FEDMET RESOURCES CORPORATION, Plаintiff-Appellant, v. UNITED STATES, Defendant-Appellee, and ANH Refractories Company, Defendant-Appellee, and Resco Products, Inc. and Magnesita Refractories Company, Defendants-Appellees.
No. 2013-1539
United States Court of Appeals, Federal Circuit
June 20, 2014
912
Costs
No costs to either party.
Antonia Ramos Soares, Trial Attorney, Commercial Litigation Branch, Civil Division, United States Department of Justice, of Washington, DC, argued for defendant-appellee United States. With her on the brief were Stuart F. Delery, Assistant Attorney General, Jeanne E. Davidson, Director, and Patricia M. McCarthy, Assistant Director. Of counsel on the brief was Devin S. Sikes, Attorney, Office of the Chief Counsel for Trade Enforcement & Compliance, United States Department of Commerce, of Washington, DC.
Joseph W. Dorn, King & Spalding LLP, of Washington, DC, argued for defendant-appellee ANH Refractories Company. With him on the brief was Brian E. McGill.
Camelia C. Mazard, Doyle, Barlow & Mazard PLLC, of Washington, DC, for defendants-appellees Resco Products, Inc., et al.
Before RADER,* REYNA, and WALLACH, Circuit Judges.
Opinion for the court filed by Circuit Judge REYNA. Dissenting opinion filed by Circuit Judge WALLACH.
REYNA, Circuit Judge.
Fedmet Resources Corporation (“Fedmet“) appeals a final decision of the U.S.
BACKGROUND
I. The Underlying Investigations
On July 29, 2009, Resco Products, Inc. (“Resco“) filed a petition with the Department of Commerce (“Commerce“) requesting initiation of antidumping and countervailing duty investigations on imports of certain MCBs from China and Mexico. MCBs are a type of refractory brick used to line ladles and furnaces employed in steelmaking and stеel handling processes. Resco‘s petition proposed that the scope of the investigations be limited to the following:
[C]ertain chemically bonded (resin or pitch), magnesia carbon bricks (“MCB“) whose magnesia component contains at least 70 percent magnesia (“MgO“), regardless of the source of raw materials for the MgO, with carbon levels ranging from trace amounts to 30 percent, regardless of enhancements, regardless of whether or not antioxidants are present. The scope of this investigation excludes alumina-carbon bricks, alumina-silicon-carbide-carbon bricks and all dolomite class bricks.1
Joint Appendix (“J.A.“) at 492-93 (footnotes omitted). In proposing that the domestic like product be defined to cover only MCBs, the petition further limited the proposed scope of the investigation by describing MCBs as the product covered by the petition and distinguishing MCBs from other types of refractory bricks:
There are several types оf standard refractory bricks in addition to magnesia carbon, the subject of this petition. Among the most important are fired magnesite, fired bauxite, magnesia dolomite and magnesia alumin[a] carbon brick. Each of these bricks possess certain unique properties, which make their use highly preferred, and even required, for certain uses in the lining of steel, ceramic, and other furnaces and holding vessels. The different types of bricks are not generally substitutable in a technical sense, due to varying chemical and physical properties and wear characteristics.
Id. at 498 (emphases added). This language prompted Commerce to inquire regarding the proposed scope of the investigation vis-à-vis other types of refractory bricks. In particular, as part of its pre-initiation investigation, Commerce issued a questionnaire, referring to the subject of the petition as “MCB.” Resco responded to the questionnaire on August 10, 2009. Regarding Questions 6 and 7, Resco stated:
[Question] 6. On page 10 of the petitions you state “{t}here are several types of standard refractory bricks in addition to MCB, the subject of this petition. Among the most important are fired magnesite, fired bauxite, magnesia dolomite, and magnesia aluminum carbon
brick.” How does your proposed scope exclude these types of refractory bricks? [Answer] The scope of our petition focuses only on MCB. These other products do not provide the same performance where MCB are used in steelmaking and steel handling applications. Their use or substitution results in significantly lower performance, higher costs and can be disruptive to the steel maker‘s operation. No other system over the last 35 years helped steel makers achieve performance levels in furnace and ladles like MCB, which are used in the most critical and high wear areas of the furnaces and ladles.
[Question] 7. If necessary based on the response to the questions above, please provide a revised version of the scope of the investigations as it should appear in the Federal Register.
[Answer] Petitioner does not believe it is necessary to revise the scope based on the responses to the questions above. The complete version of the scope of the investigations as it should appear in the Federal Register is provided in the petition.
Id. at 505-06 (emphases added). On August 14, 2009, at Commerce‘s request, Resco revised its proposed scope language to remove the explicit exclusion of alumina-carbon bricks, alumina-silicon bricks and dolomite class bricks. Resco confirmed that the exclusion was unnecessary because those three types of bricks do not have the magnesia levels specified by Resco. See id. at 513.
Resco continued to reinforce the distinction between MCBs and other types of refractory bricks during the preliminary injury invеstigation conducted by the United States International Trade Commission (“Commission“). In particular, on August 19, 2009, Resco‘s counsel testified before the Commission that:
[O]ther refractory products, such as fired magnesite, fired bauxite, magnesia dolomite, and magnesia alumina graphite bricks, and the subject merchandise do not have the same physical characteristics and uses are not perceived by producers and purchasers as substitutable and are easily differentiated by price.
Id. at 396.
Commerce published notices of initiation of antidumping and countervailing duty investigations on August 25, 2009. In the notices, Commerce adopted almost all of the language proposed by Resco to define the scope of the investigations:
Imports covered by this petition consist of certain chemically bonded (resin or pitch), magnesia carbon bricks with a magnesia component of at least 70 percent magnesia (“MgO“) by weight, regardless of the source of raw matеrials for the MgO, with carbon levels ranging from trace amounts to 30 percent by weight, regardless of enhancements, (for example, magnesia carbon bricks can be enhanced with coating, grinding, tar impregnation or coking, high temperature heat treatments, anti-slip treatments or metal casing) and regardless of whether or not anti-oxidants are present (for example, antioxidants can be added to the mix from trace amounts to 15 percent by weight as various metals, metal alloys, and metal carbides).
Certain Magnesia Carbon Bricks from the People‘s Republic of China and Mexico: Initiation of Antidumping Duty Investigations, 74 Fed. Reg. 42,852, 42,857 (Aug. 25, 2009); Certain Magnesia Carbon Bricks from the People‘s Republic of China and Mexico: Initiation of Countervailing Duty Investigation, 74 Fed. Reg. 42,858, 42,861 (Aug. 25, 2009).
On September 20 and 21, 2010, Commerce published its final affirmative antidumping and countervailing determinations and issued antidumping and countervailing duty orders on MCBs from Mexico and China. The orders continued to use the scope language prоposed by Resco and adopted during initiation of the investigations. See Certain Magnesia Carbon Bricks from Mexico and the People‘s Republic of China: Antidumping Duty Orders, 75 Fed.Reg. 57,257 (Sep. 20, 2010); Certain Magnesia Carbon Bricks from Mexico and the People‘s Republic of China: Countervailing Duty Order, 75 Fed.Reg. 57,442 (Sep. 21, 2010) (collectively, “the orders“). Likewise, the Commission‘s final injury determination continued to define the domestic like product as coterminous with the scope of the investigations. See Certain Magnesia Carbon Bricks from China and Mexico, Inv. Nos. 701-TA-468 and 731-TA-1166, -1167, USITC Pub. No. 4182 at 6-7 (Sep. 2010).
II. Fedmet‘s Scope Ruling Request
Fedmet is a domestic importer of refractory bricks and other products used in the steelmaking industry. Fedmet was not a party to the antidumping and countervailing duty investigations initiated at the petition of Resco. Additionally, the record does not indicate that Fedmet was served with an antidumping or countervailing questionnaire by either Commerce or the Commission.
On May 3, 2011, Fedmet requested from Commerce a scope ruling that its Bastion® line of magnesia carbon alumina (“MAC“) 3 bricks was outside the scopе of the outstanding antidumping and countervailing duty orders on MCBs from China and Mexico. In its request, Fedmet indicated that its MAC bricks contain approximately 75 to 90 percent magnesia, 8 to 15 percent alumina (i.e. aluminium oxide), 3 to 15 percent carbon, and smaller amounts of silicon dioxide, calcium oxide, iron oxide
On March 30, 2012, after receiving comments and questionnaire responses from interested parties, Commerce preliminarily determined that Fedmet‘s MAC bricks were included within the scope of the orders. Commerce first found that the plain language of the orders was ambiguous regarding whether “MCBs with alumina” were covered. Commerce then examined the descriptions of the subject merchandise contained in the petition, the initial investigation, the determinations of Commerce and the like product determination of the Commission. Commerce found that these sources contained language that excluded MAC bricks from the scope of the orders. Commerce nonetheless determined that these sources were not dispositive because MAC bricks were only referenced “by name” and “no technical descriptions” were provided in the underlying investigations to identify the chemical composition of MAC bricks.
Commerce therefore turned to the extrinsic information obtained from interested parties and through its own research during the scope proceedings. Commerce gave “the greatest weight” to the fact that Fedmet‘s MAC bricks “fall squarely” within the levels of magnesia and сarbon provided in the orders. Commerce also found that Fedmet‘s MAC bricks have the same characteristics and uses as MCBs, and are marketed and sold in the same way and through similar channels as MCBs. Based on these findings, Commerce preliminarily determined that Fedmet‘s MAC bricks were included within the scope of the orders.
Commerce issued its final scope ruling on July 2, 2012, wherein it continued to find ambiguity in the record of the underlying investigations. Acknowledging that MAC bricks had been identified as a type of refractory brick distinct from the domestic like product, Commerce observed that Resco never identified the chemical composition and technical specifications of MAC bricks, or “expressly state[d] that MAC bricks with a chemical composition like that of Fedmet Bastion® MAC bricks fall outside of the scope of the investigations or the resulting Orders.” J.A. at 480. Additionally, Commerce noted that the Commission included an “MCB with added alumina” in its pricing analysis. Based on the evidence regarding the physical characteristics and uses of Fedmet‘s MAC bricks and the manner in which they are advertised and sold, Commerce determined that Fedmet‘s MAC bricks were included within the scope of the orders.
Fedmet filed suit at the Trade Court seeking to reverse Commerce‘s scope ruling. The Trade Court upheld Commerce‘s determination, finding that it was supported by substantial evidence and in accordance with law. The Trade Court agreed with Commerce that the record in the underlying investigations was not dispositive.4 In finding ambiguity in the intrinsic record, the court relied on evidence obtained during the scope proceedings that
Fedmet timely appealed. We have jurisdiction pursuant to
DISCUSSION
This Court reviews the Trade Court‘s grant or denial of judgment on the agency record without deference. See Corus Staal BV v. Dep‘t of Commerce, 395 F.3d 1343, 1346 (Fed.Cir.2005); ThyssenKrupp Acciai Speciali Terni S.p.A. v. United States, 603 F.3d 928, 932 (Fed.Cir.2010). We apply anew the same standard of review used by the Trade Court. Atar S.r.l. v. United States, 730 F.3d 1320, 1325 (Fed.Cir.2013). Accordingly, we must uphold Commerce‘s scope determination unless it is “unsupported by substantial evidence on the record, or otherwise not in accordance with law.”
I
The countervailing duty and antidumping duty statutes authorize Commerce to impose duties on imported goods that benefit from certain government subsidies in their country of manufacture, or that are sold in the United States at less than fair value. See
The plain language of a countervailing or antidumping order is “paramount” in determining whether particular products are included within its scope. King Supply Co. v. United States, 674 F.3d 1343, 1345 (Fed. Cir.2012). In reviewing the plain language of a duty order, Commerce must consider “[t]he descriptions of the merchandise contained in the petition, the initial investigation, and the determinations of the Secretary (including prior scope determinations) and the Commission.”
- The physical characteristics of the product;
- The expectations of the ultimate purchasers;
- The ultimate use of the product;
- The channels of trade in which the product is sold; and
- The manner in which the product is advertised and displayed.
Fedmet argues that Commerce‘s scope ruling is not supported by substantial evidence. Fedmet maintains that the administrative record in the underlying investigations clearly demonstrates that MAC bricks were excluded from the scope of the investigations, and that Commerce adopted the scope language proposed by Resco intending to exclude MAC bricks. According to Fedmet, the (k)(1) sources are dispositive, and Commerce‘s conclusion to the contrary is unsupported by substantial evidence. Fedmet argues in the alternative that, to the extent that examination of the (k)(2) factors is necessary to resolve any ambiguity, Commerce‘s findings under the (k)(2) factors are also unsupported by substantial evidence.
Commerce and the Intervenors below5 respond that the (k)(1) sources are ambiguous because there is no accepted industry standard for MAC bricks, аnd the record of the underlying investigations does not contain any technical specifications for MAC bricks. They contend that Commerce properly proceeded to an analysis of the (k)(2) factors and that such analysis is supported by substantial evidence. According to Commerce and Intervenors, Fedmet is inviting this Court to reweigh the evidence, which the Court is not permitted to do.
We agree with Fedmet. The (k)(1) sources are dispositive and unequivocally confirm that Fedmet‘s MAC bricks are not within the scope of the orders. First, these sources contain multiple representations made by Resco disclaiming coverage of all MAC bricks in general. For example, Resco explicitly asserted in its petition that MCBs and MAC bricks are “not generally substitutable” and have “varying chemical and physical properties and wear characteristics.” J.A. at 498. When Commerce requested confirmation that Resco‘s proposed language was sufficient to distinguish MCBs from other types of refractory bricks, including MAC bricks, Resco responded that no revisions were necessary and confirmed that its petition focused “only on MCB” and not other types of refractory bricks, which according to Resco “do not provide the same performance” as MCBs in steelmaking and steel handling applications. Id. at 506. Resco‘s counsel further supported the like product determination with testimony before the Commission that MAC bricks and MCBs “do not have the same physical characteristics and uses are not perceived by producers and purchasers as substitutable and are easily differentiated by price.” Id. at 396.
Second, the (k)(1) sources confirm Commerce and the Commission‘s understanding that the underlying investigations did not extend to MAC bricks. Commerce specifically inquired whether the proposed scope language was sufficient to exclude other types of bricks such as MAC bricks, implicitly demonstrating an understanding that such bricks should be excluded. The Commission echoed Commerce‘s understanding in its final injury determination when its stated that, although MAC bricks may be used in place of MCBs for some applications, they generally “do not have the same physical properties as MCBs, are
To put it simply, the question before this Court was asked and answered during the underlying investigations. Resco had an opportunity to clarify whether MAC bricks were included within the scope of the investigations, and it confirmed that they were not. In doing so, Resco chose to rely on industry terminology to continue to define the subject merchandise and the domestic like product. At the urging of Resco, Commerce adopted this industry terminology and defined the scope of the orders in terms of “mаgnesia carbon bricks,” with the understanding that other types of bricks such as MAC bricks would not be covered. In turn, the Commission adopted Commerce‘s language to define the domestic like product as MCBs, relying on Resco‘s representation that MAC bricks are not interchangeable with MCBs. Had Resco not made these statements, it is possible that the Commission would have defined the domestic like product differently and, in so doing, perhaps arrived at a different injury determination.
Indeed, the Tariff Act provides that only producers of the domestic like product, or unions or associations affiliated with producers of the domestic like product, may file a petition. See generally
A scope analysis begins with the scope language in a final order. If the language is ambiguous, the next step is an identification of the products that were actually investigated. The inquiry includes whether the petitioner sought to
Contrary to the dissent‘s view, the fact that the (k)(1) sources identify no “cut-off point” at which addition of alumina to an MCB transforms it into a MAC brick does not result in ambiguity. See Dissent at 925. The public—including domestic importers like Fedmet—is entitled to rely on the multiple statements in the (k)(1) sources disclaiming coverage of MAC bricks. To the extent that MCBs and MAC bricks do in fact overlap to some degree, the overlap was surrendered by Resco‘s failure to provide a technical definition or “cut off point” when asked to be more specific.
To be clear, our holding does not “elevate” Resco‘s petition over the language of the orders. See Dissent at 926. Commerce found that the scope language in the orders was ambiguous regarding whether Fedmet‘s MAC bricks were covered. J.A. at 367. The Trade Court did not disturb this finding and proceeded to analyze the (k)(1) sources. See Fedmet Res., 911 F.Supp.2d at 1353. The ambiguity in the scope language arises not because of the carbon and magnesia levels—which no party disputes are met by Fedmet‘s MAC bricks—but because the orders are limited to “magnesia carbon bricks.” This limitation is clear and unambiguous. As a result, the question of whether Fedmet‘s MAC bricks are covered by the orders must be resolved by examining the (k)(1) sources, which include Resco‘s petition, and we may only consider the (k)(2) factors if the (k)(1) sources are not dispositive. See
We recognize that antidumping and countervailing duty orders “should not be interpreted in a vacuum devoid of any consideration of the way the language of the order is used in the relevant industry.” ArcelorMittal Stainless Belg. N.V. v. United States, 694 F.3d 82, 88 (Fed.Cir.2012). But the reason why the (k)(1) sources are afforded primacy in the scope analysis is because interpretation of the language used in the orders must be based on the meaning given to that language during the underlying investigations. In this case, the terms “magnesia carbon brick” and “magnesia alumina carbon brick” are ubiquitous and well-understood in the refractories industry. Indeed, Resco characterized both types of bricks as “standard.”
Apparently satisfied by Resco‘s representations that industry terminology was sufficient, Commerce and the Commission determined not to go beyond the “name” of MAC bricks, not to provide any chemical composition or technical specifications for MAC bricks, and not to adopt an explicit exclusion for MAC bricks because it was unnecessаry. These decisions cannot now operate to create ambiguity or otherwise detract from the clear import of the meaning given to the term MAC bricks in the underlying investigations. While Commerce enjoys considerable latitude in clarifying its orders, it may not change the original scope of its orders through the interpretative process. See Tak Fat Trading Co. v. United States, 396 F.3d 1378, 1383 (Fed.Cir.2005); Duferco Steel, Inc. v. United States, 296 F.3d 1087, 1095 (Fed. Cir.2002).
The Trade Court erred in relying on evidence outside the (k)(1) sources to find ambiguity within those sources. Although the court acknowledged the repeated statements in the (k)(1) sources excluding MAC bricks, it found that “two critical facts” instilled the term with “considerable ambiguity.” Fedmet Res., 911 F.Supp.2d at 1354. First, the court found that “advertisements and other record evidence indicate that the term ‘MACB’ can refer to low-alumina bricks as well as high-alumina bricks.” Id. Second, the court found that “record evidence of industry naming conventions reasonably suggests that so long as the magnesia content of a brick with added alumina remains above 70%, it can be called either an MCB or an MACB.” Id. (emphasis in original). But the (k)(1) sources do not mention, much less make a distinction, between so-called “low-alumina” and “high-alumina” bricks. Indeed, in making its findings, the Trade Court relied solely on information provided by interested parties or obtained through Commerce‘s own research during the course of the scope proceedings. The (k)(1) sources themselves neither support the “two critical facts” nor the court‘s conclusion that “Resco may have intended to exclude only some MACBs” on which the Trade Court premised its finding of ambiguity. Id. (emphasis in original). Those findings therefore cannot provide the basis for holding that Commerce‘s finding of ambiguity in the (k)(1) sources is supported by substantial evidence.
In sum, because nothing in the (k)(1) sources detracts from the otherwise clear statements that all MAC bricks were excluded from the scope of the underlying investigations, we hold that the (k)(1) sources are dispositive of the question presented by Fedmet‘s scope ruling request. Commerce erred in proceeding to analyze the (k)(2) factors, and we decline to review such analysis.8 See Eckstrom Indus., Inc. v. United States, 254 F.3d 1068, 1076 (Fed. Cir.2001). Because Fedmet‘s bricks are MAC bricks, we hold that they are not covered by the orders.
CONCLUSION
Commerce‘s scope ruling is unsupрorted by substantial evidence. We therefore re-
REVERSED AND REMANDED
Dissenting opinion filed by Circuit Judge WALLACH.
WALLACH, Circuit Judge, dissenting.
The majority fails to ground its analysis in the plain language of the scope of the investigation, as defined in the antidumping and countervailing duty orders for MCBs (“the Orders“), and instead focuses on the petition of a domestic producer, contrary to the governing regulation. Because I would affirm the decision of the Court of International Trade (“CIT“), I respectfully dissent.
Fedmet‘s merchandise has concentrations of magnesia and carbon falling within the scope of the Orders. The majority nevertheless holds Commerce erred in finding Fedmet‘s magnesia alumina carbon (“MAC“) bricks were subject to the Orders because the (k)(1) sources “disclaim” MAC bricks. The trouble is that the (k)(1) sources never define the “disclaimed” MAC bricks except to say they have different features, uses, and prices than MCBs. Some MCBs with added alumina were in fact investigated as MCBs during the Commission‘s investigation, and none of the (k)(1) sources address how much alumina must be added before MCBs become MAC bricks that fall outside the scope of the Orders. Instead, the (k)(1) sources indicate that any MCBs with the recited carbon and magnesia concentrations would possess MCBs’ characteristic strength and usefulness. Substantial record evidence supports Commerce‘s finding that the (k)(1) sources do not dispositively resolve whether Fedmet‘s products are MCBs covered by the Orders, or are instead MAC bricks with different characteristics, uses, and prices. It was thus proper for Commerce to consider the (k)(2) sources.
In holding otherwise, the majority fails to defer to Commerce‘s factual findings with respect to industry terminology, and instead makes its own contrary findings that are unsupported by thе record. It also criticizes Commerce for failing to specifically define MCBs and MAC bricks in its Orders, even though binding regulation states “the descriptions of subject merchandise ... must be written in general terms.”
A scope ruling involves a “highly fact-intensive and case-specific determination,” King Supply Co. LLC v. United States, 674 F.3d 1343, 1345 (Fed.Cir.2012), which is “particularly within the expertise of [Commerce],” Sandvik Steel Co. v. United States, 164 F.3d 596, 600 (Fed.Cir.1998). “Commerce enjoys substantial freedom in conducting such scope inquiries,” Eckstrom Indus., Inc. v. United States, 254 F.3d 1068, 1072 (Fed.Cir.2001), and this court must affirm Commerce‘s determination as long as it is supported by substantial evidence, Sango Int‘l L.P. v. United States, 484 F.3d 1371, 1378 (Fed.Cir.2007).
“[T]he plain language of the ... order is paramount” in conducting a scope ruling. King Supply, 674 F.3d at 1345. “[T]he
“Based on the magnesia and carbon content alone,” Commerce found Fedmet‘s merchandise “f[e]ll within the scope of the Orders,” but it identified a “potential ambiguity regаrding whether the ... scope covers MCBs with alumina.” See J.A. 367. To resolve this question, Commerce considered the (k)(1) sources, which are “[t]he descriptions of the merchandise contained in the petition, the initial investigation, and the determinations of [Commerce] (including prior scope determinations) and the Commission.” See
The (k)(1) sources in this case include the Commission‘s investigation and injury determinations. The Commission‘s pricing investigation included MCBs with 4.6% added alumina, J.A. 370, which were also mentioned in the Commission‘s injury determination, see J.A. 18.23 & n. 135 (stating the Commission “collected quarterly f.o.b. pricing data for three MCB products” including “Resco‘s brand Maxline 10 AFX“); see also J.A. 309-10 (finding the Maxline 10 AFX was an “MCB with alumina“), 323, 370, 438, 459.2 Although 4.6% is less than the 8 to 15% alumina contained in Fedmet‘s merchandise, the inclusion of MCBs with alumina demonstrates that simply adding alumina to otherwise subject MCBs does not automatically withdraw them from the scope of the Orders.
The remaining (k)(1) sources do not dispositively show that MCBs with 8 to 15% alumina are excluded from the Orders. To the contrary, Resco‘s petition emphasizes that the combination of carbon and magnesia in MCBs results in “[h]igh thermal conductivity, ... [r]educed porosity, ... [h]igh corrosion resistance[, and] [g]ood reaction to alkaline environments.” J.A. 499. Fedmet‘s products contain the requisite concentrations of carbon and magnesia, suggesting they share these characteristics. Resco‘s petition states MCBs had different characteristics and uses than other refractory bricks (including MAC bricks), but did not define the different types of refractory bricks. Nor did Resco suggest how much alumina must be added to MCBs before they become MAC bricks with characteristics “unique” from MCBs. See J.A. 498.
Furthermore, none of Resco‘s questionnaire responses addresses the ambiguity posed by the Orders: whether adding 8 to 15% alumina withdraws otherwise-subject MCBs from the Orders’ scope. J.A. 506, 510, 513. There is no indication from the (k)(1) sources that Fedmet‘s products are “MAC bricks” excluded by Resco‘s petition and the Final Commission Determination. Commerce properly found the lack of “technical descriptions” made it impossible “to identify the chemical composition of MAC bricks.” J.A. 368. Commerce was supported by substantial evidence in finding the (k)(1) sources did not address, much less dispositively resolve, whether adding 8 to 15% alumina withdraws MCBs from the scope of the order.
The majority ignores this definitional problem. It states Resco “disclaim[ed] coverage of all MAC bricks in general.” Majority Op. at 919 (emphasis added). If adding any alumina to MCBs withdraws them from the Orders’ scope, the majority fails to explain how the Commission‘s Final Determination could encompass MCBs with 4.6% added alumina. On the other hand, if adding only small amounts of alumina is insufficient to transform an MCB into a MAC brick, the majority does not identify any cutoff point. Indeed, the majority admits as much in stating “the (k)(1) sources do not mention, much less make a distinction, between so-called ‘low-alumina’ and ‘highalumina’ bricks.” Majority Op. 922.3
By failing to acknowledge this definitional problem, the majority leaves the Orders open to manipulation. Rather than paying the antidumping and countervailing duties on MCBs, importers can simply add small amounts of alumina to their products and label them MAC bricks instead of MCBs.
The majority nonetheless states MAC bricks were adequately defined based on Resco‘s statement that MAC bricks and MCBs “‘do not have the same physical characteristics and uses are not perceived by producers and purchasers as substitutable and are easily differentiated by price.‘” Majority Op. at 915 (quoting J.A. 396). But it never establishes whether Fedmet‘s products fall within this definition of MAC
Indeed, Commerce‘s consideration of the (k)(2) factors demonstrates that Fedmet‘s merchandise is not materially distinguishable from MCBs.4 Commerce found that Fedmet‘s merchandise “share[s] physical characteristics with in-scope MCBs.” J.A. 485. It relied on the Millennium Steel study, which “specifically found that adding alumina to MCBs resulted in controlled expansion, better slag corrosion resistance, and enhanced ladle life due to better spalling resistance, all noted properties of MCBs.” J.A. 483 (emphasis added). Commerce found “carbon plays the critical role in preventing slag penetration when the magnesia content falls within the range identified in the scopе of the Orders,” and “conclude[d] that carbon in Fedmet[‘s merchandise] performs the same essential function as it does in MCBs.” J.A. 484. Commerce found this was consistent with the Orders, which include MCBs with metal additives of up to 15% as long as the prescribed levels of magnesia and carbon “ensure key properties of in-scope MCBs were met.” J.A. 484. Commerce also found Fedmet‘s merchandise and MCBs “are sold in the same channels of trade and are similarly marketed and advertised for the same uses.” J.A. 485. Under any performance-based definition of the goods—which, in this case, is all that the (k)(1) sources provide—Fedmet‘s merchandise is subject to the MCB Orders.
The majority‘s holding to the contrary contravenes precedent by elevating certain purported “disclaimers” by Resco over the language of the Orders. This court has made clear that the language of an order is “paramount” in conducting a scope analysis. King Supply, 674 F.3d at 1345. But the majority mentions the Orders only once, and focuses primаrily on Commerce‘s “implicit[] understanding” based on Resco‘s representations.5 See Majority Op. at 919. The majority‘s analysis is strikingly similar to that prescribed by the CIT in Duferco Steel, Inc. v. United States, 146 F.Supp.2d 913, 921–22 (Ct. Int‘l Trade 2001). There, the CIT stated:
In determining whether a particular product is within the scope of an [antidumping] or [countervailing duty] order, Commerce must first consider whether the underlying petitions cover the product. If the petitions are ambiguous, Commerce must examine the preliminary and final determinations, prior notices of initiation, and any available ITC publications. If the scope of the particular product is still unclear, Commerce must look to other criteria, including an analysis of the [ (k)(2) criteria].
Id. (internal quotation marks and citations omitted). This court reversed the CIT, holding the CIT‘s “description of this interpretive process has it exactly back-
Even more concerning is the majority‘s refusal to defer to Commerce‘s expertise. This court has emphasized that “scope orders must necessarily be written in general terms, and [Commerce] enjoys substantial freedom to interpret and clarify its antidumping orders, in accordance with the methodology set forth in its regulation,
Although it is apparent in hindsight that such a specific definition would be helpful in resolving this dispute, Commerce had no obligation to provide a “technical specification for MAC bricks.” Id. Section 351.225(a) instead provides that “the descriptions of subject merchandise contained in [Commerce‘s] determinations must be written in general terms.”
The majority states that Commerce‘s earlier decisions “cannot ... operate to create ambiguity ... in the underlying investigations,” even though Commerce‘s decisions and the underlying investigations are both (k)(1) sources. Id. at 921. Ambiguity in any of the (k)(1) sources likely means they are not dispositive, requiring consideration of the (k)(2) factors. See
Finally, the majority fails to defer to Commerce‘s factual findings. For example, the majority finds “the terms [MCB] and [MAC brick] are ubiquitous and well-understood in the refractories industry,” Majority Op. at 921, a finding necessary to support its conclusion that Resco‘s purported disclaimer of MAC bricks unambiguously removed Fedmet‘s merchandise from the Orders’ scope. That finding, however, directly conflicts with Com-
Because I would affirm the CIT‘s decision upholding Commerce‘s scope ruling, I respectfully dissent.