his first new cutters in the field, which he presumed-was the machine referred to; and that Hussey was very cautious about alterations, and rarely built more than one machine, with much alteration, without trying it in the field. And this is all the testimony there is on this point. Hussey’s application for his patent was made on the 17th of February, 1S47, and his patent was granted August 7th, 1S47. There
The reissued patent No. 742 is for a combination of side and cross bearings of the guards, with flush edges at and near the forks of the blades, substantially as described, and is for this only. It is insisted, by the defendants, that this patent is void for want of novelty, having been as they allege, anticipated by White, in or before 1837. The cutting apparatus of White, in which this invention, is alleged to be embodied, was made an exhibit, and has been examined in reference to this question of novelty. It has substantially the same side and cross-bearings of the guards as the Hussey machine, and it has a scalloped cutter with' flush edges; but it is insisted by the plaintiff, that it does not present the same combination, because the separate plates, which together constitute the scalloped cutter, each plate forming a single projection of the tooth-formed cutter, were, as a general rule, placed on the cutter bar, with their flushed edges so arranged that only every other flush edge was uppermost, the alternate plates being placed on the bar with their flushed edges on their lower side. It is conceded that there were exceptions to this rule, there being, if we recollect rightly, in one case two, and in another three, of the adjoining plates, having their flush edges on the same upjier or lower side, as they were fastened to such cutter bar. The evidence in the case shows, that a cutter bar constructed in this manner is much inferior to one constructed according to the specification of Hussey; that it chokes more rapidly and requires more frequent cleaning; and that the cutters and other parts of the machine are more likely to be broken or injured. It is quite certain, that Hussey’s mode of arranging the cutter blades, with the flushed edges of each on the lower side, is so far preferable to the alternate arrangement, as to constitute a substantial difference in the practical operation of the machine. The White machines were substantially abandoned and given up. Those which the witnesses Foster and Williamson had, and on which this point in the defence rests, were not found so useful as to induce a continuance of their manufacture. At this day, it will hardly be contended, that White, or Foster, or Williamson, had discovered or appreciated the fact, that these cutter plates should be arranged in the manner adopted by Hussey. If the maker of the White machine had appreciated the advantages of this arrangement, he would certainly have adopted it, as it was as easy to manufacture the machine with the uniform arrangement of the cutter plates, as it was to. manufacture it with the alternate or promiscuous arrangement presented in the cutting apparatus of that machine. As these differences are matter of substance, and as we think the patent of Hussey may properly be so construed as to give such effect to the words, “substantially as described,” as to require this uniformity of arrangement, we have concluded, after some hesitation, that the proof of the prior existence of the White machine does not avoid patent No. 742. This view of the question is sustained by the decision of the commissioner of patents, on the application for the renewal of this patent, the commissioner having then decided that the White machine did not contain the same combination as that claimed in this patent. Indeed, the favorable opinion of the commissioner of patents upon the applications for the renewal of the several patents of Hussey under which the plaintifl! proceeds in this suit, covers most of the questions now raised and decides them in favor of the plaintiff. In French v. Rogers [Case No. 5,103], Judge Kane held, that, in ordinary-cases of reissue, the commissioner’s action has more than prima facie influence, in deciding the question of identity of invention; and, in all cases, a judge may well rely upon the commissioner’s decision, to dispel doubts, or confirm his own impressions, upon the question of identity of devices or inventions.
The reissued patent No. 917 is for a combination of the finger beam (without a platform), the short, open slot fingers, having small projections below the cutter, the scalloped cutter, and the guides for the cutter, these parts being constructed and combined substantially as described, the cutter vibrating in a straight line, each scallop having an edge sliding in close proximity to an angular corner of the finger, and forming therewith a nipping angle, substantially as described.
The defendants insist that this patent also is void for want of novelty; and they allege that the invention was anticipated by Hus-sey’s machine of 1S33, by Ambler, by White, by Nicholson, and by Leland. If we are right in our conclusions heretofore expressed, this patent is not void for want of novelty; and certainly the combination now-claimed is not found in any other of the machines proved to have been invented prior to Hussey’s invention in the fall of 1844.
But it is said that all these reissues are too late, and that, if they cover more than the original patent protected, the exclusive right to the invention was lost by Hussey’s laches of ten years, and that the public are rightfully in possession of the invention, by virtue of Hussey’s laches and Leland’s free gift.
We cannot say, as matter of law, that these reissues were too late, nor is there any proof of fraud or laches upon which we can, on that ground, declare these reissued patents void. A reissue has been upheld when
This brings us to the questions of infringement; and, in respect to these questions, we have examined the cutting apparatus of the machines of the defendants Bradley and Bradley, which were made exhibits in the cause, and the testimony of experts produced by the respective parties. The scalloped vibrating cutter of those defendants is substantially like that shown in the reissued patents Nos. 449 and 917, the only material difference being, that the cutter plates or blades of the defendants’ machine are beveled only on one side, from heel to point, while those of Hussey are beveled on both sides, at and near the point of the several cutter blades. This difference we do not, however, consider as essential, under the. specifications and claims of these' reissued patents. We think that the guard fingers in both machines are, in principle and mode of operation, the same. These two elements of the combinations found in the two machines are substantially the same; and we are, therefore, of the opinion, that the reissued patent No. 449 is infringed by the manufacture and sale of the machines made by the defendants Bradley and Bradley.
We are, also, of the opinion, that the combinations covered by the reissued patents Nos. 742 and 917 are found in these machines of the defendants. The side and cross bearings of the guards are not identical in form, but the change is only of a mechanical equivalent for the side and cross bearings of Hussey’s guards; and, if patents can be avoided by changes of the character of those made by the defendants, the exclusive rights of patentees will be of but little- practical value. If these conclusions are correct, a decree must be made against the defendants Bradley and .Bradley.
But it is insisted, that no decree against the defendant Hubbard should be made in this suit, because he has no interest, except as a licensor, in the manufacture, by the defendants Bradley and Bradley, of the machines which infringe the plaintiff’s patents, he receiving a license fee of ten dollars for each machine so manufactured, and because he does not encourage or aid in the manufacture, or receive any benefit therefrom. except as such licensor. The only proof of Hubbard's connection with the defendants Bradley and Bradley, is contained in the admissions in his answer; and, as we understand that answer, it states, in substance, that he is the holder of several different patents for improvements in reaping and mowing machines, and that he has simply licensed the defendants Bradley and Bradley to make and vend machines with such patented improvements, on paying him a license fee for each machine by them made and sold under such license. It is not shown what these patents cover, or whether these
As against the other defendants, there must be the usual decree for a permanent injunction and an ■ account of the profits received by them in consequence of their infringement of the plaintiff’s patents.
KELSON, Circuit Justice. I have examined the foregoing opinion, and concur in it