88 F. 267 | U.S. Circuit Court for the District of Northern New York | 1898
Although this record has been expanded beyond reason and precedent, it will be noted that the real issue is one of the simplest that can arise in a patent cause, viz.: whether the patent is invalidated by a single prior patent. The best evidence of what the patent covers is the patent itself. It states that it is for “a new and useful improvement in regulating the generative capacity of dynamo-electric machines.” The claims are for the dynamo in combination with translating devices in multiple-arc; but as this arrangement of translators has been well known since 1875, invention cannot be predicated of this element of the combination; indeed, there is no pretense that it can be. If invention can be found at all, it must, therefore, be in the dynamo.
The object of the patentee was to produce means, assuming the translators to be lamps, by which the turning on and off of the lamps shall cause immediately a proper regulation of the current energizing the field-magnet of the dynamo without the help of any other mechanism. In short, the dynamo was expected automatically to adjust its generative capacity. The translating devices shown in the drawings are lamps, but the claims are not limited to lamps, and there is no canon of interpretation familiar to the court which will justify a construction so narrow. The claims, do not speak of lamps. The words are “translating devices,” and there can be no doubt that any translating devices arranged in multiple-arc are within the claims, which unquestionably cover motors, plating baths, heaters and other similar devices. The drawing shows a rudimentary dynamo of the conventional Edison type. It is the same dynamo which appears, mutatis mutandis, in a large number of patents which emanated about the same time from the patent office. The dynamo of the drawing has compound windings, a vertical field-magnet with pole pieces at the bottom and a field wound with two coils — a shunt coil of high resistance and a low resistance coil in series with a lamp circuit. The shunt circuit may, if desired, be supplied from an external source. The main conductor is brought up on one side and) wound around the magnet afterwards extending out parallel with the outer conductor of the exterior circuit.
The specification states that when translating devices are first put in circuit the magnet is sufficiently energized by the interior circuit, but as the number of translators is increased the resistance of the exterior circuit is lowered, and as they are thrown out the resistance of the main circuit increases and the energy of the magnet is lessened by the' decrease of current in the main conductor. This is practically all there is of the specification. Considering the far-reaching ali-absorbing claim which is now asserted for this patent, it must be admitted that the specification is most meager and unsatisfactory. It is almost a skeleton. If it were expressed in the full, clear and concise terms required by law, it' is fair to presume that the expert witnesses, at least those on the same side of the controversy, would agree as to its scope and meaning. It will be observed that it says nothing about “constant potential,” or, except inferentially, the' means of securing constant potential. All details as to the size of the field-magnets, the relative size of the coarse and fine wire and the length and
The combination of the first claim contains the following elements: (1) A dynamo. (2) Translating devices arranged in multiple-arc. (3) A field-circuit of constant resistance for primarily energizing the field-magnet. (4) Another field-circuit whose resistance is varied by the addition and removal of translating devices. The elements of ¡he other claims are substantially similar, and in view of the conclusion reached it is unnecessary to consider them in detail. Claim 3 differs from the other two in that the shunt circuit must be supplied from (he main conductors. It will be seen that the first claim is not for a dynamo of the Edison type or for the system of electric lighting adopted by him, but, on the contrary, that it is broad enough to cover, and does cover, any dynamo having the described characteristics in combination with any translators in multiple-arc.
The Brush patent relied upon by the defendants was applied for 17 months before, and was granted 3 month before, the earliest date fixed for the alleged Edison invention. The Brush patent is for an improvement in dynamo-electric machines, and has for its object the maintenance in such machines of a magnetic field while the machine is running whether the external circuit is closed or opgri. Without analyzing the patent in detail, suffice it to say that the description is specific, carefully drawn and clearly illustrated by six diagrams. The dynamo of the patent is a compound wound dynamo having a shunt and series coil, the former of high resistance and the latter of low resistance. In some of the figures the series coil is wound over the shunt coil; in others the shunt is wound over the series, and in another figure the two coils are wound on opposite ends of the same core. The dynamo is designed to gen (irate and maintain a sufficiently constant electro-motive force and produce an amount of current always corresponding to the amount needed by the devices in the working circuit. Mr. Brush shows his machine in combination with electroplating in multiple-arc, and Mr. Edison shows his in combination with electric lighting in multiple-arc. This is the principal distinction between the two. If the one multiple-arc circuit be the equivalent of the other, then it cannot be denied that every element of the patent in suit is found singly and in analogous congeries in the Brush patent, and that they are described there so as to be more readily understood, at least to the uneducated lay mind, than in the Edison patent. Not only is this clear from the Brush patent, but the proof shows that a number of machines were built pursuant to its directions and were commercially used more than two years prior to the date of the application for the Edison patent. These machines exist at the present day, and what is quite remarkable, and almost unique in patent litigation, is the fact that, in an art which has progressed with giant strides, machines made nearly 20 years ago are not only operative, but practically as successful as when first built. Two of these working dynamos have been introduced in evidence, one by the complainant and one by the defendants. Each is capable of doing the same work now as in 1880. All of the Brush
“In the art of electroplating, as practiced long before 1880, we find an arrangement of circuits substantially tbe same as that of the patent in suit. Here a large number of articles to be plated simultaneously are suspended in the bath by separate wires attached to a metallic rod placed across the top of the tank; that is to say the articles are arranged in multiple-arc with respect to the electric current.” Westinghouse v. Electric Light Co., 11 C. C. A. 342, 63 Fed. 588, 594.
It must be conceded, therefore, that if the claims of the patent in hand are to be construed according to the plain letter of their meaning, without importing therein limitations and refinements not found in, the patent, but suggested by subsequent and more accurate knowledge, the patent is invalidated by the Brush patent and the machines made in accordance therewith.
But it is argued that the patent is for a peculiarly regulated compound wound dynamo which secures constant, or nearly constant, potential in combination with incandescent lights arranged in multiple-arc or other- analogous devices requiring the same constant potential. In brief, that it is for the Edison dynamo in combination with the Edison system of electric .distribution. It is maintained that the Edison patent discloses all this and the Brush patent does not disclose it. Even though this position could be maintained it is still a question' whether it involved invention to secure more accurate regulation after the Brush patent had told the electrician how to secure regulation sufficiently perfect to be successful in the electroplating art. It would then seem to be a mere matter of winding within the knowledge of the skilled electrical engineer. But a sufficient answer is that the courts are not permitted to construe a patent by reconstructing it to conform to what the court may think was in the mind of the patentee at the-time.
Assuming that the dynamo shown in the Edison patent could be used for electroplating, and was so used in place of the Brush dynamo, it would not have conveyed to the art any information for producing constant potential which was not conveyed by the Brush dynamo. Translating devices which require constant potential should be harnessed to a dynamo which produces constant potential, but it does not follow, because they are shown thus diagrammatically connected, that the dynamo so described will secure constant potential or tell others how to secure it. The Edison patent, as before stated, says nothing regarding constant potential and gives no information as to the means of securing it which is not found equally well stated in
It is doubtful if Mr. Edison had in mind at the time he applied for the patent all of the improvements, perfections and refinements which are now asserted. In 1879 the art of electric lighting was in its infancy. With the modesty which is usually found in men of genius Mr. Edison frankly admits his lack of knowledge upon the subject now under discussion. lie says: “As I knew nothing about dynamo machines, I tried to get information from electricians and books.” His memory is also vague as to the success of the compound wound dynamos. He recollects that there was a great deal of trouble with the machines, and that none of them worked, but he attributes their failure to variations in the speed of the engine that operated them. Mr. Brush, on the other hand, thoroughly understood compound winding in connection with other devices in the art of electric lighting, and had proceeded far in the successful construction of dynamos. Were it important to inquire which of these two men would be most likely to produce a working machine having the necessary characteristics, there can be little doubt that Mr. Brush would be chosen. But such an inquiry seems irrelevant. The patent law cannot be administered along such lines as these. Patents are formal grants controlled by carefully drawn statutes and strict rules, and must be construed as other similar documents are construed. The court is not permitted to inquire what the patentee might have done or was capable of doing. The question is. what did-he do? Conjecture and speculation are out of place in interpreting the claims of a patent. But even if the claims be limited to incandescent lamps in multiple-arc circuit it would seem that they are met by the Brush dynamos. Several tests of these dynamos in connection with lamps were made, one of them being made at the argument. The court makes no pretention to anything but a most superficial knowledge of this complex subject which can hardly be mastered after the engrossing study of years, but it seemed to the court that the test demonstrated what the defendants sought to prove. The machine regulated automatically and maintained a constant electro motive force within permissible limits of variation. There was no noticeable variation in the lamps from no load to full load. The other experiments described in the record appear to have been similar in character and to have had similar results. The court cannot resist the conclusion that the claims, construed as they must he construed, are invalidated by the Brush patent and the dynamos built thereunder. A Brush plating machine if made now for the first time would infringe these claims; being, in fact, made before, it anticipates them.
But the learned counsel for the complainant insist:
“That even assuming the Brush plating dynamo to be a compound-wound dynamo within the scope of the Edison patent, there was, under all the circumstances shown by the record in this case, invention involved in the employment of such a dynamo in combination with a multiple-arc system of*276 electrical distribution, on account of the discovery that sucb a dynamo, when the shunt and series coils were properly proportioned, would secure automatically the peculiar regulation to compensate for variations in the load which is required by such a system.”
The doctrine of Potts & Co. v. Creager, 155 U. S. 597, 15 Sup. Ct. 194, is invoked in aid of this contention. As has frequently been pointed out, this case has created no new rule upon the question of double use. The case was peculiar upon the facts, which presented un entirely different condition of affairs from that developed in the case in hand. It has always been the law that invention must be denied to one who merely takes a device which has been used in the same or in an analogous art, and uses it in new environments to accomplish a similar result. Stearns & Co. v. Russell, 29 C. C. A. 121, 85 Fed. 218, and cases cited. It requires only the skill of the mechanic in the particular art to make the transfer from one branch thereof to another branch. An engineer who has used his engine to operate a series of looms knows enough to connect his driving wheel with a series of knitting machines, and a competent electrician who has used a dynamo successfully with one series of translating devices should be able to use it ih connection with another series of translating devices. In other words, the character of the translating devices does not change the character of the dynamo, and an electrician does not become an inventor because he attaches a series of lamps to a dynamo which had been used in connection with a series of heaters.
The complainant’s proposition, if sustained, would lead to the conclusion that Mr. Brush, after having obtained his patent in which the dynamo is described as suitable for an electroplating circuit, could have attached the same dynamo to a well-known lamp circuit and have obtained another patent for that, and so on, as often as he changed the character of the translators. Even though this work required enlargement, adjustment and some change in the winding, it would still be a question of degree within the realm of the skilled mechanic. An electrician would know how to adjust the machine to do the required work and adapt it to the new environment. An illustration is found in the record. Mr. Edison says that the first dynamo made by him did not work because of variation in the speed of the engine occasioned by poor governing “as a compound-wound machine should have a regular speed to utilize the invention; but after a while the demand for close regulation was met, and engine builders were enabled to build engines that were very reliable, and then the conditions for the employment of compound machines were met.” It will hardly be pretended that the engine builder who produced better regulation as the demands of the market required it was entitled to a patent. It would seem also that a skilled electrician would know how to adjust the Brush compound wound dynamo to the new conditions of an incandescent lamp circuit the moment the two were brought together. It would be like operating a carriage with a motor which had previously propelled a boat, or using a bullet mold for making pills. To restrict the Brush patent to electro
NOTE.
Motions have been made by both parties to strike out testimony. Most oí these are based on technical grounds and relate to testimony having little bearing upon the main point in issue. It will not do to strike out the entire testimony covered by these motions, as some of it is relevant and is objected to only on the ground that it was not taken at the proper time. Portions of the testimony criticised contain some pertinent matter and tlxe court does n'ot feel called upon to attempt to separate the wheat from the chaff. As I have frequently had occasion to observe, these motions are inconsequential, they lead to no result and are useful only as they affect the question of costs. Should I enter upon a critical examination of the testimony included Id these motions and strike out such portions as are irrelevant, no useful purpose will be subserved. The truth is that bo1h parties arc equally at fault for the abnormal size of the record. The difficulty is, of course, largely with the system, but it certainly seems as if counsel could prevent a great part of the tautology, discursiveness, repetition and tedious and aimless dissertations with which these records abound.
This case presents the most flagrant instance of elephantiasis in patent litigation which has come under my observation. To impose such a record upon a court overwhelmed with work is hardly defensible; instead of aiding the cause of truth it obstructs and delays it. Not -only is it unnecessary, but, as the counsel who last addressed the court for the defendants expressed it, it is unjustifiable from a “humanitarian” point of view as well. The courts of this circuit have animadverted so frequently and so severely of late upon this practice that it is doubtful if it can bo prevented by anything the court can say. The only protection the court has against such records is to deny costs for the irrelevant portions. I have no doubt that at least half