599 F.2d 1015 | C.C.P.A. | 1979
This is an appeal from the judgment of the United States Customs Court, 81 Cust. Ct. 1, C.D. 4755, 455 F. Supp. 618 (1978), holding certain dacron polyester fabrics to be properly classified under item 338.30
Background,
This appeal involves certain dacron polyester fabrics which were manufactured in the United States, exported to Canada as greige goods for further processing, and then imported back into the United
Customs Court
In its opinion, the Customs Court summarized the Canadian processing steps as follows:
The essential facts concerning the processing operation in Canada are not in dispute. The domestic loom product is exported as greige goods in rolls of approximately 800 to 1,000 yards in length and approximately 118 to 119% inches in width. It is returned as finished jabric suitable for manufacture into curtains, folded over double, widthwise, and cut in lengths of approximately 60 to 80 yards. In Canada the greige goods are subjected to a number of operations, consisting of heat-setting, chemical-scouring, dyeing and heat-setting a second time during which finishing chemicals consisting of melamine- resin for anticreasing characteristics, an antistatic chemical, and a softener chemical are applied to the fabric in this final stage. The initial heat-setting treatment serves to stabilize the fabric through the elimination of shrinkage. Scouring removes sizing and impurities from the fabric. And the second heat-setting treatment induces a permanent adherence of the finishing chemicals to the fabric during the drying stage of the processing. The finished fabric is then inspected, folded and shipped back to the United States. [Footnotes omitted. 81 Oust. Ct. at 2, 455 F. Supp. at 619.]
Upon considering the testimony and exhibits proffered during the trial, the court concluded that the greige goods and finished fabrics differed in name; that the finished fabrics were softer and more full than the greige goods; that the finished fabrics were sold for $1.50 to $1.60 per yard more than the greige goods; that the griege goods and finished fabrics differed in size; and that the greige goods and finished fabrics were sold to different classes of buyers and in different commercial markets. Citing A. F. Burstrom v. United States, 44 CCPA 27, C.A.D. 631 (1957), the court held the processing in Canada did not merely amount to alterations under 806.20 because the imported finished fabrics were not the same articles as the exported griege goods since they differed in name, value, appearance, size, shape, and use.
The court also relied on Burstrom, swpra, to dispose of appellant’s argument that the Canadian processing merely resulted in an altera
The court is of the opinion that where, as here, foreign processing of an exported article, to whatever degree, produces such changes in the performance characteristics of the exported article as to alter its subsequent handling and uses over that which earlier prevailed, the resultant product is of necessity a new and different article. [81 Cust. Ct. at 5, 455 F. Supp. at 622.]
Appellant’s Arguments
In support of his alternative classification, appellant cites the following definition of the phrase “repairs or alterations” from the Treasury regulations in effect at the time the entries in issue were filed:
The term “repairs or alterations” shall be held to mean restoration, change, addition, renovation, cleaning, or other treatment which does not destroy the identity of the article exported or create a new or different article.
According to appellant, this definition means that processing which effects some change or addition to an article can be considered an “alteration” as long as the article remains basically the same. Appellant argues that the articles in question remained basically the same because both the greige goods and finished fabrics were manmade fabrics of polyester fiber and, thus, the Canadian processing steps did not change the essential characteristics of the fabrics.
Appellant further contends a reasonable interpretation of 806.20 contemplates changes in articles which result in advancements in value or improvements in condition and, therefore, the mere fact that the Canadian processing resulted in changes in name, appearance, value, size, shape, and use does not require a determination that such processing did not comprise alterations within the meaning of 806.20.
In its brief, appellee cites testimony in tbe record supporting tbe Customs Court’s determination that tbe greige goods differed from tbe finished fabrics in name, value, appearance, size, shape, and use. Appellee also alleges that the Canadian processing limited tbe number of potential uses of tbe greige goods to tbe single use for tbe finished fabric, i.e., as curtain material. Further, appellee agrees with tbe Customs Court’s conclusion that where, as here, tbe foreign processing has created a new article, tbe fact that tbe article as exported and tbe article as imported are classifiable under tbe same TSUS item is immaterial. Finally, appellee notes that to extend this argument of appellant to its logical conclusion would necessarily mean that bad tbe Canadian processing transformed tbe fabrics into curtains, wearing apparel or tbe hke, such processing would also be mere alterations because these articles would also be comprised of manmade fabrics of polyester fabric.
Opinion
Appellant correctly contends that simply because intermediate foreign processing of articles of U.S. origin that are subsequently reimported into tbe U.S. results in differences in name, value, appearance, size, shape, and use for the articles does not require a conclusion that tbe foreign processing does not comprise “alterations” under TSUS item 806.20. This is self-evident from this tariff provision which levies a duty only on tbe increase in value due to tbe alterations. Similarly, to bold that alterations cannot change tbe name, appearance, size, shape, and use of an article unreasonably restricts tbe scope of item 806.20.
Being correct on this one point, however, does not save appellant’s case because, as noted in Burstrom, supra at 31, a “distinction which must be made is between tbe terms ‘repairs,’ ‘alterations’ and ‘processing.’ ”
That such a distinction has been recognized by Congress is apparent from tbe Customs Simplification Act of 1954, chapter 1213, Public Law No. 768,68 Stat. 1137, which extended to certain foreign processing operations, tbe tariff treatment previously accorded to repairs and alterations.
[I]t appears that, in the case of articles sent by U.S. manufacturers along the Canadian border to Canada, for processing and return to the United States for additional processing, duty was imposed on not only the value of the Canadian processing but also on the value of the article in its original exported form. Such treatment was based on subparagraph 1615(g) of the Tariff Act of 1930, as amended by the 1938 act, with interpretation by the Customs Service of “repairs” and “alterations” being limited chiefly to those of a mechanical nature on equipment such as •locomotives and buses. It was objected that imposing duty on the value of the article in its original exported form constituted a duty on American material and American labor. Hearings on H.B. 5106 Before the House Comm. on Ways and Means, 83d Cong., 1st Sess., 199-200 (1953).
In addition to that observation, two things are evident from the very language (see supra note 6) of the provision. First, it applies to intermediate processing operations which are performed abroad as a matter of course in the preparation of certain articles. Second, this advantageous tariff treatment for regularly performed intermediate foreign processing is limited to articles made of metal.
It follows generally from these two points that repairs and alterations are made to completed articles and do not include intermediate processing operations which are performed as a matter of course in the preparation or the manufacture of finished articles. In the instant situation, the operations performed in Canada comprise further processing steps which are performed on unfinshed goods and which lead to completed articles, i.e., the finished fabrics, and, therefore, the processing cannot be considered alterations.
This view is consistent with this court’s previous interpretation of the term “alterations” in United States v. The J. D. Richardson Company, 36 CCPA 15, C.A.D. 390 (1948). At issue in that case was the question of whether the processing performed in Canada on a U.S. origin metal wheel rim resulting in flanged rims for importation into the United States constituted “alterations” under paragraph 1615(g).
The court stated:
It clearly appears from the record that the articles exported to Canada were not parts of machines .but were manufactures of metal. It is true that they had been so processed as to be dedicated to the use of making rims for the T-26 tank. However, they were not completed parts but, on the contrary, required the manufacturing processes hereinbefore referred to in order to complete them as “flanged” rims for their intended use. Broadly, it may be said, as seems to have been held by the trial court, that the term “alterations” of articles means any manufacturing process to*83 which articles may be subjected. We are of opinion, however, that Congress did not intend by the term “alterations” in paragraph 1615(g), supra, to mean that uncompleted articles, such as those here involved, manufactured in the United States or imported into the United States, could be exported to a foreign country and there manufactured into completed articles such as those in the case at bar, and when returned to the United States, be subject only to duties on the so-called “alterations” provided for in paragraph 1615(g), supra. [Id. at 17. Italics ours.]
The case law also includes two examples of foreign processing which merely involved alterations to finished goods. In Wilbur G. Hallauer v. United States, 40 CCPA 197, C.A.D. 518 (1953), this court determined that the cleaning, grading, wrapping, and packing in Canada of American-grown apples constituted “alterations” within the meaning of the then applicable paragraph 1615(g). Appellant had claimed that no duty should be imposed because “apples went out and apples came back.” Id. at 201. Although the court did not dispute the fact that the apples were complete when exported to Canada, it concluded that the Canadian operations had converted the articles from bulk apples to a .different unit of merchandise, packaged apples, and that a duty could be imposed on the resultant increase in value.
In a case of particular relevance to the instant appeal, the Customs Court in Amity Fabrics, Inc. v. United States, supra, held that the dyeing of certain fabrics comprised an alteration under paragraph 1615(g). In that case, velveteen fabric had been dyed a particular color and placed on sale in the United States. The color proved to be unpopular and, as a result, the fabric was exported to Italy, dyed black, and then imported back into the United States and placed on sale. The court concluded that this processing was an alteration of an already finished fabric to place it in a more marketable condition without either destroying its identity or creating a new article.
In the instant situation, the dyeing and numerous other processing steps are all necessarily undertaken to initially produce the finished fabric and, thus, a result different from that in Amity, supra, must be reached.
Finally, we find no merit in appellant’s argument that because both the greige goods and finished fabrics are manmade fabrics of polyester fiber and would be classifiable under the same TSUS item, the Canadian processing merely comprised alterations. The irrelevance of such common classification was noted by this court in Burstrom, supra at 30, when we stated:
*84 Appellant attempts to distinguish the instant case from United States v. The J. D. Richardson Company, 36 C.C.P.A. (Customs) 15, C.A.D. 390. The court there held that unflanged rims or flat bands exported from this country and reimported after being flanged by three pressing operations, had been changed to new articles and had not merely been altered. Here the foreign processing has likewise created new articles and the law of the Richardson case applies. Appellant argues that the fact that the exported ingots and the imported slabs, in the instant case, would be dutiable under the same paragraph distinguishes this case from the Richardson case where the exported and imported wares were subject to different duties. This difference is immaterial where the foreign processing has created a new article.
Further, to follow appellant’s reasoning could lead to the anomalous result that all articles made from the finished fabric would be commonly classified because they would also be manmade fabrics of polyester fiber.
Conclusion
The Canadian processing operations did not comprise alterations under item 806.20 TSUS. The judgment of the Customs Court is affirmed.
Item 338.30 provides as follows:
schedule 3 — TEXTILE FIBERS AND TEXTILE PRODUCTS
Part 3. Woven Fabrics
• • * * * • •
Subpart E. Woven Fabrics, of Man-Made Fibers
*******
338.30 Other_______ [Applicable Rate]
Item 800.20 provides as follows:
SCHEDULE 8. — SPECIAL CLASSIFICATION PROVISIONS
Part 1. Articles Exported and Returned
Subpart B. Articles Advanced or Improved Abroad
• *•••**
Articles returned to the United States after having been exported to be advanced in value or improved in condition by any process of manufacture or other means:
806.20 Articles exported for repairs or alterations_ A duty upon the value of the repairs or alterations.
Mr. Chace, president of the manufacturer of the goods in question, Berkshire Hathaway Inc. of New Bedford, Mass., testified before the Customs Court that the exportation of the goods to Canada was necessary Because the only processor with the proper equipment to accommodate the fabric was located in Canada. During the course of his testimony, Mr. Chace also explained the processing steps performed in the United States which resulted in the manufacture of the greige goods.
This definition first appeared in 89 Treas. Dec. 263, T.D. 53611 (Sept. 30, 1954). The definition referred to paragraph 1615(g) of the Tariff Act of 1930, ch. 497, Public Law No. 361, 46 Stat. 674, as amended by the Customs Administrative Act of 1938, ch. 679, Public Law No. 721, 52 Stat. 1092, to extend to articles exported for alterations the same treatment then accorded to articles exported to be repaired. See H. Kept. No. 1429, 75th Cong., 1st Sess. 6 (1937). This subparagraph was adopted as item 806.20 TSUS as a result of the Tariff Classification Act of 1962, Public Law No. 87-456, 76 Stat. 72. See Tariff Classification Study, schedule 8, p. 12 (Nov. 15, 1960.)
The definition of “repairs and alterations” was deleted from he regulations by 6 Cust. Bull. 209, T.D. 72-119 (May 2, 1972).
According to evidence in the record, the fabric was intended to be used as material for making curtains. In his testimony, Mr. Chace stated that the greige goods could be used as curtain material but that it differed from the finished fabrics in resistance to wrinkling and shrinking, drapability, and choice of colors.
This provision has been incorporated into the TSUS as item 806.30 which provides:
806.30 Any article oí metal (except precious metal) manufactured in the United States or subjected to a process of manufacture in the United States, if exported for further processing, and if the exported article as processed outside the United States, or the article which results from the processing outside the United States, is returned to the United States for further processing_ A duty upon the value of such processing outside the United States (see headnote 2 of this subpart).
For another Customs Court opinion holding that certain processing operations did not merely comprise alterations within paragraph 1615(g), see C. J. Tower & Sons of Niagara, Inc. v. United States, 45 Cust. Ct. 111, C.D. 2208, 177 F. Supp. 470 (1960), wherein the court reviewed processing steps performed in Canada on American origin cotton greige goods that resulted in finished fabrics of different colors, sizes, porosities, thread distributions, weights, tensile strengths, textures, and finishes.