OPINION
This matter is before the court following remand to the Department of Commerce (“Commerce”) in Downhole Pipe & Equip. LP v. United States, 36 CIT -,
BACKGROUND
The relevant facts and procedural history of this case are set forth in Downhole I, 36 CIT at -,
The Final Determination specifically targeted drill pipe green tubes (“DPGT”), an input for drill pipe defined as “seamless tubes with an outer diameter of less than or equal to 6 5/8 inches[,] ... containing between 0.16 and 0.75 percent molybdenum, and containing between 0.75 and 1.45 percent chromium.” Id. at 1967. Commerce determined the surrogate value for DPGT using import data for Indian Harmonized Tariff Schedule (“IHTS”) categories 7304.23 and 7304.29. See Drill Pipe from the PRC: Issues and Decision Memorandum for the Final Determination at 31-32 (Jan. 3, 2011), A-570-965.
In Downhole I, the Court remanded the Final Determination to Commerce with instructions to reconsider the surrogate values for DPGT and the labor wage rate.
On remand, Commerce examined a number of potential surrogate values for DPGT, including: import data for IHTS 7304.23, 7304.29, and 7304.59; price data on P1110 and J/K 55 tubes from Metal Bulletin Research; and adjusted values for alloy steel billets and seamless tubes. See Draft Results of Redetermination Pursuant to Remand at 4 (Apr. 5, 2013), ECF No. 119-2 (“Draft Results ”). Commerce initially selected price data for imports under IHTS 7304.59.10 and 7304.59.20, “circular, seamless, alloy” classifications covering “products which are not properly classified as drill pipe, OCTG, or a number of other clearly-delineated types of tubes.”
For the final results, Commerce selected import data from IHTS 7304.59.20 alone to
Plaintiffs filed comments alleging that the Remand Results were unsupported by substantial evidence and otherwise not in accordance with law. See Pis.’ Cmts. at 7-23. Plaintiffs ask the court to remand again with guidance on an acceptable range of surrogate values for DPGT. See id. at 23-25.
JURISDICTION and STANDARD OF REVIEW
The court has jurisdiction pursuant to 28 U.S.C. § 1581(c) (2006) and section 516A(a)(2)(B)(i) of the Tariff Act of 1930,
The court will uphold Commerce’s remand redetermination unless it is “unsupported by substantial evidence on the record, or otherwise not in accordance with law?’ 19 U.S.C. § 1516a(b)(l)(B)(i). “ ‘Substantial evidence ... means such relevant evidence as a reasonable mind might accept as adequate to support a conclusion? ” Goldlink Indus. Co. v. United States,
DISCUSSION
Commerce determines the normal value of subject merchandise produced in a non-market economy (“NME”) “on the basis of the value of the factors of production utilized in producing the merchandise” in a comparable market economy. 19 U.S.C. § 1677b(c)(l). In selecting these surrogate values, Commerce must use the “best available information.” Id. Commerce “normally will use publicly available information” from a single country, 19 C.F.R. § 351.408(c)(1), (2) (2013), and it “prefers data that reflects a broad market average, is ... contemporaneous with the -period of review, specific to the input in, question, and exclusive of taxes on exports.” Fuwei Films (Shandong) Co. v. United States, 36 CIT -, -,
“[T]he process of constructing foreign market value for a producer in a [NME] country is difficult and necessarily imprecise.” Nation Ford Chem. Co. v. United States,
Plaintiffs argue that Commerce erroneously determined that IHTS 7304.59.20 was the best available information because IHTS 7304.59.20 is not representative of DPGT and Commerce did not provide adequate justification for rejecting non-IHTS alternative values on the record. See Pis.’ Cmts. at 8-23.
I. Commerce Reasonably Concluded that IHTS 7304.59.20 Best Represented DPGT
Plaintiffs argue that Commerce erred in finding that IHTS 7304.59.20 was representative of DPGT because: (1) Commerce’s analysis of Indian tariff classifications was inadequate; (2) Commerce failed to address Infodrive data indicating that IHTS 7304.59.20 was not representative of DPGT or DP-Master’s merchandise; (3) Commerce ignored evidence indicating that the average unit value (“AUV”) of entries under IHTS 7304.59.20 was “aberrantly high;” and (4) Commerce improperly relied on the NIS Memo. See Pis.’ Cmts. at 8-21.
A. Analysis of Indian Tariff Classifications
Plaintiffs argue that “Commerce’s legal analysis of tariff classifications was inadequate” because Commerce dismissed alternative IHTS subheadings without considering “legal principles” such as General Rule of Interpretation 2(a).
Plaintiffs fail to demonstrate that Commerce’s IHTS analysis was inadequate. First, Plaintiffs do not cite any legal authority demonstrating that Commerce must conduct a full classification analysis when considering import data from a particular foreign tariff heading as a surrogate value.
B. Infodrive Data
Plaintiffs also argue that Infodrive data demonstrates that 7304.59.20 is not representative of DPGT generally, or DP-Master’s DPGT. See Pis.’ Cmts. at 16-18. Plaintiffs cite Infodrive data indicating that there were no entries of DPGT in at least 60% of the entries under IHTS 7304.59.20 during the period, of investigation. See id. at 16. In light of this evidence and Infodrive data indicating that DPGT did not enter under IHTS 7304.59.10 at all, Plaintiffs conclude that Commerce erroneously selected IHTS 7304.59.20 data to value DPGT. See id. at 17-18.
Plaintiffs essentially compare Commerce’s selection of IHTS 7304.59.20 to the surrogate value for DPGT that the Court remanded in Downhole I. See id. at 17. In that opinion, the Court recognized Info-drive’s “utility ... as, a supplement to. aggregated IHTS data,” but also noted that “Commerce need not rely on Infodrive data that is incomplete or demonstrably inaccurate.” Downhole I, 36 CIT at -,
In contrast to the facts in Downhole I, here Commerce explained why its decision retained substantial record support in light of the Infodrive data. See Remand Results at 16-17. As noted above, Commerce selected IHTS 7304.59.20 based on its own analysis of the IHTS and the professional opinion of a CBP official. See Draft Results at 5-6, 15-16; Remand Results at 14-16. With specific regard to the Infodrive data, Commerce noted that IHTS 7304.59.20 was not limited to DPGT as it is “a basket category covering multiple types of seamless alloy tubes that could not be classified elsewhere.” Id. at 16-17. Additionally, given that the other IHTS subheadings did not capture DPGT, and “without information corroborating what the remainder of the overall imports consist[ed] of,” Commerce concluded that IHTS 7304.59.20 was still most representative of DPGT. See id. at 17. Because it addressed the Infodrive data in compliance with the requirements articulated in
Plaintiffs also argue that the Infodrive data established that IHTS 7304.59.20 was not representative of DP-Master’s DPGT. Pis.’ Br. at 17. According to Plaintiffs, 70% of DP-Master’s DPGT was of the diameter covered by IHTS 7304.59.10. Id. As Infodrive data indicated that DPGT did not enter India under IHTS 7304.59.10, and IHTS 7304.59.20 does not correspond to 70% of DP-Master’s merchandise, Plaintiffs insist that the surrogate value should not apply to that merchandise. See Pis.’ Br. at 17-18.
This argument is unconvincing. As noted above, determining a surrogate value is “difficult and necessarily imprecise.” Nation Ford Chem. Co.,
C. AUV of Entries Under IHTS 7304.59.20
Third, Plaintiffs argue that Commerce failed to address its claim that the $4,978.08/MT AUV of IHTS 7304.59.20 entries was “aberrantly high.” See Pis.’ Cmts. at 18. According to Plaintiffs, record evidence demonstrated that DPGT comprises approximately 30% of the value of finished drill pipe. Id. at 20. Because the AUV for IHTS 7304.59.20 entries is nearly double the $2,511.67/MT AUV for entries of finished and semi-finished ■ drill pipe under IHTS 7304.23, Plaintiffs insist that “no reasonable mind could accept this value.” Id. at 18.
“ ‘[W]hen confronted with a color-able claim that the data that Commerce is considering is aberrational, Commerce must examine the data and provide a reasoned explanation as to why the data it chooses is reliable and non-distortive.’ ” See Xinjiamei Furniture (Zhangzhou) Co. v. United States, 37 CIT -, -, Slip Op. 13-30 at 10,
Commerce clearly addressed this argument in the Remand Results, finding that Plaintiffs’ “previous arguments indicate that [IHTS 7304.23] is much broader than finished drill pipe, and is not a reliable indicator of the value of finished drill pipe.” Remand Results at 14. Specifically, Commerce noted that Plaintiffs “previously explained that some line items under [IHTS] category 7304.23.90 may be of drill pipe tools, other drill pipe products, or inputs of either.” Id. at 14-15 (internal quotation marks omitted). Additionally, the Court acknowledged in Downhole I that IHTS 7304.23.90 contains entries of “seamless pipe” and other products. See Downhole I, 33 CIT at -,
D. The NIS Memo
Plaintiffs argue that Commerce’s determination was unreasonable because the NIS Memo was the “sole factual justification.” Pis.’ Cmts. at 8. The NIS Memo reads: “During the week of January 7, 2013, [Commerce] contacted Mary Ellen Laker, [CBP] National Import Specialist, regarding the HTS classification of [DPGT], as described in the scope of the Order. She confirmed that [DPGT] would be categorized under HTS 7304.59.”
Finally, Plaintiffs argue that Commerce “wrongly dismissed” the other alternative surrogate values on the record. Pis.’ Cmts. at 21. Incorporating by reference their pre-draft remand comments, Plaintiffs insist that the price data for P1110 and J/K 55, as well as the adjusted values for alloyed steel billets and seamless tubes, are all superior to the data Commerce selected. Id. at 21-23. Plaintiffs add that, contrary to Commerce’s findings, the data from these sources would require little if any adjustment to calculate a surrogate value for DPGT. See id. at 23.
Plaintiffs’ argument is unconvincing. First, contrary to Plaintiffs’ insistence, Commerce did not rely solely on the NIS Memo in its analysis. As noted above, Commerce fell back on IHTS 7304.59.20 after reasonably concluding that it was more representative of DPGT than the other IHTS classifications on the record. See Draft Results at 5-6, 15-16; Remand Results at 14-18. With specific regard to the NIS Memo, Commerce explained that it “confirmed” this analysis with the CBP official. See NIS Memo at 1; Remand Results at 15-16.
Second, Plaintiffs’ argument is entirely conjectural. Plaintiffs insist that the NIS Memo contains several possible flaws, but fail to identify any evidence in the record supporting their assertions. See Pis.’ Cmts. at 9-12. Accordingly, their argument simply invites the court to reweigh evidence. However, “[t]he court’s role is not to reweigh evidence,” Fedmet Res. Corp. v. United States, 37 CIT -, -,
II. Commerce Reasonably Rejected the Alternative Surrogate Values on the Record
As noted above, when selecting a surrogate value, Commerce “normally will use publicly available information” from a single country, see 19 C.F.R. § 351.408(c)(1), (2), and it “prefers data that reflects a broad market average, is
Commerce rejected Metal Bulletin Research price data for J/K 55 because J/K 55 is not an input for drill pipe and was “at best comparable” to DPGT. Draft Results at 8 (unchanged in Remand Results). Moreover, the J/K 55 data did not reflect actual sales prices, was not contemporaneous with the period of investigation, and covered only one month of prices. Id. (unchanged in Remand Results). Therefore, Commerce reasonably concluded that J/K 55 data did not satisfy its selection criteria. See Fuwei Films, 36 CIT at -,
Commerce rejected the P1110 price data for similar reasons, finding that P1110 is not representative of DPGT because it is a “finished OCTG product” that cannot be used as an input for drill pipe. Draft Results at 9 (unchanged in Remand Results ). Additionally, the P1110 data was based on offers and only covered one month of price information. Id. at 9 (unchanged in Remand Results). Accordingly, Commerce reasonably determined that the P1110 data was not the best available information. See Fuwei Films, 36 CIT at -,
Commerce also rejected adjusted values for alloy steel billets and seamless tubes, finding that the record lacked sufficient information to adjust the values for the required alloying costs and that calculating such adjustments required proprietary information. See Draft Results at 9-12 (unchanged in Remand Results). Plaintiffs contest this finding, arguing that the cost of alloying elements for steel billets and seamless tubes is minimal and therefore the values for these products are the most accurate on the record. See Pis.’ Cmts. at 22-23. Plaintiffs fail to address Commerce’s finding that these adjustments, however small, require proprietary information. See Remand Results at 17. Because its regulations direct it to use “publicly available information,” 19 C.F.R. § 351.408(c)(1), Commerce reasonably rejected these adjusted values.
In contrast, Commerce found that the IHTS 7304.59.20 data is “contemporaneous with the [period of investigation], represents] a broad market average, [is] tax and duty exclusive, and [is] publicly available, thus comporting with [its] selection criteria.” Draft Results at 16; see also Remand Results at 14. And, as noted above, Commerce determined that IHTS 7304.59.20 was the surrogate value most representative of DPGT. See Draft Results at 5-6, 15-16; Remand Results at 14-18. Accordingly, Commerce reasonably concluded that IHTS 7304.59.20 was the best available information on the record. See 19 C.F.R. § 351.408(c)(1), (2); Fuwei Films, 36 CIT at -,
CONCLUSION
For the foregoing reasons, Commerce’s remand redetermination is sustained in its entirety. Judgment will be entered accordingly.
Notes
. On remand, Commerce selected data from "Chapter 6A: Labor Cost in Manufacturing” in the ILO Yearbook for India as the surrogate value for the labor wage rate. Remand Results at 18. Plaintiffs do not allege error in their submission to the court. See Pis.’ Comments on Remand Redetermination ("Pis.’ Cmts.”).
. IHTS 7304.59.10 and 7304.59.20 differ only in terms of the size of the tubes they cover: IHTS 7304.59.10 covers tubes with diameters up to 114.3 mm, while IHTS 7304.59.20 covers tubes with diameters between 114.3 mm and 219.1 mm. Remand Results at 5.
. All further citations to the Tariff Act of 1930 are to the relevant provisions of Title 19 of the United States Code, 2006 edition, and all applicable supplements thereto.
. GRI 2(a) reads: "Any reference in a heading to an article shall be taken to include a reference to that article incomplete or unfinished, provided that, as entered, the incomplete or unfinished article has the essential character of the complete or finished article.”
. Plaintiffs also fail to provide guidance on why CBP regulations should apply to the classification of DPGT under IHTS categories over Indian laws and regulations. The court need not address this matter because Commerce's selection of I'HTS 7304.59.20 was reasonable on the basis of the record as a whole.
. The "Order " Commerce referred to is Drill Pipe From the PRC: Antidumping Duty Order, 76 Fed.Reg. 11,757 (Mar. 3, 2011), which is based, in part, on the Final Determination.
