Lead Opinion
Opinion for the court filed by Circuit Judge RADER. Circuit Judge LOURIE dissents in part.
In this patent case, a jury found that Goodyear Tire & Rubber Company (Goodyear) and Shell Oil Company (Shell) infringed U.S. Patent No. 4,064,112 (112 patent). The United States District Court for the Eastern District of Tennessee sustained the verdict that defendants’ continuous solid state (CSS) production lines 1 and 2 infringed the 112 patent. The district court, however, granted defendants’ motion for judgment as a matter of law (JMOL) that CSS lines 3-8, 10 and 11 did not infringe the 112 patent.
This appeal tests the correctness of the district court’s claim interpretation. Upon review of the entire record, this court holds that the district court properly denied JMOL on the jury’s finding of infringement by CSS lines 1 and 2. Additionally, the district court correctly dismissed the defendants’ antitrust counterclaims, correctly declined to apply the defense of laches, and correctly granted JMOL of noninfringement by CSS lines 3-8, 10 and 11. Finding that plaintiffs waived their right to object to proper venue, this court reverses the dismissal of Goodyear’s state law counterclaims. Accordingly, this court affirms-in-part, reverses-in-part, and remands for consideration of Goodyear’s state law counterclaims.
I.
The T12 patent issued to Hans Joachim Rothe, et al., (Rothe) on December 20, 1977. Rothe assigned the patent to his employer, Zimmer Aktíengesellsehaft (Zimmer). The ’112 patent claims a process for making granules of container-grade polyethylene terephthalate (PET). Container-grade PET granules are the central ingredient for a variety of products, including two-liter soft drink bottles.
Rothe’s invention solved a significant problem in producing PET granulate. To make a granulate suitable for unbreakable bottles requires an increase in the molecular weight and intrinsic viscosity of PET. This increase occurs through the process of polycondensation or solid state polymerization. Polycondensation takes place in a “fixed bed” reactor. In the reactor, the PET granulate flows slowly downward while hot, inert gases pass through the PET to remove aldehyde byproducts. During polycondensation, the PET granulate can stick together and plug the large reactor vessel.
Rothe’s invention solved this sticking problem without the addition of anti-sticking agents or expensive modifications to the reactor. Rothe learned that a crystallization step before polycondensation would prevent sticking. To prevent sticking, however, the crystallization must occur at temperatures at or above the polyeondensation temperatures. Claim 1, the broadest claim of. the ’112 patent, from which all other claims depend, expresses the invention:
1. A process for the continuous production of high molecular weight polyethylene terephthalate by polyeondensation in the solid phase from a dried, granulated polyethylene terphthalate, having an intrinsic viscosity of at least 0.15, which comprises crystallizing the granulate to a density of at least 1.390 g/cm under forced motion at a temperature of 220 0 C to 260 0 C under an inert gas atmosphere, passing the crystallized granulate at a constant or reduced temperature to a continuous fixed bed reactor, and, continuously polycondensing the crystallized granulate in said reactor while in contact with an inert gas stream at a temperature equivalent to, or lower than, the crystallization temperature.
’112 patent. (Emphasis supplied.)
Eastman Kodak Company
Soon after Eastman filed suit, Goodyear filed its own action in the United States District Court for the District of Columbia. Goodyear charged that Eastman’s acquisition and enforcement of the ’112 patent violated federal antitrust and state unfair competition laws. On Eastman’s motion, the district court transferred this suit to the Eastern District of Tennessee, where it was consolidated with Eastman’s suit. At this point, Goodyear sought reexamination of the ’112 patent. In February 1993, the Patent and Trademark Office (PTO) confirmed the patentability of all claims of the ’112 patent.After discovery stretching into 1994, the district court dismissed Goodyear’s federal antitrust claims with prejudice and struck the related patent misuse defenses.
Thus, after lengthy proceedings, the district court began trial. At trial, the parties principally contested the meaning of the claim phrase “at a temperature of 2200 C to 260 0 C.” Eastman read this language as one of several process parameters, suggesting the heating medium must comply with these limits. Goodyear, on the other hand, insisted that this claim limitation referred to the granulate or polymer itself, not the temperature of the heating medium.
During trial, this court issued its in banc decision in Markman v. Westview Instr., Inc., 52 F.3d 967, 34 USPQ2d 1321 (Fed.Cir.1995) (in banc), aff'd, — U.S. -,
II.
Claim Construction
As noted earlier, the central issue in this appeal — as is often the case in patent appeals in the wake of Markman, 52 F.3d at 989 (Mayer, J., coneurring)(“[T]o decide what the claims mean is nearly always to decide the case.”) — is the district court’s claim interpretation. Claim interpretation proceeds under the guidelines set forth by the Markman case. Markman, — U.S. -,
‘To ascertain the meaning of claims, we consider three sources: The claims, the specification, and the prosecution history.’
... ‘Expert testimony, including evidence of how those skilled in the art would interpret the claims, may also be used.
Markman, 52 F.3d at 979 (citations omitted). The claim language itself defines the scope of the claim. See York Prods., Inc. v. Central Tractor Farm & Family Center,
The claim calls for “crystallizing the granulate to a density of at least 1.390 g/cm3 under forced motion at a temperature of 220 0 C to 2600 C under an inert gas atmosphere.” ’112 patent, col. 10, 11. 28-31 (emphasis added). In this context, according to Webster’s II New Riverside University Dictionary, the word “to” means “with the resultant condition of’ or “toward a specified state,” the word “at” means “in the state or condition of,” and the word “under” means “undergoing or receiving the effects of.” Webster’s II New Riverside University Dictionary, 1214, 134, 1256 (1988). Under normal rules of syntax, therefore, “at” and “under” implies a controlled value (such as a process parameter), whereas “to” implies a measured and intended goal or condition (such as a polymer temperature). This context suggests that a step performed “at” a temperature indicates a process condition, not the condition of the matter under process.
Removing the intervening phrases leaves the language “crystallizing the granulate at a temperature of 220 ° C to 260 0 C.” The “at” in the temperature clause thus modifies “crystallizing,” a process, not “the granulate.” Indeed the claim thrice refers to temperatures as process steps with the introductory preposition “at”: (1) “crystallizing ... at a temperature of 220 0 C to 260 0 C”; (2) “passing ... at a constant or reduced temperature”; and (3) “polycondensing ... at a temperature equivalent to, or lower than, the crystallization temperature.” ’112 patent, col. 10, 11. 28-36 (emphasis added). This sentence structure discloses that the preposition “at” preceding the temperature limitation refers to the process temperature of the heating medium, rather than the temperature of the polymer itself.
In addition, the final phrase in the claim discusses “a [polycondensation] temperature equivalent to, or lower than, the crystallization temperature.” This reference to “the crystallization temperature” identifies the earlier temperature limitation with the crystallization process step, rather than the temperature of the granulate. The claim does not say “equivalent to, or lower than, the temperature of the granulate during crystallization,” but instead says “equivalent to, or lower than, the crystallization tempera-time.” As a process parameter, the 220 0 C to 260 ° C language specifies the temperature of the heating medium which performs the process, rather than the temperature reached by the polymer itself during crystallization.
More importantly, however, a central requirement of the claim is a particular relationship between crystallization temperature and polycondensation temperature, which is stated by the final phrase in the claim. Because the second step — “continuously poly-condensing the crystallized granulate in said reactor while in contact with an inert gas stream at a temperature equivalent to, or lower . than, the crystallization temperature” — expressly refers to a heating medium temperature, a proper comparison refers to the heating medium temperature in the first step as well. To ensure the proper relationship, the claim logically compares process conditions during crystallization to process conditions during polycondensation. Otherwise, the claim would compare granulate temperature during one phase of the process with heating medium temperature during another phase. Thus, the syntax of the claim suggests comparison of like entities to like entities — apples to apples, oranges to oranges, heating medium to heating medium.
The claim language alone, however, does not settle the claim interpretation issue. One of the parameters in the process sequence, namely “to a density of at least 1.390
The specification, of which the claims are part, teaches about the problems solved by the claimed invention, the way the claimed invention solves those problems, and the pri- or art that relates to the invention. These teachings provide valuable context for the meaning of the claim language. The specification states: “Polyethylene terephthalate ... was crystallized, using the apparatus described in the examples 1-18, at a temperature, Tk, of 235° [C] for a time, tk, of 1.5 hours.” 112 patent, col. 4, 11. 56-59. The specification uses the abbreviation Tk, or crystallization temperature, with apparent reference to the temperature of the heating medium. 112 patent, col. 6, 11. 66-68 (“The crystallization temperature Tk was always selected to conform to the polyeondensation temperature Tf.”) (emphasis added).
Table 1 in the specification, however, is even more revelatory of the meaning of Tk, or the crystallization temperature. In showing the temperature values for various parameters and the corresponding presence or absence of “stickiness,” Table 1 lists the crystallization temperature values for a sequence of samples in whole numbers, falling in increments of five or ten degrees. By recording temperatures in exact increments of 5 to 10 degrees, the table suggests that the crystallization temperature refers to the setting of the heating medium, rather than a precisely measured polymer temperature. The table apparently reports the dialed-in temperature settings of the heating apparatus, which would likely be selected in increments rounded to the nearest five degrees, rather than the temperature of the polymer which likely would be measured and recorded with greater precision. Values for the polycondensation temperature, which is unquestionably a process parameter, also appear in exact increments of five to ten degrees. Thus, Table 1 points to Tk as the temperature of the heating medium, not the granulate.
Again, however, the specification — though helpful — does not supply entirely conclusive proof of claim meaning. For instance, the spécification also indicates: “that [t]he granulate was heated in the continuously operating mixer to the temperature values, Tk.” ’112 patent, col. 3, 11. 45-46 (emphasis added). This passage suggests that the granulate achieves the crystallization temper-' atures. Moreover the specification refers in another passage to the temperature of the heating medium separate from the crystallization temperature, ’112 patent, col. 7,11. 52-53, suggesting that the patent drafter knew how to refer to the temperature of the heating medium when he so intended. Thus, although the specification tends to support the trial court’s claim reading, this court has cause to look further at other sources for the meaning of the claim language.
The administrative record of patent acquisition also supplies further context for the meaning of the claim language. During prosecution, Zimmer, the original assignee of the ’112 patent, emphasized the invention’s surprising results. In response to an office action, Zimmer noted that sticking “may be prevented] if the polyeondensation is preceded by a crystallization reaction utilizing temperature[s] which are higher than or equal to the temperature at which the solid state fixed bed polyeondensation reaction is performed.” In this passage, the term “utilizing” suggests the claims refer to the temperature of the heating medium rather than the temperature of the polymer. Zimmer used similar language throughout the prosecution history, with words like “used,” “utilized,” and “while heating at” the claimed temperature range. Further, Rothe submitted a drawing to the Patent and Trademark Office (PTO) that clearly shows a “hot oil jacket” at a temperature of 220 ° C to 260 ° C surrounding the crystallization chamber. Thus, the prosecution history supports the
Again, however, the evidence from the prosecution history is not conclusive. In other parts of the administrative record, Zimmer distinguished the temperatures claimed in the patent from polymer temperatures in the prior art. Among other distinctions from the prior art, Zimmer argued that the polymer temperature in its invention decreases or stays the same upon entry into the poly-condensation stage. In making this distinction, Zimmer apparently refers to polymer temperatures. In the prior art, a preheater preceded the polycondensation step. In the prior art Jaeger process, the preheater heating medium temperature is higher than at polycondensation, U.S. Pat. No. 3,756,990, col. 10,11, 69-75, and in the prior art British Hoechst patents, the preheater heating medium temperature is approximately the same as at polycondensation, British Pat. No. 1,215,093. Thus Zimmer’s temperature distinctions from prior art rely on polymer temperature, rather than heating medium temperatures. At no point, however, does the prosecution history show that Zimmer intended that the crystallization temperatures in its claim refer only to polymer temperatures.
Accordingly, the district court properly consulted extrinsic evidence relevant to claim meaning. As a general rule, the construing court interprets words in a claim as one of skill in the art at the time of invention would understand them. See Intellicall, Inc. v. Phonometrics, Inc.,
As often occurs, each party presented experts vouching for their usage of the crystallization temperature limitation in the claim. According to the district court, Dr. Paul Phillips best reconciled these competing experts, and we agree. Dr. Phillips noted that the ordinary meaning of crystallization temperature in the field of polymer science is generally the temperature of the polymer undergoing crystallization, but the meaning of the term in the more specialized field of industrial chemical production is the temperature of the heating medium. Thus, in scientific writings focused on properties of a particular chemical, crystallization temperature often refers to the temperature of that chemical. Even Dr. Phillips used crystallization temperature to refer to the temperature of the polymer in such scientific writings. In technical writings about chemical processes and production methods, however, crystallization temperature generally refers to the temperature of the heating medium.
After a careful consideration of the entirety of the relevant evidence, the district court concluded and instructed the jury: “In this [first] step [of the claimed process], “220 0 C to 260 ° C” is the temperature of the heating medium and not the temperature of the granulate or polymer.” Upon review of the entire record, and recognizing both the trial court’s “trained ability to evaluate [expert]
Indeed, the district court’s claim interpretation is supported by a review of the 1993 reexamination, one of four reexaminations (three of which Goodyear requested in connection with this litigation) of the ’112 patent at the PTO. The claims require that the PET granulate polycondenses at a temperature “equivalent to, or lower than, the crystallization temperature.” ’112 patent, col. 10, 11. 35-36. During the 1993 reexamination, the examiner’s Reexamination Interview Summary Form stated that this claim language meant “not exceeding the initial crystallization temperature during further crystallization and after condensation.” To the extent that the examiner’s certificate purports to ascribe meaning not found in the claim language, this court must not permit prosecution history evidence to “enlarge, diminish, or vary” the meaning of claim language. Markman,
In sum, the limitation in the examiner’s statement does not appear anywhere in the claim language. The “initial” and “further” crystallization was apparently the examiner’s way of distinguishing Jaeger which precrystallized some granulate before it entered the reactor for so-called “further crystallization” and polyeondensation. Jaeger, however, does not disclose the temperature of its precrystallization, nor the critical ’112 patent feature of holding the subsequent temperatures below that first crystallization step. Thus, without creating any additional limitations, as the examiner conceded by granting the reexamination certificate without any changes in claim language, the claims sufficiently distinguished Jaeger. Moreover, the examiner’s statement might well render the claim inoperable. This court seeks to interpret claims to preserve, rather than defeat, their validity. ACS Hosp. Sys., Inc. v. Montefiore Hosp.,
Judgment as a Matter of Law
Having sustained the trial court’s claim interpretation, this court next examines whether any jury could reasonably have found that Goodyear’s accused CSS lines 1 and 2 literally infringe the ’112 patent, as properly construed. See Exxon Chem. Patents, Inc. v. Lubrizol Corp.,
Antitrust Claims
Goodyear alleged that Eastman attempted to monopolize the container-grade PET market in violation of Section 2 of the Sherman Act, 15 U.S.C. § 2 (1994), and violated Section 7 of the Clayton Act, id. § 18, by acquiring the exclusive right to enforce the ’112 patent. The district court judge granted summary judgment in favor of Eastman on both of these counterclaims.
In determining whether the district court correctly granted summary judgment, this court applies the law of the regional circuit for this district court. See Cygnus Therapeutics Sys. v. ALZA Corp.,
Section 2 of the Sherman Act states: Every person who shall monopolize, or attempt to monopolize, or combine or conspire with any other person or persons, to monopolize any part of the trade or commerce among the several States, or with foreign nations, shall be deemed guilty of a felony.
15 U.S.C. § 2. In contrast, section 7 of the Clayton Act deals with “monopolistic tendencies in their incipiency and well before they have attained such effects as would justify a Sherman Act proceeding.” See Cargill, Inc. v. Monfort of Colo., Inc.,
The Department of Justice, the Federal Trade Commission, state attorneys general, and private parties may enforce these regulations. Private parties may bring suit for violation of the Sherman Act and the Clayton Act under sections 4 (treble damages) and 16 (injunctive relief) of the Clayton Act. 15 U.S.C. §§ 15, 26 (1994). A private party, however, must meet certain standards to qualify for standing to sue under these provisions. One such requirement is that a private party must allege an “antitrust injury.” See Atlantic Richfield Co. v. USA Petroleum Co.,
To satisfy the requirement of an antitrust injury, the party must allege and prove “injury of the type the antitrust laws were intended to prevent and that flows from that which makes defendants’ acts unlawful.” Brunswick,
In this ease, Goodyear alleges that Eastman acquired the rights to the T12 patent, despite its dominance in the PET market. Goodyear claims competitors in the PET market would experience anticompetitive effects from this acquisition, because Eastman’s enforcement of the T12 patent— which was twelve years old and had never been enforced by Zimmer — would force competitors to either defend an infringement suit, seek a sublicense, or stop production and dismantle production facilities. Specifically, Goodyear alleges that it incurred expenses in defending this suit, that it spent additional funds negotiating an indemnification clause as part of the sale of its PET business, and, finally, that this suit caused Shell to pay less for Goodyear’s PET production facilities. Goodyear did not allege any injury caused by an actual lessening of com
A sufficient antitrust injury must entail an “injury” within the meaning of sections 4 and 16, and this injury must be caused “by reason of anything forbidden in the antitrust laws.” Brunswick,
Similarly in this case, Goodyear has not alleged injuries caused “by reason of anything forbidden in the antitrust laws.” Goodyear alleges injuries stemming from Eastman’s enforcement of the ’112 patent. Goodyear, however, would have suffered these same injuries regardless of who had acquired and enforced the patent against it. Indeed, Goodyear would have suffered these same injuries if Zimmer had retained exclusive rights to the patent and had enforced the patent against Goodyear itself. The cause of Goodyear’s injuries was not that Eastman enforced the ’112 patent, but that the patent was enforced at all. These injuries, therefore, did not occur “by reason of’ that which made the acquisition allegedly anticompetitive. See Brunswick,
As Goodyear — a private party — did not allege a sufficient antitrust injury, it lacks standing under sections 4 and 16 of the Clayton Act. Thus, this court affirms the district court’s grant of summary judgment on the antitrust claims. We also affirm the district court’s denial of Goodyear’s misuse defense. Acquisition of and enforcement of a patent do not in and of themselves constitute patent misuse.
State Law Counterclaims
The trial judge at first declined to exercise pendent jurisdiction of Goodyear’s counterclaim under Ohio law for tortious interference with business. In response to Goodyear’s motion to reconsider, the district court dismissed Goodyear’s permissive state law counterclaim for a failure to establish venue.
28 U.S.C. § 1406(b) (1994) states:
(b) Nothing in this chapter shall impair the jurisdiction of a district court of any matter involving a party who does not interpose timely and sufficient objection to the venue.
Goodyear’s First Amended Answer and Counterclaims alleged proper venue for the state law counterclaim. Eastman’s reply admitted that venue was proper: “[PJlaintiffs admit that complete diversity of citizenship exists between plaintiffs and Goodyear and that venue is proper pursuant to the cited sections.” Because Eastman waived its right to object to venue, the trial court erred in dismissing Goodyear’s state law counterclaim for failure of venue.
Laches
This court reviews a district court’s laches determination for an abuse of discretion. See A.C. Aukerman Co. v. R.L. Chaides Constr. Co.,
Without the benefit of the presumption, Goodyear has the burden to prove two elements of laches. First, Goodyear must prove that Eastman delayed filing suit an unreasonable and inéxcusable length of time. See Aukerman,
First, the delay begins when the plaintiff knew, or in the exercise of reasonable diligence should have known, of the defendant’s allegedly infringing activity. See Adelberg Lab., Inc. v. Miles, Inc.,
Moreover, the trial court did not, as Goodyear argues, focus solely on the defendants’ acts to the exclusion of the plaintiffs’ conduct. Rather the trial judge properly examined the defendants’ action in maintaining secrecy and denying the alleged infringement as evidence of Zimmer’s lack of constructive knowledge. See, e.g., Fromson v. Western Litho Plate & Supply Co.,
JMOL of Non-infringement of CSS Lines 3-8, 10 and 11.
Before giving the case to the jury, the trial judge entered judgment as a matter of law of noninfringement with respect to Goodyear’s CSS lines 3-8, 10, and 11. The trial judge based this decision primarily on the claim limitation that the crystallization takes place under an “inert gas atmosphere.” The trial judge determined that these lines do not infringe because the “inert gas” limitation does not include the heated air in the accused processes.
A grant of judgment as a matter of law under Fed.R.Civ.P. 50(a) is subject to de novo review. See Burroughs Wellcome Co. v. Barr Lab., Inc.,
In making this determination, this court must first properly construe the claim language at issue. In this case, the claim interpretation question is whether the term “inert gas atmosphere” includes heated air. The district court determined that it does not. This court agrees.
The specification is particularly enlightening in reaching this conclusion. Initially, the “Summary of Invention” section of the ’112 patent states:
According to the present invention, prior to the start of the solid state polycondensation reaction, the granulate is crystallized ... in an inert gas atmosphere. The crystallized granulate is then transferred, at the same temperature or at a lower temperature, while avoiding the addition of air, to a continuously operating, fixed bed reactor____
’112 patent, col. 2,11. 28-36 (emphasis added). This transfer is later described as taking place under “an airtight seal.” ’112 patent, col. 3, 1. 51. This language suggests as well that the earlier crystallization phase should take place without air. Thus, the specification shows that air cannot make up the required “inert gas atmosphere.”
Additionally, the specification states that “[e]levated oxygen and aldehyde levels are undesirable since they may cause discoloration of the end product,” and that an oxygen content of less than 10 milligrams per kilogram (parts per million) and water levels of less than 250 milligrams per kilogram (parts per million) are preferable. ’112 patent, col. 3, 11. 16-28. Indeed, in Examples 41-44, “it is evident that with [oxygen] concentrations of greater than 10 [parts per million] in the inert gas, severe discoloration of color in the granulate occurs.” T12 patent, col. 6, 11. 53-56. By contrast, undisputed testimony revealed that the heated air used in Goodyear’s lines contains 170,000 parts per million oxygen and 40,000 parts per million water. Thus, because the specification requires that the “inert gas atmosphere” have limited amounts of water and oxygen, the specification supports the trial judge’s claim interpretation that heated air — which contains large amounts of both oxygen and water — does not meet that limitation.
Turning next to the extrinsic evidence, numerous experts testified that PET is reactive with air under the conditions of crystallization, and one expert, who had not met with attorneys from either side and knew nothing about the issues in this case prior to taking the stand, testified that air is not an “inert gas” in this context. In light of the clear meaning of the specification, which finds adequate support from the extrinsic evidence, this court sustains the district court’s claim interpretation.
Finally, we turn to the district court’s application of this claim interpretation to the issue of infringement. Under this interpretation — that “inert gas” does not include Goodyear’s heated air — the district court was correct in determining that CSS lines 3-8, 10 and 11 do not meet the “inert gas” limitation because they use only heated air. However, an accused device outside the literal meaning of the claims may still infringe by equivalents so long as each claimed element or its substantial equivalent is found in the accused device. See Warner-Jenkinson Co. v. Hilton Davis Chem. Co., — U.S. -,-,
Willful Infringement
Eastman contends that the trial court erred in issuing discovery and evidentiary rulings regarding two documents and in denying a proposed jury instruction allowing the jury to draw an adverse inference from Goodyear’s refusal to produce documents. Thus, Eastman seeks a new trial on willful infringement.
This court reviews discovery and evidentiary rulings under an abuse of discretion standard. See Kearns v. Chrysler Corp.,
A jury instruction ruling is subject to review for prejudicial legal error. See Jamesbury Corp. v. Litton Indus. Prods.,
This court has stated that failure to introduce an exculpatory opinion of counsel at trial may support an inference that such an opinion was either never obtained or was adverse. See Fromson,
III.
In sum, this court holds that the district court properly denied JMOL on the jury’s finding of infringement by CSS lines 1 and 2. Additionally, the district court correctly dismissed the, appellants antitrust counterclaims, correctly declined to apply the defense of laches, and correctly granted JMOL for noninfringement by CSS lines 3-8,10 and 11. Finally, finding that appellants waived their right to object to proper venue, this court reverses the dismissal of Goodyear’s state law counterclaims.
Costs
Each party shall bear its own costs.
AFFIRMED-IN-PART, REVERSED-IN-PART, AND REMANDED.
Notes
. Eastman Chemical Company, which had previously been a division of Eastman Kodak Company, became a separate corporation in December 1993.
Dissenting Opinion
dissenting-in-part.
I respectfully dissent from the court’s decision to affirm the district court’s judgment with respect to infringement by lines 1 and 2.
I do not agree that the claim limitation “crystallizing the granulate ... at a temperature of 220° C to 260° C” refers to the temperature of the heating medium. The claim is clear on its face, when read in light of the specification, that it refers to' the temperature of the granulate. Thus, the court erred in its instruction to the jury concerning the meaning of the claim and in permitting the jury to rely on such extrinsic testimony as that given by Dr. Phillips.
When the granulate is crystallized “at a temperature,” the granulate is at that temperature. I do not believe the specification is unclear on this point. Nothing in the patent, the prosecution history, or even the trial testimony indicates otherwise. The majority opinion, with great care, provides much analysis on this issue, but it is incorrect. Each of
The summary of the invention indicates, 112 patent, column 2, lines 30-32, that the granulate is crystallized at temperatures of 220°C to 260°C. It then states that the crystallized granulate is then transferred at the same temperature to a reactor where it is polycondensed at a temperature equivalent to, or lower than, the crystallization temperature. It also states, at column 2, lines 56-58, that, according to a preferred embodiment, the crystallization is effected at a temperature of 230°C to 245°C. The specification also, at column 4, lines 33-35, makes a statement that the examples are “run at [particular] temperatures,” indicating that the materials being treated are “at” that temperature. It is clear from the specification, consistent with conventional chemical terminology, that the temperature of the granulate is what is meant in each ease.
The examples are similarly clear. At column 3, lines 46-47, the text of examples 1-18 states: “The granulate was heated in the continuously operating mixer to the temperature values, Tk, as indicated in Table 1____” When the granulate is heated to a temperature, it, not the heating medium, gets to that temperature. Examples 19-26, at column 5, line 14, refer to “temperature measurements.” One obviously “measures” the temperature of the reactant rather, than “setting” the temperature of a heating medium. Equally telling.is this use of a symbol for the temperature of the substance undergoing crystallization, Tk, which the record shows conventionally means the temperature of the substance being crystallized. (Eastman’s expert witnesses, Drs. Phillips and Gintis, as well as Goodyear’s expert witness, Dr. Harris, each indicated that he and other polymer chemists generally use this symbol and the synonymous phrase “crystallization temperature” to refer to the temperature of the material undergoing the reaction.) See Markman v. Westview Instruments, Inc.,
Nowhere in the description of the process in the specification is there reference to setting the temperature of a heating medium. The words “heating medium,” constantly referred to in the majority opinion as the referent of the phrase “at a temperature” in the claims, do not appear in the portion of the specification describing the claimed process. They only appear in the portion describing apparatus to measure granulate stickiness, see column 7, lines 52-53, which is not the invention and which it is a purpose of the invention to prevent, see column 2, lines 39-41. Even in this section, at column 8, lines, 31-32, the specification describes a temperature feeler which measures the granulate temperature to correlate it with granulate stickiness. This is distinctly different from the description of the process provided earlier in the specification, and the claims track the description of the process. I will not prolong this opinion by citing further places in the specification indicating that temperature references refer to the material being acted upon, not to the temperature of the heating medium.
The trial court and, regrettably, the majority of this panel, have simply been misled concerning what the specification clearly states and means. The analyses in the majority opinion leading to the contrary conclu
Given the clear meaning of “at a temperature,” I believe that there is no need to resort to extrinsic evidence to resolve an ambiguity in the claim. The majority opinion acknowledges that extrinsic evidence cannot be admitted to contradict the claims, the specification, and the prosecution history. See Markman v. Westview Instruments, Inc., — U.S. -, -,
However, even if extrinsic evidence such as Phillips’s testimony is considered, it is ambiguous at best. Notwithstanding his admission of the common meaning of the phrase “crystallization temperature,” Phillips stated that in the more specialized field of industrial chemical production someone of “ordinary skill in that art” would read that phrase as a “setting” for the heating medium. That contradicts the specification. One must read and rely on the specification, not invent categories of activity to which witnesses can assign different meanings for the same language. The patent teaches others of skill in the art how to make the claimed polymer, consistently using language meaningful to chemists; the claims track this language. It does not tell how to implement the fine points of industrial-scale techniques. It speaks to those who read the specification and carry out the claimed process, not to plant technicians.
Although proper interpretation of the claims as above is sufficient to result in a judgment for Goodyear, the majority opinion’s interpretation of the meaning of the claim phrase “continuously polycondensing ... at a temperature equivalent to, or lower than, the crystallization temperature” is also wrong. As the majority opinion states, quoting from the Supreme Court’s Markman opinion, — U.S. at-,
Given the proper claim construction, the trial court should have granted judgment as a matter of law that lines 1 and 2 do not infringe the ’112 patent.
July 2, 1997.
A combined petition for rehearing and suggestion for rehearing in banc having been filed by the Appellant, and the petition for rehearing having been referred to the panel that heard the appeal, and thereafter the suggestion for rehearing in banc having been referred to the circuit judges who are in regular active service, it is ORDERED
that the petition is GRANTED for the limited purpose of making additions to the opinion.
[Editor’s Note: Amendments incorporated for purpose of publication.]
It is further ORDERED that the suggestion for rehearing in banc is DECLINED.
The mandate of the court will issue on July 9,1997.
Not surprisingly, the prosecution history in reexamination also contains multiple references to the temperature of the granulate, including, e.g., the passages: "the PET granules 'provide as much as a 10°C increase in their temperature "the plastics material has been preheated to a temperature in the range and, "the granular material was preheated to 220°C____"