75 F. 276 | U.S. Circuit Court for the District of Massachusetts | 1896
This is a bill in equity to restrain an alleged infringement of the first claim of reissue letters patent No. 11,144, issued February 10, 1891, to William W. Crocker, for blackening and burnishing boots and shoes. The claim is as follows:
(1) The improvement in the art of polishing and finishing sole and heel edges and other parts of boots or shoes, which consists in dyeing the said parts or surfaces black and treating the said surfaces with wax or other resinous or waterproof compound and polishing the same by contact with a rapidly moving yielding surface, substantially as described.
The process in use before this invention was to blacken the leather with ink, the sediment of which was fixed to the fiber of the leather by buffing, and then, by rubbing the leather with a hard heated surface. In the use of a dye, the surface of the leather is left smooth and may be polished by an instrument having a soft, yielding surface. I do not find in the record evidence of the use of this process before the invention here patented.
It is objected that the patent does not sufficiently describe the process; and on this point the respondents strongly argue that the materials necessary to the process were not commonly known, and hence that the manner of preparing them should have been described in the patent. I have finally reached the conclusion that the materials used in the patented process were sufficiently known to those familiar with the art as it stood at the time of the invention, so that the patentee is not called on to describe the methods of preparing them. Those familiar with the art, I am persuaded,
I am of opinion, however, that the specification was, for the purpose of deceiving the public, made to contain less than the whole truth relative to the invention and hence that the patent must be held to he invalid. Rev. St. § 4920. The patentee had discovered previously to his application that the dye used should be waterproof, and that the yielding surface used in polishing should be an inflated air cushion. The use of a waterproof dye, he testifies, is “an important feature”; and as to the air cushion, he testifies that it “is necessary to he practical,” and that without this “it would not he my process.” The specification, however, contains no reference to these requirements. The necessity of a waterproof dye is hardly even suggested, and the polishing surface is described as formed of cotton cloth or chamois skin, covering a bed of “felt or any other suitable material.” Since the great importance of the waterproof quality in the dye. was well understood by the inventor, as well as the absolute necessity to his process of a certain specific yielding surface, I must hold that the purpose to deceive the public is necessarily implied from his failure even to suggest these requirements.
The hill will he dismissed with costs to the respondents.