224 F. 978 | D. Mass. | 1914
The plaintiff owns United States patent No. 865,064, issued September 3, 1907, to Will C. State, for a collapsible core. In its bill (dismissed by consent as to the Shawmut Tire Company) the Hood Rubber Company is charged with infringing all of the four claims of the patent.
The patented core is for use in manufacturing pneumatic tires of the double-tube type having inextensible bands or edges. The rubber tire, annular in form, having been built up and molded by heat upon the core, it is then necessary to withdraw the core from within the completed tire through the opening left along its inner or rim face. The diameter of the core within the tire being much greater than the width of the opening referred to, the inextensible bands or edges of the tire prevent the withdrawal of the core entire and require it to be constructed in sections which, held together as a complete core during the molding process, can be readily disconnected from each other, after that process has been completed and separately pulled out.
The plaintiff is a large manufacturer of tires, and it also, manufactures the cores which it uses for the purpose. The defendant, also a maker of tires, buys the cores which it uses from others. There is no proof of any infringement except by use of cores thus purchased. There is no dispute as to the kind of cores the defendant has thus
Claims 1 and 4 are broader than claims 2 and 3. They cover a device comprising independent segment-shaped members adapted to abut against each other with means overlapping their inner portions for maintaining them in abutting engagement (claim 1), or a plurality of independent segment-shaped members adapted to fit against each other and forming a collapsible core when in an abutting engagement with means independent of them for maintaining them in abutting position (claim 4).
'lire further requirements of claim 2 are, in substance, that the lines of severance between the several parts shall be oblique to the radii of the annular member formed by the parts, and that the parts shall be held in position together by a pair of rings clamping an annular beading formed by the inwardly projecting portions of the parts. The further requirements of claim 3 are that the parts shall be adapted when united to form an annular body, the points of severance being oblique to the radii, besides forming with their inwardly projecting edges an annular beading adapted to be "clamped by a pair of rings with melons for clamping the beading on the rings.
The defendant relies on a number of prior patents in support of its contention that the patent in suit is invalid in view of the prior art. I am unable to find in any of them what can fairly be called an anticipation of the patented device. If some of the devices described in them comprise cores made collapsible by division into sections, and if it can be said as to some of these that the core-sections are divided “non-radially,” I do not find in any of -them core-sections held together for use either by means overlapping their inner portions, or independent of them, or by any means corresponding to the annular beading formed by their inwardly projecting edges and the grooved clamping rings which constitute the means described in the patent; nor, as to any of these prior patented devices, does it appear that they were intended for or capable of use in the manner or for the purposes contemplated by the patent in suit.
The defendant further relies upon various unpatented core devices said to have been made or used by other tire manufacturers, beginning in the latter part of 1904 or the early part of 1905.
The bill in this case was filed December 5, 1910. The evidence was taken. beginning in March, 1912. There was a supposed final hearing in September, 1913, but before any decision was announced the defendant was permitted, in June, 1914, to reopen the case for further evidence regarding another alleged prior use claimed to have been earlier than 1905. The additional evidence bearing upon this question having been completed on both sides, the case was further argued, and rvas finally submitted December 18, 1914. It thus appears that all witnesses testifying with regard to prior use in 1905 or earlier gave their testimony at least six years after tile events to which their testimony relates.
Cores madé according to the working drawings from the Goodrich Company’s files, which have been marked Defendant’s Exhibits Goodrich Drawings E1412, E1414, E1416, E1418, E1423, respectively, would, in my opinion, embody the invention described in the patent in suit without material difference. These drawings bear various dates from August 17 to August 23, 1905. They are identified by a draftsman then in the Goodrich Company’s employ, as made and dated by him at or near the time of the dates which they bear. That the Goodrich Company made or had made for it cores according to these drawings at least as early as the dates upon them, that it was then using and has been ever since using such cores in the manufacture of its tires, seems to me sufficiently established by the testimony. Some of the witnesses were then and have ever since been employes of «the company in positions requiring them to know about the manufacture of its tires and the various cores used. Others were at the time employes, in capacities requiring similar knowledge, of core-making concerns from which cores to be made according to the drawings were ordered, by the Goodrich Company. What were claimed to be original orders for the manufacture of such cores were also produced. It is true that none of the identical cores then made according to the drawings were produced, but it appears that the cores soon wear out in use and have to be replaced by others. It cannot be said, however, that the testimony of these witnesses is based merely on their unaided recollection after six years, and it seems to me that the drawings sufficiently meet the requirement that testimony of this kind must be supported by “concrete, visible, cotemporaneous proofs which speak for themselves,” according to the opinion of the Court of Appeals for this circuit in Emerson & Co. v. Simpson, etc., Corporation, 202 Eed. 747, 750, 121 C. C. A. 113. The testimony referred to further tends to show the experimental making and use of cores according to some of these drawings as early as the spring of 1905.
To meet this evidence, the plaintiff attempted, by the testimony of the patentee and others, to carry back the date of his invention from the date of his application for the patent (December 14, 1906) to the fall of 1904, or some time in January, 1905. The patentee was then and has ever since been in the plaintiff’s employ as mechanical engineer. He testified that he conceived his invention in the early part of the fall of 1904; that the first experimental tire was made on it “along in October, 1904;” that his experimenting was carried on “around December” of 1904; and that tires were produced commercially from his cores by the plaintiff company in the spring of 1905. The first core, according to him, was built from a pencil sketch, which is not produc
The only testimony directly tending to corroborate that of the paten-tee himself as to the time when the first experimental tire was made on a core such as the Goodyear drawing shows comes from a witness who has been a tiremaker in the Goodyear Company’s employ since 1898, and was foreman of its tireroom when he testified in 1913. Pie says he built the first tire on such a core in October or November, 1904, or “about that time”; but he could refer to nothing enabling him to fix the date beyond the fact that the then foreman of the tirei'oom came to the factory in 1903. The president of the Goodyear Company, connected with it since 1898, testified that the name “New Goodyear Detachable” was given to tires made on the patented type of core, that the name was first applied to them “about January 1, 1905,” just before preparations were made to market that type of tire, and substantially at the time the first tire of the type was built. Ide also testified that he had no knowledge of tires of the type called by the above name being built on any other type of core than that described in the patent. Records and orders from the company’s files show sales of tires under the above name as early as January 11, 1905, but it does not seem to me clearly established that so-called “New Goodyear Detachable” tires then sold must have been made on cores corresponding to the Goodyear drawing, bearing the date of April 15, 1905.
The evidence upon which the plaintiff seeks to carry back the date of the invention to the fall of 1904 does not seem to me, on the whole, by any means as convincing as that whereby the defendant seeks to show use of cores made according to the Goodrich drawing as early as the spring of 1905 — particulaidy in view of the facts that the precise date of the Goodyear drawing is left to be determined only from the date found on it, without testimony from any witness who made or dated it, or any other positive proof — and that the patentee himself, while undertaking to fix the date of his invention as above, cannot deny that he let two years from that date pass before applying for any patent upon the alleged invention. I must hold that the plaintiffs evidence is not sufficient to prove the patentee entitled to a date earlier than that of his application, and this leaves the patent anticipated by the Goodrich cores shown to have been made and used at least as early as August, 1905.
But whether or not this result is right, I am obliged to regard the evidence taken after the reopening of the case in June, 1914, as establishing the use by the Fisk Rubber Company, of Chicopee, Mass., of cores embodying every essential feature of the invention described in the patent as early as the spring of 1904, a time considerably antedating the earliest date claimed by the patentee.
The testimony of its vice president, connected with it since 1902 (in 1904 superintendent of its factory), of its assistant superintendent, connected with it since 1903, and of the foreman of its machine shop between 1902 and 1906, seems to me to have shown that in the spring of 1904 it began to make tires with inextensible edges upon cores such as are shown in a drawing produced from its files and marked “Defendant’s Exhibit J.” The drawing bears date April 30, 1904, but as in the case of the Goodyear drawing there is no testimony from the person who made and dated it. It also bears, however, the 'date “S/4/04” with the letters “O. K. J. C. B.,” and John C. Bennett, foreman of the machine shop at the time, has testified that he put those letters on the drawing in compliance with instructions from his superiors that he “O. K.” all drawings before patterns were made or machine work done from them.
The full and explicit testimony given by the three witnesses referred to regarding the construction of cores according to this drawing, their division into sections, and their use in the early part of 1904 in making tires with inextensible edges, leaves me satisfied that the Fisk Company 'had then adopted and were successfully using what was substantially the device described in the patent in suit.
The testimony referred to shows that Defendant’s Exhibit J was one step in the Fisk Company’s development of a core adapted to the manufacture of such tires, which development, begun in 1902 or 1903, progressed. after May, 1904, until it resulted in the use of what is referred to as the “Integral Head and Dome Core” instead of the “Two Part Head and Dome Core” shown in the drawing J. The later form has been continuously used since 1904. But the evidence seems to me sufficient to prove that the “Two Part, etc., Core” was, for all practical purposes, no less an anticipation of the patent than the later “Integral, etc., Core,” üsed from the fall of 1904 down to the present time. What in the former consisted of two castings fastened together became one casting in the latter, and there was no other difference.
The plaintiff insists that because the drawing Exhibit J does not show any division of the core it represents into removable sections, it is not proof of the kind required by what is above quoted from Emerson, etc., Co. v. Simpson. , But the metal “dome head” adapted to fit over and be fastened to the metal “air bag ring,” as shown in Exhibit J, was adopted to replace an “air bag” of rubber covered with fabric previously used outside the metal “air bag ring” and capable of inflation so as to keep the tire in shape during the vulcanizing process, as the testimony fully shows. That the “air bag ring,” while so used, was nonradially divided into sections in order to remove it from within the finished tire is not left to depend on the unsupported memory of the witnesses. A specimen is produced from among the Fisk Company’s discarded cores and the testimony is sufficient for the conclusion that it was made before the summer of 1904. It is nonradially divided
The plaintiff attacks the testimony of the witnesses from the Fisk Company upon evidence claimed to show that cores more exactly like the cores of the patent than its “Integral Head and Dome Core” are and have been used by that company in producing tires of the kind referred to. The argument is that “the Fisk Company had a motive in volunteering this evidence, being an infringer of the State patent.” But supposing the Fisk Company’s use of such cores established, I am unable to find sufficient reason for doubting the substantial truth of the testimony of the witnesses referred to, taken in connection with the exhibits produced, upon the points above considered.
A decree may be entered dismissing the bill, with costs.