57 F. 742 | U.S. Circuit Court for the District of Western Pennsylvania | 1893
W. Forgie brings this bill against the Oil-Well Supply Company, Limited, for alleged infringement of á patent for wrench for oil-well tools, applied for January 28, 1888, and to him granted March 4, 1890, and numbered 422,879. The respondent is the selling agent of the Duff Manufacturing Company, which latter is the manufacturer of the alleged infringing machine, and the real respondent in the case. The device in dispute is a jacking apparatus for screwing and unscrewing oil-well tools. The respondents allege their device is made under patents issued to one Barrett, and. a suit against Forgie for alleged 'infringement thereof in his device was argued with this bill, and is disposed of in our opinion at No. 54, November term, 1891. 57 Fed. Rep. 748.
The present case turns upon two questions: (1) Was -Forgie the inventor of the device? and (2) if so, is the device patentable? Tools
This brings us to the question, who was the inventor of this device? In February, 1887, Forgie first met Barrett, who was connected with the Duff Manufacturing Company. He was the patentee of the Barrett lifting jack, a powerful mechanism, then manufactured by that company, in common use, and a standard article. This jack was provided with a base, in which was a stationary jacking machine, and from which extended a lifting bar, which was forced upward against the weight desired to be moved. This lifting bar was kept in place by a rectangular slot in the cage surrounding the mechanism. The internal mechanism of the Barrett jack was adopted in Forgie’s device, the cage being adapted to move on the circular track, instead of remaining stationary. Forgie claims
In considering the testimony we have not overlooked the second testimony of Porgie, taken without leave of court after the case had been closed, for objection thereto was waived at bar. In this Porgie enters with detail into the completeness of his invention, where he first met Barrett; a detail of facts which does not appear in his former testimony, and upon which the case was closed. His explanation of this is that his former counsel had not asked him these questions, but, in view of the fact that it was explicitly claimed in the answer that “Barrett was the inventor and originator of all the material and useful parts of said improvement, and that he communicated the same to. 'William Porgie, and that said William Porgie surreptitiously applied for a patent upon the improvement of Josiah Barrett, and unlawfully obtained letters patent therefor;” that Barrett’s testimony was given in detail to support these facts; that Forgie was then called in rebuttal, when he gave what we have called his first account, — we think we are justified in giving-more weight to the first than to the second. If Porgie had invented the device previous to this meeting, the evidence fails to disclose any experimenting on his part, any sketches, drawings, models, or other footprints which usually mark the inventor’s pathway; and, indeed, a year after, when he made application for a patent, there was no suggestion of any other mechanism than Barrett’s jack. Whether Porgie knew of the mechanism of Barrett’s jack before they met is not certain. In his answer to the bill in the other case, Forgie says, speaking of this meeting: “I was aware at said time that the salid Barrett had not covered by his claims in his said letters. patent the use of the appliances, otherwise than a lifting jack.” In his first testimony, in answer to the question whether he had before that time known of the Barrett jack the company was then making, he says: “Ho; I don’t believe I ever saw a Barrett jack before I went to them;” that in describing his invention to some one they sent him to Barrett, giving as a -reason, “because he was making a jack similar, and would be a likely man to make them for me.” When his later testimony was taken, he says the first time he saw it was in the fall or winter of 1886, at Kay’s store, or-at the Fairbanks Company,-in Pittsburgh. Whether, as stated in the answer, he was acquainted with the very claims of Barrett’s patent at the time of this meeting, or whether, as stated in his first testimony, he had not seta it before, and only went because some one suggested Ms going, or whether he saw it first in the fall or winter of 1886, one thing is certain, — that before this meeting he had made no study with a view of adapting the Barrett jack to unscrewing oil-well tools. Barrett’s account of the meeting is as follows:
“Question. Please state the circumstances of your first meeting with Mr. Forgie. Answer. Mr. Forgie came to me about February. He said he had been di*745 rected there from Kay Bros. & Co., Water street, and said he had seen my jack, and had an idea that it could be applied for wrenching and unwrenching oil-well jacks. He then proceeded to describe the old method of .the circle plate and pinch bar, and described how difficult it was to unwrench and wrench the tools with this appliance. He then, at different points of his conversation, interjected that all he wanted would be the privilege of selling the jack, if I would get it up for that purpose. He then began to expatiate on the great power of my jack, and said if it could be applied to this purpose, it would do this work of wrenching and unwrenching the tools with ease, he thought. He then asked me if I couldn’t get it up for this purpose. I told him that I had had some experience in oil-well drilling some years back, when I was trying an invention of mine on an oil-well, and I thought it would not be very difficult to do. There was a jack standing alongside of ns on the floor, with the rack partly raised in the base, the foot of the bar projecting, of course. He pointed to that, and said, ‘Could the wrench be placed between these two points?’ and he pointed with his foot to the parts, and asked if the power could he applied, and the wrenches forced together. I said, ‘Yes;’ I thought it could be. Then he said, ‘Could the rack he curved?’ And I said, ‘Yes; that wouldn’t be impossible.’ He then said: ‘How would yon construct this jack? What is your idea in regard to it?’ I took this jack, and laid it on the table horizontally, (the jack being of the same construction as the model I have before me, only that it was a full-sized jack,) and told him I would shorten the base, and leave sufficient of the base project to allow the bars to rest upon it; that in its travel on. the rack that the bars would not come in contact with the teeth of the rack, and I would increase the portion of the jack in thickness below the jaw of the base, where the handle enters. This would form an abutment for the wrench to rest against when pressure is brought to hear on them. I told him' I would fasten the rack upon the floor of the derrick, and allow the carriage to travel on this rack. He then said: ‘How would your carriage travel on the rack, when the base of the carriage surrounds the rack?’ I told him I would make the rack T-shaped. Says he, ‘How?’ I took a pad off the desk, made a cross section of the rack, like that, [witness makes sketch,] and I would make a slot In the back of the base, with inwardly projecting flanges, to fit into this T-shaped portion of the rack. I would then extend little lugs or bosses out from this lower bottom flange, for bolts to go through, and fasten to the derrick floor sufficiently far to allow these holts to pass this carriage in its travel on the rack, and reverse the foot on the bar the other way; that it would form an abutment for the other wrench to rest against. He then asked me if I thought it would work, and was practical. I told him I thought it was practical, but the best way would be to construct one, and put it on trial. I concluded to adopt No. 3 size of jack; that is the size we are making of an upright jack. By so doing we would require but two patterns to mgke, and two castings, and the strength of the rack could then be regulated by the bottom flange. I made arrangements then with Mr. Forgie that, in consideration of the fact that we would allow him the sole agency of this jack, I would expect him to furnish these two extra patterns and these castings, which he agreed to. I informed him that the best man I thought to make these patterns would be Mr. Rankin, as he had made all my jack patterns for my other jacks. I requested him to go and see Mr. Rankin, and make arrangements for having these patterns made, and I would go up and give him sketches and sizes, and all the necessary information, making these two patterns, which he evidently did. This was not all said and done at one meeting, but it all occurred within the first week of our meeting. Mr. Forgie was not there more than two or three times before I sent him to Mr. Rankin.”
Mr. Forgie’s account, when called in rebuttal, is as follows:
“Question. Please state exactly what was said, by you and what was said by Mr. Barrett at this first meeting. Answer. 'Well, I described the machine, and we talked over several plans to accomplish the work. Mr. Barrett’s sug*746 gestión that I would adopt a straight ratchet bar, pivoted to the floor at a center of forty-five degrees angle from the' tools, and let it pass the pivot, and to shove at a better angle, being opposed to the circle, claiming, as everybody else did, that the cage would shove itself off the track; but I prevailed upon using my own method, and he says, ‘All right; go ahead.’ Then we began to talk about the reversing apparatus; I demonstrating to Mr. Barrett how I could use a lever pivoted near one end, and a spring to hold it in place, for the reverse motion; but Mr. Barrett said, if he made the machine, that would necessitate him in making, in order to duplicate the part, new templets and jigs; and he says: ‘Why not go on, and use this machine of mine. I have everything necessary to do the work with, and can do it much cheaper, and I know it will do the work.’ Consequently we agreed upon that method, and I went to the pattern maker, and got the patterns made accordingly.”
It will be observed tbat this account is confirmatoiy of Barrett’s to a great extent. Botb show that Forgie had no definite plan. Forgie says they talked over several; that the conclusion was that Barrett suggested the adopting of his own jack, and asserted, “It will do the work.” This is in accord with Barrett’s statement that he took up one of his jacks, and explained to Forgie how he would adapt it to the proposed use. The interior mechanism of the jack was concealed. Forgie had never seen one before. There is no evidence that it was taken apart, and the mechanism exposed; therefore, the person most competent to suggest its possibilities for adaptation was its patentee and constructor. If Forgie had any other mechanism in view, he neither suggested it then, nor, as we have seen, when he applied for a patent a year later, but embodied Barrett’s jack in toto in his application. Nor is the fact to be lost sight of that Barrett placed his patent date on the pattern which Forgie had made under the arrangements between them; that, when Forgie replaced it with his own name, Barrett not only made him grind it off, but pay for a plate to replace it, on which was a reference to the Barrett patent. This branding the device as the embodiment of Barrett’s ideas went without protest from Forgie when face to face with Barrett; conduct utterly at variance with the to-be-expected actions of an inventor of a successful machine, every distinctive feature and adaptation of which, outside the jack, was, according to his second account, thought out before he «aw Barrett, and fully explained when they first met. This' stamping of the jacks and the delivery of them by the Duff Company to Forgie continued almost a year. Barrett is corroborated by Rankin, a pattern maker, who says Forgie was a stranger to him; that he came to him, and told him to see Barrett, who was to give him instructions how to make the patterns; that Barrett gave him the plans; that he got no instructions from Forgie, except to go to Barrett; that there were some sketches made by either witness or Forgie; but that he could not have made a working plan of the cage from what Mr. Forgie said. “Mr. Forgie could not explain to me how the Duff Manufacturing Company or Barrett jack was made.” We think also the evidence of complainant’s own witnesses, TouhiU and Zahnizer, as far as they go, corroborated Bar
But, assuming the device in suit was Forgie’s sole work, does it. show patentability? It is to he noted that a jacking mechanism was old; indeed, that, when occasion required, it was used horizontally, as well as vertically; that when so used it was a matter of indifference whether the lifting bar moved, and the jacking mechanism was stationary, or vice versa. The device was adapted to both conditions, and whether the lifting bar or the jack frame moved depended on the comparative resistance of the bodies at. either end. It should also be noted the lifting bar in the Barrett jack was kept in place by a suitable slot. Xor was a carriage, with a forcing mechanism, and moving on a toothed rack, a new thing in mechanics. In Poole’s patent, Xo. 833,667, (1886,) we ñnd a toothed track, a carriage with forcing mechanism moving thereon, and confined by a T-shaped flange and a corresponding slot. The forcing mechanism consisted of a cam plate engaging' with ihe cogs, but there is no inherent difficulty in applying the principle of a jacking mechanism thereto. The wrenches were old, and their use in both methods is identical; and the quadrant bar as a base, shifting in an arc, for the application of power, was in common use. If there had been none of these, assuredly there would have been invention, and that of a high order, in the device in suit; but when Porgie conceived the abstract idea of adapting a jack mechanism to a circular forcing path, (and that is all he did,) the perfecting of this idea, with the means and appliances already in use, was to our mind in the sphere of construction, and not of invention. It is an element, though not a controlling one, that there were no previous attempts to reach this result. The old method was blindly followed, until Porgie thought of the use of a jack in place of human strength. As soon as this was suggested to one skilled in the construction of jacking mechanism, it was worked out at once. How rapid this Was is shown by the fact that in ten days from the first meeting the very patterns were designed and completed, and the device, substantially in the form as afterwards manufactured, complete. That