21 Ct. Int'l Trade 71 | Ct. Intl. Trade | 1997
Plaintiffs, Murata Manufacturing Company, Ltd. and Murata Electronics North America, Incorporated
I. Background
A .The CMT Order:
In November 1984, Motorola, Incorporated (“Motorola”), an American manufacturer of cellular mobile telephones, petitioned Commerce, on behalf of the United States cellular mobile telephone industry, to initiate an antidumping investigation of CMTs manufactured in Japan, as well as all mobile transceivers or kits of components and subassemblies manufactured in Japan for use in the final assembly of CMTs. The subassemblies for which Motorola requested relief were identified as “multiple subassemblies or a large combined-function subassembly representing a substantial portion of a CMT or the CMT transceiver * * * exported by Japanese manufacturers * * * to a U.S. subsidiary.” (Letter from Motorola to the Department Of Commerce of 2/21/95, at 6-7, reprinted in App. to Ericsson’s Comm, in Opp’n to Remand, (“Ericsson’s App.”) at tab 2). Motorola’s letter also noted Motorola “is aware of no
Subsequent investigations by Commerce established that CMTs and CMT subassemblies from Japan were being sold in the United States at less than fair value (“LTFV”). See Cellular Mobile Telephones and Sub-assemblies from Japan; Final Determination of Sales at Less Than Fair Value, 50 Fed. Reg. 45,447 (Dep’t Comm. 1985) (final determ.). Additionally, the United States International Trade Commission (“ITC”) determined sales of those products were materially injuring a United States industry. See Cellular Mobile Telephones and Subassemblies Thereof From Japan, USITC Pub. 1786, Inv. No. 731-TA-207 (Final) (Dec. 1985) (ITC Final Report). Accordingly, Commerce issued an antidump-ing order encompassing CMTs, CMT transceivers, CMT control units, and certain subassemblies thereof. See Antidumping Duty Order: Cellular Mobile Telephones and Subassemblies From Japan, 50 Fed. Reg. 51,724 (Dep’t Comm. 1985) (“CMT Order”).
Commerce defined the scope of the term “subassemblies” in the CMT Order as follows:
Subassemblies are any completed or partially completed circuit modules, the value of which is equal to or greater than five dollars, and which are [sic] dedicated exclusively for use in CMT transceivers or control units. The term “dedicated exclusively for use” only encompasses those subassemblies that are specifically designed for use in CMTs, and could not be used, absent alteration, in a non-CMT device.
CMT Order, 50 Fed. Reg. at 51,725 (emphasis added). Thus, the CMT Order defined a subassembly falling within the scope of the CMT Order as one satisfying a three-part definition: the subassembly (1) must be a completed or partially completed circuit module; (2) must have a value equal to or greater than five dollars; and (3) must be dedicated exclusively for use in CMT transceivers or control units, only encompassing those subassemblies that are specifically designed for use in CMTs, and could not be used, absent alteration, in a non-CMT device. Commerce explained an importer would have to file a declaration with the United States Customs Service (“Customs”) to the effect that a particular CMT subassembly was not dedicated exclusively for use in CMTs or that the dollar value was less than five dollars if it wished it to be excluded from the CMT Order. CMT Order, 50 Fed. Reg. at 51,725. The scope of the CMT Order has been challenged in other proceedings before this Court
B. Scope Ruling I:
On January 4,1986, Murata filed a request for a scope ruling seeking a determination that eleven specific components
Murata challenged Scope Ruling 7 in a consolidated action before this Court. Plaintiffs, including Murata, argued Scope Ruling I improperly altered the scope of the CMT Order in a manner inconsistent with its original terms. This Court agreed and held Scope Ruling I unlawfully expanded the scope of the CMT Order. See Ericsson GE Mobile Communications Inc. v. United States, 17 CIT 571, 578-79, 825 F. Supp. 1085, 1091 (1993) (Ericsson I), aff’d in part, vacated in part, and remanded, 60 F.3d 778 (1995) (Ericsson III). Specifically, this Court held in Ericsson I that Commerce impermissibly expanded the scope of the original CMT Order by changing the third element of its definition of covered subas-semblies, the “dedicated exclusively for use” element, to require importers to show: (1) their products are “actually used” in a non-CMT product; (2) the actual alternative use occurs in the United States subse
While this Court found Commerce unlawfully expanded the “dedicated exclusively for use” element of the definition of subassemblies covered by the CMT Order in Ericsson I, the Court did not reach plaintiffs’ argument that Commerce also had abandoned the first part of the definition — that subassemblies falling within the scope of the Order must be “completed or partially completed circuit modules” — and substituted a new test requiring inquiry as to whether the component was necessary to perform a function of the CMT or contribute to a function necessary for a CMT. Ericsson I, 17 CIT at 578, 825 F. Supp. at 1091.
Additionally, this Court in Ericsson I did consider plaintiffs’ argument that Commerce unlawfully expanded the scope of the CMT Order to cover independently-traded subassemblies without first determining whether independently-traded components were within the “class or kind” of merchandise covered by the Order. See Ericsson 1,11 CIT at 582-83, 825 F. Supp. at 1094. Plaintiffs argued Commerce limited its original analysis to related in-house subassemblies in the Final Determination, and thus did not decide the independently-traded components issue. See Ericsson I, 17 CIT at 582, 825 F. Supp. at 1094. The Court found the language in the Final Determination supported plaintiffs’ arguments, stating
before Commerce concludes in further scope rulings based on the Order at issue that independently traded subassemblies are the “same class or kind” of merchandise covered by the Order, it must first apply the same factors it applied to in-house subassemblies in the Final Determination.
Ericsson I, 17 CIT at 583, 825 F. Supp. at 1094.
C. Scope Ruling II:
In January 1992, prior to this Court’s decision in Ericsson I, Murata initiated a second scope request asking Commerce to find Murata’s electronic components outside the scope of the CMT Order on the grounds that
(i) Murata’s independently-traded components are not the same “class or kind” of merchandise as complete CMTs, (ii) Murata’s components are not “circuit modules,” and therefore not “subas-semblies” within the meaning of the CMT Order, and (iii) Murata’s*76 components as a whole are not “dedicated exclusively for use” in CMT transceivers or control units.
Murata Manufacturing Co., Ltd. and Murata Electronics North America, Inc. v. United States, 908 F. Supp. 978, 981 (CIT 1995) (Murata) (quoting Pis.’ Br. in Supp. of Mot. for J. Upon Agency R. (“Pis.’ Br.”) at 13 (footnote omitted)) OnMarch31,1992, Commerce ruled on Murata’s second scope request by expressly relying on its findings in Scope Ruling I and responding that Murata “ ‘has provided no new information to support its argument that its components should be excluded from the order. Based on this, we determine that reconsideration of the decision is unwarranted and a scope inquiry is unnecessary. ’ ” Murata, 908 F. Supp. at 981 (quoting Final Scope Ruling on the Request By Murata for Clarification of the Antidumping Duty Order on Cellular Mobile Telephones and Subassemblies From Japan (date stamped Mar. 31, 1992) (Scope Ruling II). On December 9, 1994, plaintiffs moved for judgment upon the agency record, appealing the second scope determination.
On November 22,1995, this Court reviewed Commerce’s determination with respect to Murata’s second request for a scope inquiry and held
the inclusion by Commerce of Murata’s independently-traded components within the scope of the CMT Order without first applying the same factors Commerce applied to in-house subassemblies in the Final Determination to determine if the independently-traded components were within the “class or kind” of merchandise covered by the CMT Order is unsupported by substantial evidence on the record and is otherwise not in accordance with law.5
Murata, 908 F. Supp. at 988-89. Consistent with its decision in Ericsson I, this Court ruled in Murata that Commerce improperly concluded Mu-rata’s independently-traded subassemblies were within the “class or kind” or merchandise covered by the CMT Order. The Court held that prior to reaching such a determination, Commerce must apply the same factors it used in analyzing in-house subassemblies in the Final Determination to the independently-traded components at issue in Murata’s scope ruling request. Specifically, the Court held Commerce must consider: (1) the independently-traded components’ general physical char
On December 18,1995, this Court also remanded the Ericsson litigation. See Ericsson O.E. Mobile Communications Inc., v. United States, Court No. 91-09-00703 (CIT Dec. 18,1995) (order remanding proceeding to the Department of Commerce) (Ericsson Remand). In this remand order, the Court directed Commerce to apply the Diversified Products criteria to Murata’s eleven independently-traded components subject to the underlying scope determination, and thereby determine whether they were in the same “class or kind” of merchandise as that covered by the CMT Order. Additionally, the Court ordered the Department to review its determination that the eleven components were “circuit modules” within the meaning of the CMT Order. Finally, the Court ordered Commerce to reconsider and reapply the “dedicated exclusively for use” test contained in the CMT Order with respect to nine components that were the subject of Ericsson I, in light of the CAFC’s opinion in Ericsson III and those portions of the Court’s opinion in Ericsson I, if any, which were not appealed.
D. The Remand Determination:
Following discussions among all parties to the litigation and this Court, the two cases were consolidated and Commerce issued a single, consolidated remand determination. In the course of its remand investigation, Commerce requested and received initial comments and factual information from interested parties, as well as rebuttal comments. Commerce issued its preliminary remand results in two parts. It issued preliminary remand results of its Diversified Products analysis on May 14,1996, and the second portion of its preliminary remand results, concerning the “circuit module” and “dedicated exclusively for use” issues on May 20,1996. Commerce issued its final remand results on June 17, 1996.
In reaching its determination, Commerce compared Murata’s independently-traded subassemblies with in-house subassemblies to determine whether the independently-traded components were a different “class or kind” of merchandise than that covered by the CMT Order. Fi
II. Contentions of the Parties
A. Plaintiffs:
(1) Diversified Products Analysis
Plaintiffs argue Murata is not a CMT producer nor related to a CMT producer and that Murata sells its independently-traded subassemblies to CMT producers in arms-length transactions. As a result, Murata claims its subassemblies are not the same “class or kind” of merchandise as the CMTs covered by the CMT Order.
Plaintiffs argue Commerce erroneously applied the Diversified Products criteria by comparing Murata’s independently-traded components to in-house subassemblies and not to complete CMTs which Commerce used in performing its original antidumping pricing comparison. Plaintiffs claim only merchandise of the same “class or kind” as complete CMTs can properly be brought within the scope of the CMT Order. According to plaintiffs, when CMTs are compared to Murata’s independently-traded components under each of the Diversified Products factors, Commerce’s determination is not supported by substantial evidence on the record and is not otherwise in accordance with law. Murata adds Commerce’s determination cannot be sustained “even on the basis of its own limited comparison with in-house subassemblies.” (Murata’s Comm, in Opp’n to Remand (“Murata’s Comm.”) at 6.)
Addressing each element of the Diversified Products analysis specifically, Murata first argues its independently-traded components share no physical characteristics with complete CMTs. Second, Murata contends that unlike in-house subassemblies, the ultimate purchaser of Murata’s independently-traded subassembly is not a consumer purchasing a CMT but rather an Original Equipment Manager (“OEM”) — the first unrelated party to buy Murata components other than for resale — whose expectations differ from those individuals purchasing CMTs. Third, Murata argues only in-house subassemblies move in the same channels of trade as do complete CMTs. Murata asserts its independently-traded components are sold on the open market and to
Finally, Murata points to the general purposes of the antidumping laws in the United States and argues its independently-traded components do not compete with and are not substitutable for CMTs. Murata asserts independently-traded components enter the stream of commerce in the United States as components, not as finished CMTs, “and pose no competitive threat to U.S. CMT manufacturing operations* * *. The LTFV Determination itself recognized that subassemblies having no adverse competitive impact on U.S. CMT manufacturers should be excluded — a point Commerce completely overlooks.” (Murata’s Comm, at 22-23.) Plaintiffs contend Commerce’s position contravenes the intent of the CMT Order, which was designed to protect the commercial interests of domestic CMT manufacturers such as Ericsson. According to Murata, “Commerce’s new found belief that the difference between the sale of components among unrelated parties and the transfer of a subassembly in-house by a CMT manufacturer is insignificant is controverted by the purpose of the antidumping law and the CMT Order and is thus unreasonable.” (Murata’s Comm, at 14.) Plaintiffs conclude by asserting a determination in this case that Murata’s independently-traded components are the same “class or kind” of merchandise as finished CMTs would serve as a precedent to expand the scope of all existing antidumping orders covering finished goods to include their independently-traded constituent components.
(2) Circuit Module Analysis:
Murata argues Commerce should reconsider its “circuit module” analysis and find Murata’s independently-traded components are not “completed or partially completed circuit modules” within the meaning of the CMT Order. Plaintiffs explain Commerce and the ITC deliberately used the term “circuit module” to restrict the scope of the CMT Order to major subassemblies which could be easily replaced and snapped together to form a complete CMT, and did not intend to include the discrete electronic components at issue. Murata contends the “contributes to any CMT function” test applied by Commerce in determining whether an electronic component constitutes a circuit module is an unreasonable interpretation of the term “circuit module,” and is unsupported by record evidence or any accepted meaning of the term within the electronics industry.
Plaintiffs argue Commerce should clarify the CMT Order’s phrase “could * * * be used” to mean “potential use” and not actual use in a non-CMT device. Murata claims the CAFC’s opinion in .Ericsson, III does not require there be demonstrated actual use in an existing non-CMT product to hold the product outside the scope of the CMT Order, but only that it would be reasonable to “require some existing use to which the product could realistically be put.” (Murata’s Comm, at 27 (quoting.Ericsson III, 60 E3d at 782) (emphasis partially omitted).) Murata contends a requirement of actual demonstrated use is inconsistent with the CMT Order’s requirement that importers declare upon its entry that merchandise is not dedicated exclusively for use in CMT transceivers or control units. Murata claims at the time of importation it has no way of knowing all of the ways in which its customers will actually use the components. The only knowledge Murata has is of the component’s potential use. (Murata’s Comm, at 28.) Finally, plaintiffs argue if the Court determines an “actual use” standard is the applicable test, the decision should only be applied prospectively, “since a bright line actual use test constitutes a new interpretation of the scope of the CMT order.” (Ericsson’s Comm, in Opp’n to Remand (“Ericsson’s Comm.”) at 23.)
B. Defendant & Defendant-Intervenor:
(1) Divei'sified Products Analysis
The United States andMotorola (collectively “defendants”) argue the correct question under the Diversified Products analysis is whether Mu-rata’s subassemblies differ from the in-house subassemblies referred to in the CMT Order, and not whether they share characteristics with complete CMTs.
First, Motorola argues Murata presented no evidence or argument that the general physical characteristics of its independently-traded components are significantly different from the general physical characteristics of in-house assemblies. Second, Motorola contends the ultimate purchaser of a CMT subassembly is a consumer who buys the CMT, even if the subassembly is first acquired and assembled into a complete CMT by an intermediate U.S. entity. Third, Motorola maintains even if CMT subassembly manufacturers are distinct from CMT manufacturers, the two do not necessarily conduct business in different channels of trade. Fourth, Motorola argues the advertising of Murata’s independently-traded components should be compared with the advertising of in-house subassemblies. With regard to the Diversified Products ultimate use criteria, Motorola contends the Murata components have a special CMT-oriented design and therefore the ultimate use of each independently-traded Murata component is, just as with in-house subassemblies, as part of a CMT.
Motorola argues Commerce determined in Murata that Murata’s independently-traded components are “subassemblies” covered by the CMT Order. Motorola quotes Commerce as observing, “essentially this same determination, involving the same types of products from the same producer, has already been * * * upheld.” (Motorola’s Comm, in Supp. of Remand (“Motorola’s Comm.”) at 13.) Motorola then concludes “[therefore, there was no reason for the Department to change its previous rulings on this issue. Similarly there is no reason for this Court to change its prior opinion.” {Id. at 13-14.) Motorola also argues “there is more than ample basis in the record” to conclude Murata’s independently-traded components are “circuit modules” and therefore “subas-semblies” “as that term is intended under the [CMT] Order.” {Id. at 14). Motorola maintains Commerce correctly relied on the final determination’s identification of VCOs and duplexers as CMT “subassemblies.” Id.
In response to Murata’s arguments about industry definition and usage, the United States asserts Commerce’s Final Scope Remand is consistent with the regulations and Commerce’s practice that “the scope of an order is to be interpreted in light of the petition, the investigation, and the determinations of the Department and the [ITC]. Where those sources suggest an interpretation of language in the scope which is at odds with how that language is used by the industry (e.g., as a limited term of art), the industry usage may not be controlling.” (Def.’s Reply to Comm, on Remand (Def.’s Comm.”) at 24-25 (citations and footnote omitted).) Motorola also notes “[g]iven that the goal of the CMT Order was not to impose complex technical requirements on the definition of ‘subassembly,’ there is no validity to Plaintiffs’ arguments that these products should be excluded because they do not meet some narrower definition of ‘module.’” (Motorola’s Comm, at 15). Finally, Motorola argues even if the definition of a circuit module chosen by plaintiffs is used, “these products meet that definition.” (Id. at 16)
(3) Dedicated Exclusively For Use Issue
Motorola argues Commerce was justified in relying on Murata’s failure to demonstrate some of its independently-traded components were used in non-CMT applications in concluding those components were dedicated exclusively for use in CMTs. (Motorola’s Comm, at 18.) Motorola notes the Federal Circuit rejected this Court’s interpretation of the phrase “could be used”to include only potential use, concluding Commerce could adopt any other lawful interpretation, including an actual use standard. (Id.) Motorola asserts the CAFC’s opinion in Ericsson III recognized the potential for circumvention of the CMT Order, should the “potential use” test become the standard, and found the Depart
the only approach that: (1) provides the Customs Service, the Department and the parties with an administratable, predictable, and meaningful basis for determination, (2) allows the CMT Order to be effective against subassemblies that are dedicated for use in CMTs and have no other reasonable commercially viable use, and (3) at the same time properly allows for exclusion of generic electronic subassemblies that are sold for multiple, non-CMT applications.
(Id at 17.) Finally, defendant argues the actual use standard, if approved by this Court, should not only be limited to prospective application, as that “would have the effect of preventing the application of this standard to the very products and entries which gave rise to the development of the standard.” (Def.’s Comm, at 20.)
III. Standard of Review
In an action challenging Commerce’s determination that imported merchandise is covered by an existing antidumping duty order, this Court will find unlawful any challenged determination that is “unsupported by substantial evidence on the record, or otherwise not in accordance with law.” 19 U.S.C. § 1516a(b)(l)(B)(i) (1994). “Substantial evidence is something more than a ‘mere scintilla,’ and must be enough reasonably to support a conclusion.” Cerámica Regiomontana, S.A. v. United States, 10 CIT 399, 405, 636 F. Supp. 961, 966 (1986) (citations omitted), aff’d, 5 Fed.Cir. (T) 77, 810 F.2d 1137 (1987).
IV Discussion
“It is well established * * * the [International Trade Administration] has the authority to clarify the scope of its antidumping duty orders. Commerce, however, may not expand the scope of such orders beyond the merchandise encompassed by the final less than fair value determinations.” Mitsubishi III, 16 CIT at 733-34, 802 F. Supp. at 458 (citations omitted). Although Commerce “enjoys substantial freedom to interpret and clarify its antidumping duty orders * * * it may not change them. ” Ericsson III, 60 F.3d at 782 (citations omitted). The question before this Court is whether Commerce’s remand determination impermissibly expands the scope of the CMT Order and is, therefore, unsupported by substantial evidence and otherwise not in accordance with law.
A. Diversified Products Analysis:
(1) Mode of Comparison
In determining whether a particular product is within the “class or kind” of merchandise described in an existing antidumping duty order, 19 C.F.R. § 353.29(i)(l) states Commerce is to take into account “[t]he descriptions of the merchandise contained in the petition, the initial investigation, and the determinations of the Secretary and the Commis
(i) The physical characteristics of the product;
(ii) The expectations of the ultimate purchasers;
(iii) The ultimate use of the product; and
(iv) The channels of trade.
19 C.F.R. § 353.29(i)(2)(i)-(iv) (1994).
Prior to ordering the remand in this matter, this Court examined the descriptions of the merchandise in the petition, the initial investigation, the determinations of the ITA and the ITC and the resulting antidump-ing duty order to determine whether independently-traded components were within the “class or kind” of merchandise described in the CMT Order. See Murata, 908 F. Supp. at 985-87. In the Murata opinion, this Court noted Commerce’s investigation initially appeared to include only those subassemblies moving between related parties, “presumably because circumvention of a CMT Order would seem especially likely in such cases.” Murata, 908 F. Supp. at 985. The opinion continued, noting
[nevertheless, there appears to be little on the record that would justify excluding subassemblies that meet the three-part definition from being within the scope of the Order merely because they were independently-traded * * *.
* * * [T]he Court finds it is not clear if Commerce meant to include independently-traded components in its investigation and subsequent Order. This is not to say that independently-traded components are not covered by the CMT Order.
Murata, 908 F. Supp. at 985-86.
Following remand, Commerce performed a Diversified Products analysis on Murata’s independently-traded components, comparing them with in-house subassemblies in order to determine whether there were differences between the two sufficient to establish the independently-
Plaintiffs argue, however, Commerce denied them due process by failing to compare independently-traded subassemblies with complete CMTs as it did in the Final Determination, “because the Department indicated to Murata that it would perform the same analysis as it did in the Final Determination, and then, without notice, performed a different analysis.” (Murata’s Comm, at 9.) Murata maintains
Commerce erred as a matter of law, and departed from the Court’s express instruction, when it performed a different analysis for Murata’s components than the analysis it performed for in-house subassemblies in the [Final] Determination * * *.
* * * * * * *
The limitation of the comparison solely to in-house subassem-blies results in unreasonable bootstrapping, and an unlawful expansion of the CMT Order * * *.
* * * Commerce must always return to the original products for which it performed its dumping analysis. By failing to do so here, Commerce erred as a matter of law * * *.
* % * * * * :]:
* * * Commerce has no legal basis for limiting its Diversified Products analysis to a subset of that class or kind of foreign merchandise.
(Id. at 4-6.) Motorola disagrees, arguing
[T]he task before the Department was to decide if Murata’s products were in the class of merchandise covered by the CMT Order. That class of merchandise specifically includes “subassemblies.”
* * * [T]his antidumping proceeding has always covered CMT subassemblies just as fully and directly as it covers complete CMTs. Such subassemblies were covered in the antidumping petition. They were in the title of the petition and a focus of the case from the outset * * *. [SJubassemblies were an original target of the anti-dumping proceeding.
(Motorola’s Comm, at 5-6 (emphasis omitted).) Commerce evaluated both arguments and held the question under Diversified Products was whether Murata’s subassemblies were different from those subassem-blies referred to in the CMT Order. Commerce’s remand determination stated this issue
can only be reached by comparing the subassemblies that are the subject of this scope inquiry to in-house subassemblies that are*85 clearly covered by the order. Mitsubishi’s statement that the comparison of Murata’s independently traded components to in-house subassemblies would unfairly expand the scope of the order because in-house subassemblies were not included in the investigation is incorrect. In-house subassemblies were included in the scope of the investigation * * *.
Final Scope Remand at 6.
This Court finds Motorola’s arguments persuasive and Commerce’s analysis proper. The Court’s remand in Murata directed the Department to apply the same factors to the independently-traded components as it applied to in-house subassemblies. The Department followed the Court’s mandate. This Court did not specifically direct Commerce to compare independently-traded components with complete CMTs. As the CAFC stated in Ericsson III, Commerce has “broad discretion” to “administer the antidumping duty program.” Ericsson III, 60 F.3d at 783. Accordingly, this Court finds Commerce’s comparison is supported by substantial evidence on the record and is otherwise in accordance with law.
The Court will now turn to the question of whether Commerce’s application of each of the Diversified Products factors is supported by substantial evidence on the record and is otherwise in accordance with law.
(2) Diversified Products Criteria
a. General Physical Characteristics
The first Diversified Products criteria at issue is whether there are differences in the physical characteristics of Murata’s independently-traded components and in-house subassemblies. Murata argues the CMT Order’s lack of any clear physical description defining the subas-semblies intended to be covered makes it impossible to compare Mura-ta’s independently-traded components with in-house subassemblies. After examining the information placed on the record by Murata, consisting of the name and a general description of each Murata subassem-bly at issue, Commerce disagreed with Murata’s position, stating
given that Murata uses the same terms to describe its components (for example; duplexers) and the evidence on the record does not suggest that Murata’s components perform different functions from similarly identified in-house subassemblies, we cannot conclude that the general physical characteristics of Murata’s components differ significantly from those of in-house subassemblies.
Final Scope Remand at 7.
Murata, while presumably knowing the facts pertaining to the physical characteristics of its independently-traded components, failed to provide sufficient evidence to convince Commerce that the general physical characteristics of its independently-traded components are significantly different from the general physical characteristics of in-house subassemblies. This Court is not persuaded that Murata has produced sufficient evidence to justify this Court in overturning Commerce. This
b. The Expectations of the Ultimate Purchasers:
Murata argues the ultimate purchasers of its subassemblies are not CMT consumers but rather the Original Equipment Managers, the first unrelated purchasers to buy the goods other than for resale. Murata claims its products are intermediate goods, separately sold to unrelated purchasers and used in further manufacture, unlike complete CMTs which are purchased by consumers with different expectations.
On remand, the Department reasoned “[i]n a Diversified Products analysis, which calls for analysis of the expectations of the ultimate purchasers, the sale to the first unrelated party does not necessarily define the ultimate purchaser.” Final Scope Remand at 9. Commerce determined the expectations of the ultimate purchasers of CMTs and Murata’s subassemblies are the same, because Murata’s “dedicated-exclusively-for-use-in-CMTs” subassemblies by definition are used only in complete CMTs and by definition could not be used in a non-CMT device. Commerce noted that although Murata claimed its components were sold to a variety of unrelated OEMs for use in a wide variety of electronic components, “Murata provided no evidence of such widely varied uses for the components that are dedicated exclusively for use in CMTs. ” Final Scope Remand at 10 n.2. Therefore, according to Commerce, “the purchase of the CMT subassembly by the OEM is an intermediate step. The ultimate purchaser of the CMT subassembly is always the purchaser of the complete CMT, because the CMT subassembly, by definition, is not used in any other product.” Id. at 9.
Because Commerce limited its analysis to Murata’s independently-traded components which are “dedicated exclusively for use” in CMTs and because Murata did not present sufficient evidence of widely-varied
c. The Channels of Trade in Which the Product is Sold:
Murata asserts its independently-traded products move in a different channel of trade than finished CMTs because the independently-traded components are sold on the open market to unrelated OEMs — a market to which CMT consumers have no access. In the final scope determination, Commerce determined in-house subassemblies move in the same channels of trade as complete CMTs because they are not “‘traded’ except to the extent they are sold after they have been used in CMT production.” Final Scope Remand at 10 (citing Final Determination, 50 Fed. Reg. at 45,448). Motorola argues the independence of a CMT subas-sembly manufacturer from a CMT manufacturer does not necessarily result in differences in the channels of trade in which their products are sold.
The Department’s practice when defining channels of trade is to “examine the type of customer to which the merchandise is sold.” Final Scope Remand at 11. Seee.g., Certain Cased Pencils from thePRC; Final Determination of Sales at Less Than Fair Value, 59 Fed. Reg. 55,625 (Dept. Comm. 1994); Final Determination of Sales at Less Than Fair Value;Certain Carbon and Alloy Steel Wire Rod from Brazil, 59 Fed. Reg. 5,984 (Dept. Comm. 1994). In comparing the channels of trade in which in-house subassemblies and Murata’s independently-traded subassem-blies “dedicated exclusively for use in CMTs” are traded, Commerce concluded both subassemblies at issue were transferred from the component manufacturer to an OEM, and from an OEM (in the form of a CMT) to the ultimate CMT purchaser.
d. The Manner in Which the Product is Advertised and Displayed:
Neither Murata nor Ericsson challenge the Department’s determination that “ [t] he evidence on the record demonstrates that Murata’s components are advertised and displayed differently from in-house CMT subassemblies.” Final Scope Remand at 13'. In its original scope request, Murata submitted product brochures that described the technical specifications of separate CMT components — information designed to appeal to OEMs. This Court finds Commerce’s conclusion that “many, but not all, of Murata’s subassemblies are advertised differently from in-house subassemblies,” Final Scope Remand at 14, is supported by substantial evidence on the record and is otherwise in accordance with law.
e. The Ultimate Use of the Merchandise in Question:
Murata argues the ultimate purchasers of its components are OEMs, and therefore asserts the ultimate use of its components is in the manufacture of CMTs, not as a CMT. Murata considers the actual use of the intermediate components and compares the components to complete CMTs, arguing “ [n] o one could ever make a telephone call on a Mu-rata duplexer, VCO, active filter, single filter, paired filter, or isolator.” (Murata’s Comm, at 16-17.) Motorola, however, argues a Murata du-plexer is designed exclusively for use in a CMT and has the same ultimate use as a duplexer made in-house by a CMT manufacturer.
Commerce explained the analysis of the ultimate use of the merchandise in question turns on the identity of the ultimate purchaser. The Department stated,
the fact that Murata sells its components to unrelated parties does not make the first unrelated purchaser the ultimate purchaser, and therefore does not dictate the products’ ultimate use * * *. Mura-ta’s components are dedicated exclusively for use in CMTs; therefore, there is no other use for them. Thus, the ultimate use of*89 Murata’s independently traded subassemblies, which are dedicated exclusively for use in CMTs, is the same as for in-house subassem-blies.
Final Scope Remand at 15. The Court finds this conclusion is supported by substantial evidence on the record and is otherwise in accordance with law.
In sum, the Court holds Commerce’s application of the Diversified Products criteria was undertaken properly and within Commerce’s discretion. This Court upholds Commerce’s conclusion that Murata’s sub-assemblies which are dedicated “exclusively for use” in CMTs are the same “class or kind” of merchandise as that covered by the CMT Order. This Court notes Commerce’s conclusion that “[ajlthough, the manner in which the product is advertised and displayed differs from the merchandise subject to the CMT order, this factor alone is not dispositive with regard to the analysis of whether Murata subassemblies dedicated exclusively for use in CMTs are covered by the scope of this order, ” Final Scope Remand at 33, and finds the determination of Commerce is supported by substantial evidence on the record and is otherwise in accordance with law.
B. Whether Murata’s Subassemblies are Circuit Modules:
The CMT Order defines a subassembly as “any completed or partially completed circuit modules, the value of which is equal to or greater than five dollars, and which are [sic] dedicated exclusively for use in CMT transceivers or control units.” CMT Order, 50 Fed. Reg. at 51,725 (emphasis added). This language indicates the “circuit module” test is a separate and necessary requirement for the inclusion of a component within the scope of the CMT Order.
In Scope Ruling II, Commerce summarized its findings in Scope Ruling I by stating, in relevant part, “components that contribute to any CMT function are partially completed circuit modules and therefore are subassemblies covered by the order.” Scope Ruling II at 2 (emphasis added). Subsequently, in Murata, this Court noted while the language of Scope Ruling II added a gloss to the definition of subassemblies as expressed in the Final Determination, it did not mark an unlawful expansion of the CMT Order. Instead, this Court held the inclusion of the clarifying language in Scope Ruling II was a permissible clarification of the CMT Order, which adequately restricted the CMT Order to include only those subassemblies satisfying the three part definition. As a result, this Court held in Murata, “Commerce’s interpretation of what components constitute a ‘partially completed circuit module’ is well-within the agency’s discretion to adopt.” Murata, 908 F. Supp. at 988. Similarly, this Court and the CAFC upheld this broad coverage of subas-semblies in the CMT Order in Mitsubishi Electric Corp. v. United States, 12 CIT 1025, 1049-50, 700 F. Supp. 538, 557-58, aff’d, 898 F.2d 1577, 1582 (Fed. Cir. 1990). Notwithstanding this Court’s ruling in Murata, in its order remanding the Ericsson case, this Court instructed Commerce
While the term “circuit module” is not defined in the CMT Order, in Scope Ruling I the Department clarified the definition of subassemblies covered by the CMT Order and explained it did not want to limit coverage to specific subassemblies
[bjecause of the difficulty presented in identifying each component to be covered by name, the Department constructed the definition of a subassembly in such a way as to capture within the scope of the order those circuit modules which perform basic CMT functions * * * Partially completed circuit modules cannot perform basic CMT functions themselves, but they do contribute to the basic function of CMTs and therefore, are included in the order.
Final Scope Remand at 17 (quoting Scope Ruling I at 9) (emphasis added). Commerce stated a subassembly which met the other two requirements of the definition of covered subassemblies (the five-dollar limitation and the “dedicated exclusively for use” test) and which “performs a function or contributes to the performance of a CMT function would fulfill the Department’s definition of a covered CMT subassem-bly.” Scope Ruling I, at 9 (emphasis added). In this way, Commerce explained its definition of a subassembly covered by the CMT Order was not unlimited and ensured subassemblies used in non-CMT applications would not be included in the Order.
Although plaintiffs acknowledge Commerce’s interpretation of a circuit module is consistent with the Court’s holding in Murata, plaintiffs argue the Murata decision is neither binding nor persuasive here. (Mu-rata’s Comm, at 38) Plaintiffs claim the Department should reconsider its circuit module analysis and find Murata’s independently-traded components are not “completed or partially completed” circuit modules within the meaning of the CMT Order. Plaintiffs contend the language is overly broad, asserting “since every electrical circuit in a CMT contributes to the performance of a CMT function — otherwise it would not need to be there— Commerce’s ‘contributes to a CMT function’ test is in fact no test at all.” (Murata’s Comm, at 35.)
While plaintiffs’ arguments on this issue are interesting, the Court finds Commerce’s definition of a circuit module will not, as plaintiffs claim, result in sweeping coverage of all components within the scope of the CMT Order. Commerce’s definition limits the CMT Order’s coverage to components that contribute to basic CMT functions and also meet the other criteria required by the CMT Order, such as the five dollar limitation. This Court and the CAFC have previously ruled the language of the CMT Order adequately restricted coverage of circuit modules to sub-assemblies whose circuits performed CMT functions. See Murata, 908 F. Supp. at 988; Mitsubishi, 898 F.2d at 1584. While Commerce acknowledged the ITC focused its investigation on subassemblies that performed seven basic functions and attached to the CMT transceiver in a particular way, Commerce also determined that even though the ITC did not address components that “contribute to the function” of a CMT in its injury analysis, the Department was within its powers to include such components within the scope of the Order,
This Court upholds Commerce’s finding that each of the eleven components subject to the remand contribute to a basic CMT function. As defendant-intervenor pointed out, Murata itself admitted “Murata components (such as VCOs, isolators, or filters — including duplexer fil
C. Whether Murata’s Subassemblies are “Dedicated Exclusively for Use” in CMTs:
The third element of the definition of subassemblies covered by the CMT Order requires subassemblies to be “any completed or partially completed circuit modules * * * which are dedicated exclusively for use in CMT transceivers or control units.” CMT Order, 50 Fed. Reg. at 51,725 (emphasis added). The phrase “dedicated exclusively for use” is subsequently defined in the CMT Order as “encompassing] those sub-assemblies that are specifically designed for use in CMTs, and could not [be] used, absent alteration, in a non-CMT device.” Id. (emphasis added). In Ericsson I, plaintiffs asserted with respect to Scope Ruling I, Commerce interpreted the “could not be used” phrase in the “dedicated exclusively for use” definition as requiring (1) actual, demonstrated use in a non-CMT device; (2) that such use be commercially available; and (3) that the non-CMT use be subsequent to importation to the United States. Upon reviewing each of these requirements, this Court found Commerce’s interpretation of the “could not be used” phrase was an unlawful expansion of the scope of the CMT Order and not simply a clarification of its language. See Ericsson 1,17 CIT at 578-81, 825 F. Supp. at 1090-93.
In Ericsson III, the CAFC agreed and held Commerce’s requirement of commercial availability and of non-CMT use in the United States went beyond a mere clarification of the CMT Order. The CAFC, however, disagreed with this Court’s conclusion that the “could * * * be used” language could only refer to potential use. The Federal Circuit’s opinion stated
it was not unreasonable for the Commerce Department to interpret the antidumping duty order to exclude products that were used as*93 CMT subassemblies only upon proof that the products had some other actual use; the phrase “could * * * be used” is not necessarily limited to any conceivable, hypothetical use, but can reasonably be interpreted to require some existing use to which the product could realistically be put. An “actual use” interpretation would also be consistent with the purpose of the antidumping duty order — to apply the antidumping duty to products that are being imported solely for use in CMTs. Thus, one fair construction of the phrase “could * * * be used” is that a particular item “could” be used in a non-CMT device only if there is an actual use for it in such a product.
Ericsson III, 60 F.3d at 782. The CAFC held this Court should not have entered final judgment for the plaintiffs on the record before this Court. Id. at 783. As a result, the CAFC reversed this Court’s ruling with respect to the “could * * * be used” language and remanded the proceeding, directing this Court to remand the issue to Commerce to allow Commerce another opportunity to interpret the CMT Order “according to any of its legally acceptable options.” Id. This Court did so and instructed Commerce to reconsider and reapply the “dedicated exclusively for use” test contained in the antidumping duty order not inconsistently with Ericsson III and with those portions of Ericsson I not appealed, if any, with respect to the nine components that were the subject of Ericsson I.
In the Final Scope Remand, Commerce fulfilled this Court’s mandate and reviewed and reevaluated the “potential use” standard, as well as the CAFC’s holding xaEricsson III and the evidence on the record. Commerce declined to adopt a potential use standard as advocated by plaintiffs. Instead, Commerce determined a CMT subassembly is dedicated exclusively for use in a CMT and could not be used, absent alteration, in a non-CMT device, thus satisfying the CMT Order’s requirements
unless a party provides evidence of actual use in a non-CMT device. While the non-CMT device need not be commercially available, when the evidence of the non-CMT use presented to the Department suggests that the use may be contrived solely for purposes of seeking an exclusion from the scope of the order, the Department will consider the commercial availability of the non-CMT device in its determination.
Final Scope Remand at 28.
This Court holds Commerce’s test for determining which subassem-blies are “dedicated exclusively for use” in CMTs is supported by substantial evidence on the record and is otherwise in accordance with law. The CAFC explicitly disagreed with this Court’s determination that the “could * * * be used” language could only refer to potential use and stated “it was not unreasonable for the Commerce Department to interpret the antidumping duty order to exclude products that were used as CMT subassemblies only upon proof that the products had some other actual use. ” Ericsson III, 60 F.3d at 782. The CAFC explicitly stated this Court’s interpretation of the CMT Order was “not necessarily the only
Accordingly, this Court finds a component which cannot be used, absent alteration, in a non-CMT device is “dedicated exclusively for use” in a CMT unless a party provides evidence of the components’s actual use in a non-CMT device. While the non-CMT device need not be commercially available, when the Department acquires evidence suggesting the use may be contrived solely for purposes of seeking an exclusion from the scope of the CMT Order, the Department may consider the commercial availability of the non-CMT device in its determination of whether the subassembly could realistically be used in a non-CMT product.
Based on Commerce’s application of the lawfully-adopted actual use standard to the information placed in the record by plaintiffs, the Department determined four of the nine products at issue in Ericsson I were “dedicated exclusively for use” in CMTs and thus were within the scope of the CMT Order. The CMT Order places the burden of proof on Murata to prove there is a valid non-CMT use for a component “absent alteration. ” The evidence placed on the record by Murata does not demonstrate its components actually are used in non-CMT devices. Evidence of similarities between Murata’s components and virtually identical next-generation components which have actual non-CMT uses does not satisfy the explicit requirement that to be excluded from the CMT Order, the Murata component itself must be used “absent alteration, in a non-CMT device.” CMT Order, 50 Fed. Reg. at 51,725 (emphasis added). Indeed, Murata itself admitted it had no evidence as to how several of the components were actually used. (See App. to Murata’s Comm, in Opp’n Remand, tab E at 48-50.) Further, other evidence cited by Murata, such as the ITC statement in the original antidumping investigation that duplexers and VCOs are not used exclusively in CMTs, only demonstrates potential and not actual use of its components in non-CMT devices. ITC Final Report at A-7, n.3. As a result, this Court finds Murata has not shown the specific components at issue in this proceeding are actually used, absent alteration, in non-CMT devices. This Court will examine each of the components in turn.
D. Revaluation of the Subassemblies at Issue:
The Department examined both Murata’s claims its subassemblies at issue were similar to next-generation models that had non-CMT uses, as
(1) VCO MQC013-835
Murata claims Commerce ignored record evidence as to the actual differences and similarities between VCO MQCO13-835 and VCO MQC007-835 which, according to Murata, is sold for measuring equipment, among other purposes. In a letter dated July 24,1991, which was submitted to “provide evidence of possible uses, absent alteration, of the VCO,” Murata’s Manager of Product Development, Department II, Functional Device Division, asserts VCO MQC013-835 “which was sold in the mid-1980’s, is very similar to MQC007-835, which is a VCO sold currently [as of 1991] for measuring equipment, among other purposes.” (App. to Pis.’ Joint Resp. to Ct.’s 10/31/96 Letter (“App. to Joint Resp.”), tab 4 at 1.) Murata argues VCO MQC013-835 could have been used for the same actual non-CMT device as VCO MQC007-835. Commerce, however, determined the record did not provide evidence as to whether the basis for the non-CMT use of VCO MQC007-835 was the characteristics common to VCO MQC013-835 or other characteristics unique to VCO MQC007-835. Commerce explained that although the diagrams and specifications attached to Murata’s letter revealed differences in the electrical characteristics of the two VCOs, “Murata has provided no explanation of these differences or their significance with respect to the ability to use the MQC013-835 VCO in the measuring equipment application absent the alterations in electrical characteristics.” Final Scope Remand at 31. Therefore, the Department held VCO MQC013-835 to be a circuit module within the scope of the CMT Order.
(2) DFC6R883P026BTM:
Murata also claims it provided evidence of actual non-CMT use with regard to single filter DFC6R883P026BTM in a letter dated July 24, 1991 from the Manager of the Product Engineering Department, Microwave Component Group, Functional Device Division. Murata argues the uncontroverted record evidence reflects this single filter was only
(3) DFC6R838P026BTM:
With respect to DFC6R838P026BTM, Murata argued in a July 24, 1991 letter to Commerce from the Manager, Product Engineering Department, Microwave Component Group, Functional Device Division, that “AT&T is using a very similar part, DFC835P025BTR for the receiver of the AMPS base station made by AT&T which is commercially available in the U.S. * * * [BJecause of the great similarities, DFC6R838P026BTM could be used in a base station which is a non-CMT device.” (App. to Joint Resp., tab 13 at 2.) Murata also argued this single filter was only sold to Motorola in small quantities for evaluation purposes. Once again, Commerce concluded the specifications submitted by Murata revealed differences in the electrical characteristics of the two components and Murata “provided no explanation of these differences or their significance with respect to the ability to use the DFC835P025BTR filter in the AMPS base station application absent the alterations in electrical characteristics.” Final Scope Remand at 33. The Department again held it could not determine whether the basis for that filter’s non-CMT use was characteristics in common to DFC6R838P026BTM or other characteristics unique to DFC835P025BTR. As a result, Commerce determined the filter was a subassembly within the scope of the CMT Order.
(4) DFY3R784CR835B:
Finally, with respect to DFY3R784CR835B, Murata submitted a letter to the Department dated July 24, 1991 from the Manager of the Product Engineering Department, Microwave Component Group, Functional Device Division, claiming the duplexer “could be used in pocket-size, self-contained, portable cellular telephones.” (App. to Joint Resp., tab 10 at 1.) Commerce, however, determined the manager’s
The Department’s determination that these four components fall within the scope of the CMT Order was reasonable and is entitled to deference by this Court. Because Commerce could not determine whether the basis for the non-CMT use of the similar next-generation components was characteristics common to the Murata components at issue or unique to the next-generation components, Commerce acted reasonably in including the four components within the CMT Order. Murata provided no other evidence of actual use in a non-CMT device for the components at issue. Accordingly, this Court finds Commerce’s remand decision as to this issue is supported by substantial evidence on the record and is otherwise in accordance with law.
V Conclusion
After carefully considering the arguments of all parties, this Court sustains the results of Commerce’s Final Scope Remand — Antidump-ing Duty Order on Cellular Mobile Telephones and Subassemblies from Japan: Murata Manufacturing Co., Ltd. (dated June 17,1996). The general physical characteristics, expectations of the ultimate purchasers, channels of trade, and the ultimate use of Murata’s independently-traded cellular mobile telephone components indicate they are of the same “class or kind” of merchandise as the CMTs covered by the anti-dumping duty order because they meet the criteria for subassemblies as defined in the CMT Order. Furthermore, the evidence placed on the record demonstrates each of Murata’s components “contributes to a CMT function” and are “completed or partially completed circuit modules” within the meaning of the CMT Order. Finally, this Court sustains Commerce’s finding that a product is “dedicated exclusively for use” in a CMT and cannot be used “absent alteration” in a non-CMT device unless a party provides evidence of actual use in a non-CMT device. Additionally, this Court sustains the Department’s consideration of the commercial availability of non-CMT devices when evidence of non-CMT use presented to the Department suggests the use may be contrived solely for purposes of seeking an exclusion from the scope of the order. With respect to the nine subassemblies relevant to the “dedicated exclusively for use” issue, this Court sustains the Department’s finding that four of the nine components are “dedicated exclusively for use” in CMTs and, therefore, are within the scope of the CMT Order. This Court also sustains the Department’s conclusion that the remaining five subas-
Schedule of Consolidated Cases
1. Matsushita Elec. Corp. of Am. and Matsushita Comm. Industrial Corp. of Am. v. United States, 91-09-00716.
2. Mitsubishi Elec. Corp. and Mitsubishi Consumer Elecs. Am. Inc. v. United States, 91-10-00721.
3. Murata Manuf. Co., Ltd. and Murata Elecs. North Am. v. United States, 91-09-00711.
4. OKI Elec. Indus. Co., Ltd. v. United States, 91-09-00718.
Murata Electronics North America was previously named Murata Erie North America, Incorporated. Murata in-dependency produces and distributes a wide range of electronic components to original equipment manufacturers— including U.S. and Japanese cellular mobile telephones (“CMT”) producers — but does not produce CMTs. (Murata’s Comm, in Opp’n to Remand (“Murata’s Comm.”) at 1.) Murata was not a party to Commerce’s less than fair value investigation, as only Japanese producers that manufacture complete CMTs were investigated. See Ericsson GE Mobile Communications Inc. v. United States, 17 CIT 571,575,825 F. Supp. 1085,1088 (1993) (Ericsson I), aff’d in part, vacated in part, and remanded, 60 F.3d 778 (1995) (Ericsson III). Ericsson is one of Murata’s customers in the United States and manufactures CMTs in the U.S. using parts and components produced by Ericsson domestically, as well as parts and components sourced by Ericsson from unrelated vendors. (Murata’s Feb. 26,1996 Comm. Concerning Remand Proceedings at 5) (reprinted in App. to Murata’s Coram. in Opp’n to Remand).
See, e.g., Mitsubishi Elec. Corp. o. United States, 16 CIT 780,802 F. Supp. 455 (1992) (Mitsubishi III), aff’d, 11 F.3d 1070 (1993); Mitsubishi Elec. Corp. v. United States, 12 CIT 1025, 700 F. Supp. 538 (1988) (Mitsubishi I), aff’d, 8 Fed. Cir. (T) 45,898 E2d 1577 (1990) (Mitsubishi II). I nMitsubishil, plaintiffs challenged, inter alia, Commerce’s decision in the Final Determination to include CMT subassemblies within the scope of the CMT Order. The Court of International Trade upheld Commerce’s determination to include discrete CMT subassemblies within the scope of the Order as a means to prevent circumvention of the Order through the importation of major CMT subassemblies. The Court of Appeals for the Federal Circuit (“CAFC”) affirmed.
InMitsubishilll, this Court held Commerce’s 1991 scope ruling unlawfully expanded the coverage of the CMT Order by requiring importers to prove their CMT subassemblies were actually employed in the production of non-CMT devices in the United States to avoid having the subassemblies deemed “dedicated exclusively for use” in CMT transceivers or control units. Mitsubishi III, 16 CIT at 737-38, 802 F Supp. at 461. The Court found no language in the CMT Order requiring such a showing and therefore held this new standard was not sustainable as a mere clarification of the CMT Order. Id. The CAFC affirmed.
Murata’s request covered the following eleven components: one triplexer, two duplexers, two voltage control oscillators (“VCOs”), four active filters and two single filters.
In Ericsson III, the CAFC affirmed this Court’s decision in Ericsson I to vacate the scope ruling and agreed Commerce impermissibly expanded the scope of the CMT Order. Ericsson III, 60 F.3d at 779. The CAFC also held, however, this Court should not have entered final judgment for plaintiffs on the record before it. Ericsson III, 60 F.3d at 783. “[T]he Commerce Department should be given another opportunity to interpret the order at issue in this case,” the CAFC explained. Id. Thus, the CAFC reversed this Court’s decision in part and remanded the case to permit Commerce “to interpret the order according to any of its legally acceptable options.” Id.
In Diversified Prods. Corp. v. United States, 6 CIT 155, 162-63, 572 E Supp. 883, 889-90 (1983), this Court reviewed the International Trade Administration’s ("ITA") application of certain criteria to determine if the merchandise under review belonged to the “class or kind" of merchandise encompassed in the dumping finding. The ITA considered: “the general physical characteristics of the merchandise, the expectation of the ultimate purchasers, the channels of trade in which the merchandise moves, the ultimate use of the merchandise, and cost.” Id. at 162,572 E Supp. at 889 (citations omitted). Upon review of the ITA’s application of these factors, the Court upheld the ITA’s “same class or kind” determination. All of these factors, except cost, have been codified at 19 C.ER. § 353.29(i)(2)(i)-(iv) since 1990 as appropriate criteria in determining whether a new product is within the “class or kind" of merchandise described in a prior antidumpingfinding when an examination of the petition, the initial investigation and the ITA and International Trade Commission (“ITC”) determinations is not dispositive on the issue.
In evaluating the purpose of the Diversified Products test, Murata’s comments on the Final Scope Remand contend
Ttlhe purpose of the antidumpinglaw is to protect U.S. manufacturers from competitive injury resulting from the importation of a “class or kind” of foreign merchandise. 19 U.S.C. § 1673. The “class or kind” of foreign merchandise thus must be limited to substitutable, competitive goods capable of affecting prices or sales of the U.S. manufacturers claiminginjury. Thus, each of theDiversificdProducts criteria facuses on substitutability and competition. Goods that are substitutable and compete with one another will share common physical characteristics, be sold in the same channels of trade, have comparable uses, satisfy the same customer expectations, andbe advertised and displayed in a similar fashion.
(Murata’s Comm, at 21-22 (footnote omitted).)
In the Final Determination, Commerce responded to arguments that the Department had no authority to include discrete subassemblies within the scope of the investigation because they were not the same “class or kind” of merchandise as completed CMTs. In the Final Determination, Commerce found subassemblies “dedicated exclusively for use” in CMTs were covered by the CMT Order. Commerce brought subassemblies within the scope of the investigation through aDiversified Products analysis that applied the five factors to in-house subassemblies, on the one hand, and to complete CMTs found by Commerce to have been dumped, on the other hand. It found, for example, that the ultimate purchasers and users of the CMT subassemblies are the same as for the complete CMTs. It also found that while subas-semblies and complete CMTs have different physical characteristics, both CMT subassemblies and complete CMTs move in the same channels of trade. Commerce concluded CMT subassemblies that are dedicated exclusively for use in CMTs are the same “class or kind” of merchandise as complete CMTs. Final Determination, 50 Fed. Reg. at 45,448.
These criteria are known as the Diversified Products criteria. See, supra, footnote 5.
In the Final Determination, with respect to the independently-traded components, Commerce stated ‘Twlhile some CMT subassemblies may be purchased by CMT manufacturers from unrelated parties, the Department has reason to believe that such separately traded items may not meet the ‘dedicated exclusively for use’ criterion, and therefore might not be covered by the scope of any order.” 50 Fed. Reg. at 45,451. Thus, the Final Determination does not explain how the Department would treat components that were “dedicated exclusively for use” in CMTs.
In support of its position, Murata cites Final Determination of Sales at Less That Tsic] Fair Value: Gran ular Polyte-trafluoroethylene Resin From Italy, 53 Fed. Reg. 26,096 (Dept. Comm. 1988) (PTFE Resin), where the Department concluded the ultimate purchasers of granular PTFE resin were U.S. fabricators who expected to further process the resin into a variety of intermediate products. Similarly, Ericsson explains its processing in the United States is not minor, “since the duplexers purchased by Ericsson from Murata constitute merely one of approximately 180 discrete parts.” (Ericsson’s Comm, at 10.)
Motorola argues a comparison to Commerce’s determination in Steel Jacks from Canada is relevant to the issue of subassemblies dedicated exclusively for use in CMTs. Final Results of Antidumping Duty Administrative Review; Steel Jacks From Canada, 52 Fed. Reg. 32,957, 32,958 (Dept. Comm. 1987) (Steel Jacks) (“[Wle determine that both the ultimate use and the ultimate purchasers of jack parts and complete jacks are the same, because jack parts are not used in any other device.”). The United States argues Murata’s reliance onPTFEResin is incorrect, because PTFE resin is a product which may be used in the production of a wide range of products and at the time of sale, is not dedicated exclusively for use in a particular application. (Def.’s Reply at 9.)
The Department determined Murata’s comparison to PTFE Resin was misplaced, as that case involved merchandise that, unlike the CMT subassembly, had multiple uses at the time it was purchased by U.S. fabricators and thus, multiple possible ultimate purchasers.
Commerce explained that although the transaction between a component manufacturer and its related OEM would be disregarded by the Department for margin calculation purposes, for scope purposes,
we find the transaction to be relevant for the limited purposes of examining the channel of trade. In both cases, the CMT purchaser at the end of this chain has no access to tne market that exists between the subassembly manufacturer and the OEM. The only difference between these two channels of trade is that in the latter chain, the component manufacturer and the OEM are related.
Final Scope Remand at 12.
Many of plaintiffs’ arguments center on the claim that Commerce was required to compare Murata’s independently-traded components to complete CMTs. The Court has already held this was not the case. See, supra, section A( 1) of Discussion (discussion on mode of comparison in Diversified Products analysis).
This argument is similar to the one advanced by plaintiffs in Murata. There, plaintiffs argued the new “contributes to a CMT function" test was so broad, “it essentially eviscerates the term ‘circuit module’ of any substantive meaning. Any component, no matter how small or minor, could be said to ‘contribute’ to a CMT function, and thus ^ * * be a ‘partially completed circuit module.”' Murata, 908 E Supp. at 983 (quotingPis.’Br. at 41) (footnote omitted).
As this Court and CAFC made clear in the Mitsubishi litigation:
The Commission’s determination that the seven “mqjor subassemblies” constituted separate products for determining whether the dumped imports injured an American industry does not mean that the Administration was required to limit its antidumping order to those seven categories of subassemblies * * *.
* * * * i< * †
* * * The Commission’s determination of like products and separate industries does not undermine the Administration’s determination that to prevent evasion the antidumping order should be broader.”
Mitsubishi, 898 E2d at 1584-85.
On October 31, this Court sent a letter to all parties requesting them to direct the Court to the pages in the record indicating the location of certain evidence referred to by the parties in support of their arguments.
Components AFC 94A001X2, AFC 911F001A1, AFC 920A001A2, and AFM 98F001A2 were found to be outside the scope of the CMT Order based on evidence that in 1985 and 1986, they would have been used in a pocket-size, self-contained, portable cellular telephone, a non-CMT device. Final Scope Remand at 31-32. As there was “no contradictory evidence on record,” Id. at 32, this Court finds Commerce’s determination to hold these subassemblies outside the scope of the CMT Order is supported by substantial evidence on the record and is otherwise in accordance with law. VCO MQC013-785 was also determined to be outside the scope of the CMT Order based on Murata’s demonstrating actual use of the component by a Japanese original equipment manufacturer in a global positioning system, a non-CMT device. Id at 31. Commerce noted “ [tlhere is no record evidence suggesting that this information is inaccurate.” Id. As a result, this Court finds Commerce’s determination with regard to this component is supported by substantial evidence on the record and is otherwise in accordance with law.