MEMORANDUM OPINION AND ORDER ADOPTING IN PART AND REJECTING IN PART THE MAGISTRATE JUDGE’S REPORT AND RECOMMENDATION
Plаintiffs James and Sue Chmielewski filed this diversity action in September 1995 against defendants Stryker Sales Corporation and its subsidiary Osteonics Corporation, maker of the “Omni Fit” hip prosthesis. Plaintiffs alleged negligence and strict liability for design and manufacturing defects in the prosthesis, failure to warn, breach of express and implied warranties, and loss of consortium. Defendants moved for dismissal on the grounds that plaintiffs’ claims are expressly preempted by the Medical Device Amendments (MDA), 21 U.S.C. § 360c.
Because the parties submitted materials in ■ addition to the pleadings, Magistrate Judge Raymond L. Erickson treated the motion as one for summary judgment under Fed. R.Civ.P. 56. In a Report and Recommendation dated April 2, 1996, the Magistrate Judge recommended granting summary judgment in favor of defendants on each of plaintiffs’ claims. Plaintiffs objectеd to the Magistrate Judge’s recommendation.
Before this Court rendered a decision on plaintiffs’ objections, the Supreme Court decided
Lohr v. Medtronic, Inc.,
— U.S.-,
Pursuant to 28 U.S.C. § 636(b)(1)(C) and D. Minn. LR 72.1(e)(2), the Court reviews de novo each of plaintiffs’ objections to the Report and Rеcommendation on this dispositive motion. Summary judgment is warranted “if the pleadings, depositions, answers to interrogatories, and admissions on file, together with the affidavits, if any, show that there is no genuine issue as to any material fact and the moving party is entitled to judgment as a mаtter of law.” Fed.R.Civ.P. 56. After considering each of plaintiffs’ objections, the Court adopts the Magistrate Judge’s recommendation in most respects, but rejects it as to plaintiffs’ negligent manufacturing and loss of consortium claims.
FACTS
In 1976, Congress enacted the Medical Device Amendments to the Food, Drug and Cosmetic Act of 1938. 21 U.S.C. § 360e. Under the power granted to it by the MDA, the Food and Drug Administration groups medical devices into three classes. Class III devices are the most heavily regulated and require manufacturers to undergo a rigorous approval process known as “premarket approval.” 21 U.S.C. § 360e(d)(2).
Manufacturers of experimental Class III devices may apply for an investigational device exemption (IDE). 21 C.F.R. § 812.1(a). Devices sold pursuant to an IDE are exempt from the premarket apprоval process, and exempt from the FDA’s good manufacturing regulations, performance standards requirements, and regulations against misbranded devices. Id.
The process for granting an IDE is comprehensive. An IDE application must include, among other things, a description of the methods, facilities, and controls used for the manufacture, processing, packing, and storage of the device, in addition to a complete report of prior investigations of the device. 21 C.F.R. § 812.20. Manufacturers must also submit a written protocol of thе study’s methodology, a description of each component, and copies of all labeling and informational materials required for the patient’s consent. 21 C.F.R. § 812.25.
The MDA contains an express preemption provision:
Except as provided in subsection (b) of this section, no State or political subdivision of a Statе may establish or continue in effect with respect to a device intended for human use any requirement—
(1) which is different from, or in addition to, any requirement applicable under this chapter to the device, and
(2) which relates to the safety or effectiveness of the device or to any other matter included in a requirement applicable to the device under this chapter.
21 U.S.C. § 360k(a).
In January, 1985, the FDA granted an IDE to defendant Osteonics Corporation to market its “Omni Fit” hip prosthesis. Plaintiff James Chmielewski was surgically implanted with this hip prоsthesis on December 26, 1985. In accordance with FDA requirements for IDEs, plaintiff signed an informed consent form prior to surgery. On October 2, 1992, plaintiff suddenly collapsed due to a break in the femoral component of the prosthesis.
ANALYSIS
In recommending summary judgment for defendants, the Magistrate Judge relied on the difference between the
Lohr
device’s approval process and the IDE approval process.
Lohr
involved a device approved pursuant to the “substantial equivalency” process.
Lohr,
— U.S. at-,
The
Lohr
Court followed the FDA’s preemption regulation in finding none of the plaintiffs claims preempted: “[Sjtate requirements are pre-empted ‘only1 when the FDA has established ‘specific counterpart regulations or ... other specific require
*842
ments applicable to a particular device’ ... [T]he statute is not intended to pre-empt ‘[s]tate or local requirements of general applicability where the purpose of the requirement relates ... to other products in addition to devices.’ ”
Id.
at-,
The
Lohr
Court determined that the “substantial equivalency” process did not create device-specific federal requirements, and the FDA’s general manufacturing and labeling regulаtions were not specific enough to preempt state law.
Id.
at-,-,
The Magistrate Judge distinguished Lohr on the basis that the IDE approval process, unlike the “substantial equivalency” process, imposes device-specific federal requirements. Thus, he concluded that allowing plaintiffs to maintain their claims would create state requirements which conflict with sрecific federal requirements.
Plaintiffs object to the Magistrate Judge’s recommendation on three grounds. First, they contend that state common law duties are not “specifically developed “with respect to’ medical devices” and thus, under Lohr, are not prеempted. Second, they argue that, under the FDA preemption regulation, the MDA does not preempt state laws of general applicability. Third, they assert that, under Lohr, their claims are not preempted to the extent that they coincide with federal requiremеnts.
1. Specificity of State Common Law Duties
The Court agrees with the Magistrate Judge that common law claims which conflict with specific federal requirements are preempted, regardless of the general nature of the law from which the claims arise. Plaintiffs are correct that
Lohr
discusses the need fоr both a specific federal regulation and a specific state requirement for preemption to occur.
Lohr,
— U.S. at-,
Justice Breyer, however, dissented from the plurality’s conclusion that common law claims would rarely be preempted by the MDA, arguing that such claims can impose device-specific requirements that differ from federal requirements.
Lohr,
— U.S. at -,-,
To make sense of this paradox, it is important to note that, in
Lohr,
the Court found no specific federal requirements applicable to the device.
Lohr,
— U.S. at-, -,
Since
Lohr,
most circuit courts that have addressed this issue have relied on the lack of specific federal requirements to find that the state claims were nоt preempted.
See Reeves v. AcroMed Corp.,
The Eighth Circuit has not addressed MDA preemption since
Lohr.
In
Martello v. Ciba Vision Corp.,
however, the Eighth Circuit similarly found that common law tort claims that impose requirements different from device-specific federal requirements are preempted.
Martello v. Ciba Vision Corp.,
Given the intense nature of the IDE approval process, most courts agree that it imposes device-specific federal requirements.
See Martin,
Similarly, plaintiffs’ negligent design and failure to warn claims would allow a jury to find fault with the prosthesis’ design and labeling. The FDA, however, approved the prosthesis’ design and labeling for experimental use. Plaintiffs’ negligent design and labeling claims would thus also impose different or additional state requirements on defendants and are therefore also preempted.
2. FDA Preemption Regulation
Plaintiffs object that under the FDA’s preemption regulatiоn, § 360k(a) does not preempt state laws of general applicability. See 21 C.F.R. § 808.1(d). As noted above, however, a strict application of this interpretation would be inconsistent with the Lohr Court’s actual treatment of MDA preemption. The Court therefore rejects plаintiffs’ objection that the FDA’s interpretation of § 360k(a) precludes the grant of summary judgment to defendants as to their strict liability, negligent design, and failure to warn claims.
3. Equivalent State and Federal Requirements
Plaintiffs assert that, to the extent that their claims rest on duties equivalent to duties imposed under federal regulations, thеy are not preempted. The
Lohr
decision, as well as a number of subsequent lower court cases, support this assertion.
Lohr,
— U.S. at-,
While plaintiffs have not specifically alleged that defendants failed to follow federal regulations, they have submitted evidence purрorting to show that the metal in the prosthesis was not properly processed. Assuming that plaintiffs can show that this alleged processing defect violates FDA standards, their negligent manufacturing claim would not conflict with federal law and thus would not be preempted.
See Lohr,
— U.S. at-,
*844 The Court has also considered whether plaintiffs’ breach of express and implied warranty claims rest on duties equivalent to federal requirements. Although plаintiffs theoretically could make this argument, they have not done so. Furthermore, they point to nothing in the record which supports their claim that defendants made express warranties about the condition of the prosthesis. The Court therefore defers to the Magistrаte Judge’s recommendation and grants summary judgment to defendants on plaintiffs’ breach of express and implied warranty claims.
Because the Magistrate Judge concluded that all of plaintiffs’ product liability claims were preempted, he recommended granting summary judgment on plaintiffs’ loss of consortium claim as well. Since plaintiffs’ negligent manufacturing claim survives summary judgment, however, plaintiffs can maintain their loss of consortium claim.
ORDER
Accordingly, based on the above and all the files, records, and proceedings herein, IT IS HEREBY ORDERED that the Magistrate Judge’s Report and Recommendation [Docket No. 27] is ADOPTED IN PART and REJECTED IN PART as follows:
1. Defendants’ motion for summary judgment [Docket No. 4] is GRANTED as to plaintiffs’ strict liability, negligent design, failure to warn, and breach of express and implied warranty claims.
2. Defendants’ motion for summary judgment [Docket No. 4] is DENIED as to plaintiffs’ negligent manufacturing and loss of consortium claims.
